اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFast Calibration of a Robust Model Predictive Controller for Diesel Engine Airpath
67
0
0.0
(
0
)
نشر من قبل
Gokul Siva Sankar Mr
تاريخ النشر
2018
مجال البحث
الهندسة المعلوماتية
والبحث باللغة
English
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A significant challenge in the development of control systems for diesel airpath applications is to tune the controller parameters to achieve satisfactory output performance, especially whilst adhering to input and safety constraints in the presence of unknown system disturbances. Model-based control techniques, such as model predictive control (MPC), have been successfully applied to multivariable and highly nonlinear systems, such as diesel engines, while considering operational constraints. However, efficient calibration of typical implementations of MPC is hindered by the high number of tuning parameters and their non-intuitive correlation with the output response. In this paper, the number of effective tuning parameters is reduced through suitable structural modifications to the controller formulation and an appropriate redesign of the MPC cost function to aid rapid calibration. Furthermore, a constraint tightening-like approach is augmented to the control architecture to provide robustness guarantees in the face of uncertainties. A switched linear time-varying MPC strategy with recursive feasibility guarantees during controller switching is proposed to handle transient operation of the engine. The robust controller is first implemented on a high fidelity simulation environment, with a comprehensive investigation of its calibration to achieve desired transient response under step changes in the fuelling rate. An experimental study then validates and highlights the performance of the proposed controller architecture for selected tunings of the calibration parameters for fuelling steps and over drive cycles.
قيم البحث
اقرأ أيضاً
Diesel airpath controllers are required to deliver good tracking performance whilst satisfying operational constraints and physical limitations of the actuators. Due to explicit constraint handling capabilities, model predictive controllers (MPC) hav
e been successfully deployed in diesel airpath applications. Previous MPC implementations have considered instantaneous constraints on engine-out emissions in order to meet legislated emissions regulations. However, the emissions standards are specified over a drive cycle, and hence, can be satisfied on average rather than just instantaneously, potentially allowing the controller to exploit the trade-off between emissions and fuel economy. In this work, an MPC is formulated to maximise the fuel efficiency whilst tracking boost pressure and exhaust gas recirculation (EGR) rate references, and in the face of uncertainties, adhering to the input, safety constraints and constraints on emissions averaged over some finite time period. The tracking performance and satisfaction of average emissions constraints using the proposed controller are demonstrated through an experimental study considering the new European drive cycle.
When multiple model predictive controllers are implemented on a shared control area network (CAN), their performance may degrade due to the inhomogeneous timing and delays among messages. The priority based real-time scheduling of messages on the CAN
introduces complex timing of events, especially when the types and number of messages change at runtime. This paper introduces a novel hybrid timing model to make runtime predictions on the timing of the messages for a finite time window. Controllers can be designed using the optimization algorithms for model predictive control by considering the timing as optimization constraints. This timing model allows multiple controllers to share a CAN without significant degradation in the controller performance. The timing model also provides a convenient way to check the schedulability of messages on the CAN at runtime. Simulation results demonstrate that the timing model is accurate and computationally efficient to meet the needs of real-time implementation. Simulation results also demonstrate that model predictive controllers designed when considering the timing constraints have superior performance than the controllers designed without considering the timing constraints.
In recent years, efficient optimization algorithms for Nonlinear Model Predictive Control (NMPC) have been proposed, that significantly reduce the on-line computational time. In particular, direct multiple shooting and Sequential Quadratic Programmin
g (SQP) are used to efficiently solve Nonlinear Programming (NLP) problems arising from continuous-time NMPC applications. One of the computationally demanding steps for on-line optimization is the computation of sensitivities of the nonlinear dynamics at every sampling instant, especially for systems of large dimensions, strong stiffness, and when using long prediction horizons. In this paper, within the algorithmic framework of the Real-Time Iteration (RTI) scheme based on multiple shooting, an inexact sensitivity updating scheme is proposed, that performs a partial update of the Jacobian of the constraints in the NLP. Such update is triggered by using a Curvature-like Measure of Nonlinearity (CMoN), so that only sensitivities exhibiting highly nonlinear behaviour are updated, thus adapting to system operating conditions and possibly reducing the computational burden. An advanced tuning strategy for the updating scheme is provided to automatically determine the number of sensitivities being updated, with a guaranteed bounded error on the Quadratic Programming (QP) solution. Numerical and control performance of the scheme is evaluated by means of two simulation examples performed on a dedicated implementation. Local convergence analysis is also presented and a tunable convergence rate is proven, when applied to the SQP method.
In order to enhance the performance of cyber-physical systems, this paper proposes the integrated de-sign of distributed controllers for distributed plants andthe control of the communication network. Conventionaldesign methods use static interfaces
between both enti-ties and therefore rely on worst-case estimations of com-munication delay, often leading to conservative behaviorof the overall system. By contrast, the present approachestablishes a robust distributed model-predictive controlscheme, in which the local subsystem controllers oper-ate under the assumption of a variable communicationschedule that is predicted by a network controller. Us-ing appropriate models for the communication network,the network controller applies a predictive network policyfor scheduling the communication among the subsystemcontrollers across the network. Given the resulting time-varying predictions of the age of information, the papershows under which conditions the subsystem controllerscan robustly stabilize the distributed system. To illustratethe approach, the paper also reports on the application to avehicle platooning scenario.
We develop a novel data-driven robust model predictive control (DDRMPC) approach for automatic control of irrigation systems. The fundamental idea is to integrate both mechanistic models, which describe dynamics in soil moisture variations, and data-
driven models, which characterize uncertainty in forecast errors of evapotranspiration and precipitation, into a holistic systems control framework. To better capture the support of uncertainty distribution, we take a new learning-based approach by constructing uncertainty sets from historical data. For evapotranspiration forecast error, the support vector clustering-based uncertainty set is adopted, which can be conveniently built from historical data. As for precipitation forecast errors, we analyze the dependence of their distribution on forecast values, and further design a tailored uncertainty set based on the properties of this type of uncertainty. In this way, the overall uncertainty distribution can be elaborately described, which finally contributes to rational and efficient control decisions. To assure the quality of data-driven uncertainty sets, a training-calibration scheme is used to provide theoretical performance guarantees. A generalized affine decision rule is adopted to obtain tractable approximations of optimal control problems, thereby ensuring the practicability of DDRMPC. Case studies using real data show that, DDRMPC can reliably maintain soil moisture above the safety level and avoid crop devastation. The proposed DDRMPC approach leads to a 40% reduction of total water consumption compared to the fine-tuned open-loop control strategy. In comparison with the carefully tuned rule-based control and certainty equivalent model predictive control, the proposed DDRMPC approach can significantly reduce the total water consumption and improve the control performance.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
