اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigh-Responsivity Photodetection by Self-Catalyzed Phase-Pure P-GaAs Nanowire
71
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to absence of stacking faults and suppression of large amount of defects with deep energy levels, the photodetector exhibits room-temperature high photo responsivity of 1.45 x 105 A W^-1 and excellent specific detectivity (D*) up to 1.48 x 10^14 Jones for low-intensity light signal of wavelength 632.8 nm, which outperforms previously reported NW-based photodetectors. These results demonstrate that these self-catalyzed pure-ZB GaAs NWs to be promising candidates for optoelectronics applications.
قيم البحث
اقرأ أيضاً
We report observation of field emission from self-catalyzed GaAs nanowires grown on Si (111). The measurements are realized inside a scanning electron microscope chamber with nano-controlled tungsten tip functioning as anode. Experimental data are an
alyzed in the framework of Fowler-Nordheim theory. We demonstrate stable current up to 10$^{-7}$ A emitted from the tip of single nanowire, with field enhancement factor $beta$ up to 112 at anode-cathode distance d=350 nm. A linear dependence of $beta$ on the anode-cathode distance is experimentally found. We also show that the presence of a Ga catalyst droplet suppresses the emission of current from the nanowire tip. This allows detection of field emission from the nanowire sidewalls, which occurs with reduced field enhancement factor and stability. This study further extends the GaAs technology to vacuum electronics applications.
It is well known that the crystalline structure of the III-V nanowires (NWs) is mainly controlled by the wetting contact angle of the catalyst droplet which can be tuned by the III and V flux. In this work we present a method to control the wurtzite
(WZ) or zinc-blende (ZB) structure in self-catalyzed GaAs NWs grown by molecular beam epitaxy, using in situ reflection high energy electron diffraction (RHEED) diagram analysis. Since the diffraction patterns of the ZB and WZ structures differ according to the azimuth [1-10], it is possible to follow the evolution of the intensity of specific ZB and WZ diffraction spots during the NW growth as a function of the growth parameters such as the Ga flux. By analyzing the evolution of the WZ and ZB spot intensities during some NW growths with specific changes of Ga flux, it is then possible to control the crystal structure of the NWs. ZB GaAs NWs with a controlled WZ segment have thus been realized. Using a semi-empirical model for the NW growth and our in situ RHEED measurements, the critical wetting angle of the catalyst droplet for the structural transition is deduced.
Difficulties in obtaining high-performance p-type transistors and gate insulator charge-trapping effects present two major challenges for III-V complementary metal-oxide semiconductor (CMOS) electronics. We report a p-GaAs nanowire metal-semiconducto
r field-effect transistor (MESFET) that eliminates the need for a gate insulator by exploiting the Schottky barrier at the metal-GaAs interface. Our device beats the best-performing p-GaSb nanowire metal-oxide-semiconductor field effect transistor (MOSFET), giving a typical sub-threshold swing of 62 mV/dec, within 4% of the thermal limit, on-off ratio $sim 10^{5}$, on-resistance ~700 k$Omega$, contact resistance ~30 k$Omega$, peak transconductance 1.2 $mu$S/$mu$m and high-fidelity ac operation at frequencies up to 10 kHz. The device consists of a GaAs nanowire with an undoped core and heavily Be-doped shell. We carefully etch back the nanowire at the gate locations to obtain Schottky-barrier insulated gates whilst leaving the doped shell intact at the contacts to obtain low contact resistance. Our device opens a path to all-GaAs nanowire MESFET complementary circuits with simplified fabrication and improved performance.
Hybrid graphene photoconductor/phototransistor has achieved giant photoresponsivity, but its response speed dramatically degrades as the expense due to the long lifetime of trapped interfacial carriers. In this work, by intercalating a large-area ato
mically thin MoS2 film into a hybrid graphene photoconductor, we have developed a prototype tunneling photoconductor, which exhibits a record-fast response (rising time ~17 ns) and a high responsivity (~$3times10^4$ A/W at 635 nm and 16.8 nW illumination) across the broad spectral range. We demonstrate that the photo-excited carriers generated in silicon are transferred into graphene through a tunneling process rather than carrier drift. The atomically thin MoS2 film not only serves as tunneling layer but also passivates surface states, which in combination delivers a superior response speed (~3 order of magnitude improved than a device without MoS2 layer), while the responsivity remains high. This intriguing tunneling photoconductor integrates both fast response and high responsivity and thus has significant potential in practical applications of optoelectronic devices.
Achieving significant doping in GaAs/AlAs core/shell nanowires (NWs) is of considerable technological importance but remains a challenge due to the amphoteric behavior of the dopant atoms. Here we show that placing a narrow GaAs quantum well in the A
lAs shell effectively getters residual carbon acceptors leading to an emph{unintentional} p-type doping. Magneto-optical studies of such a GaAs/AlAs core multi-shell NW reveal quantum confined emission. Theoretical calculations of NW electronic structure confirm quantum confinement of carriers at the core/shell interface due to the presence of ionized carbon acceptors in the 1~nm GaAs layer in the shell. Micro-photoluminescence in high magnetic field shows a clear signature of avoided crossings of the $n=0$ Landau level emission line with the $n=2$ Landau level TO phonon replica. The coupling is caused by the resonant hole-phonon interaction, which points to a large 2D hole density in the structure.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
