اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدChannel thickness optimization for ultra thin and 2D chemically doped TFETs
121
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
2D material based tunnel FETs are among the most promising candidates for low power electronics applications since they offer ultimate gate control and high current drives that are achievable through small tunneling distances during the device operation. The ideal device is characterized by a minimized tunneling distance. However, devices with the thinnest possible body do not necessarily provide the best performance. For example, reducing the channel thickness increases the depletion width in the source which can be a significant part of the total tunneling distance. Hence, it is important to determine the optimum channel thickness for each channel material individually. In this work, we study the optimum channel thickness for three channel materials: WSe$_{2}$, Black Phosphorus (BP), and InAs using full-band self-consistent quantum transport simulations. To identify the ideal channel thickness for each material at a specific doping density, a new analytic model is proposed and benchmarked against the numerical simulations.
قيم البحث
اقرأ أيضاً
We report on detailed room temperature and low temperature transport properties of double-gate Si MOSFETs with the Si well thickness in the range 7-17 nm. The devices were fabricated on silicon-on-insulator wafers utilizing wafer bonding, which enabl
ed us to use heavily doped metallic back gate. We observe mobility enhancement effects at symmetric gate bias at room temperature, which is the finger print of the volume inversion/accumulation effect. An asymmetry in the mobility is detected at 300 K and at 1.6 K between the top and back interfaces of the Si well, which is interpreted to arise from different surface roughnesses of the interfaces. Low temperature peak mobilities of the reported devices scale monotonically with Si well thickness and the maximum low temperature mobility was 1.9 m2/Vs, which was measured from a 16.5 nm thick device. In the magneto transport data we observe single and two sub-band Landau level filling factor behavior depending on the well thickness and gate biasing.
We demonstrate a selectively emitting optical Fabry-Perot resonator based on a few-nm-thin continuous metallic titanium nitride film, separated by a dielectric spacer from an optically thick titanium nitride back-reflector, which exhibits excellent s
tability at 1070 K against chemical degradation, thin-film instabilities and melting point depression. The structure paves the way to the design and fabrication of refractory thermal emitters using the well-established processes known from the field of multilayer and rugate optical filters. We demonstrate that a few-nanometer thick films of titanium nitride can be stable under operation at temperatures exceeding 1070 K. This type of selective emitter provides a means towards near-infrared thermal emission that could potentially be tailored to the accuracy level known from rugate optical filters.
Here, we propose a method to determine the thickness of the most common transition metal dichalcogenides (TMDCs) placed on the surface of transparent stamps, used for the deterministic placement of two-dimensional materials, by analyzing the red, gre
en and blue channels of transmission-mode optical microscopy images of the samples. In particular, the blue channel transmittance shows a large and monotonic thickness dependence, making it a very convenient probe of the flake thickness. The method proved to be robust given the small flake-to-flake variation and the insensitivity to doping changes of MoS2. We also tested the method for MoSe2, WS2 and WSe2. These results provide a reference guide to identify the number of layers of this family of materials on transparent substrates only using optical microscopy.
We present the results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the seemingly universal observation of decreasing friction with increasing number of layers on two-dimensional
(2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e. inverse dependency on the number of layers. Raman spectroscopy measurements revealed signatures of Re intercalation, leading to a decoupling between neighboring MoS2 layers and enhanced electron-phonon interactions, thus resulting in increasing friction with increasing number of layers: a new paradigm in the mechanics of 2D materials.
Triple heterojunction (THJ) TFETs have been proposed to resolve the low ON-current challenge of TFETs. However, the design space for THJ-TFETs is limited by fabrication challenges with respect to device dimensions and material interfaces. This work s
hows that the original THJ-TFET design with 12 nm body thickness has poor performance, because its sub-threshold swing is 50 mV/dec and the ON-current is only 6 $mu A/mu m$. To improve the performance, the doping profile of THJ-TFET is engineered to boost the resonant tunneling efficiency. The proposed THJ-TFET design shows a sub-threshold swing of 40 mV/dec over four orders of drain current and an ON-current of 325 uA/um with VGS = 0.3 V. Since THJ-TFETs have multiple quantum wells and material interfaces in the tunneling junction, quantum transport simulations in such devices are complicated. State-of-the-art mode-space quantum transport simulation, including the effect of thermalization and scattering, is employed in this work to optimize THJ-TFET design.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
