اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHighly thermally stable sub-20nm magnetic random-access memory based on perpendicular shape anisotropy
74
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A new approach to increase the downsize scalability of perpendicular STT-MRAM is presented. It consists in significantly increasing the thickness of the storage layer in out-of-plane magnetized tunnel junctions (pMTJ) as compared to conventional pMTJ in order to induce a perpendicular shape anisotropy (PSA) in this layer. This PSA is obtained by depositing a thick ferromagnetic (FM) layer on top of an MgO/FeCoB based magnetic tunnel junction (MTJ) so that the thickness of the storage layer becomes of the order or larger than the diameter of the MTJ pillar. In contrast to conventional spin transfer torque magnetic random access memory (STT-MRAM) wherein the demagnetizing energy opposes the interfacial perpendicular magnetic anisotropy (iPMA), in these novel memory cells, both PSA and iPMA contributions favor out-of-plane orientation of the storage layer magnetization. Using thicker storage layers in these PSA-STT-MRAM has several advantages. Thanks to the PSA, very high and easily tunable thermal stability factors can be achieved, even down to sub-10 nm diameters. Moreover, low damping material can be used for the thick FM material thus leading to a reduction of the write current. The paper describes this new PSA-STT-MRAM concept, practical realization of such memory arrays, magnetic characterization demonstrating thermal stability factor above 200 for MTJs as small as 8nm in diameter and possibility to maintain thermal stability factor above 60 down to 4nm diameter.
قيم البحث
اقرأ أيضاً
Interfacial Dzyaloshinskii-Moriya interaction in ferromagnet/heavy metal bilayers is recently of considerable interest as it offers an efficient control of domain walls and the stabilization of magnetic skyrmions. However, its effect on the performan
ce of perpendicular spin transfer torque memory has not been explored yet. We show based on numerical studies that the interfacial Dzyaloshinskii-Moriya interaction decreases the thermal energy barrier while increases the switching current. As high thermal energy barrier as well as low switching current is required for the commercialization of spin torque memory, our results suggest that the interfacial Dzyaloshinskii-Moriya interaction should be minimized for spin torque memory applications.
The perpendicular shape anisotropy-spin transfer torque-magnetic random access memories (PSASTT-MRAMs) takes advantage of the nanopillar free-layer geometry for securing a good thermal stability factor from the shape anisotropy of the nanomagnet. Suc
h a concept is particularly well-suited for small junctions down to a few nanometers. At such a volume size, the nanopillar can be effectively modeled as a Stoner-Wohlfarth (SW) particle, and the shape anisotropy scales with the spontaneous magnetization by ~ Ms^2. For almost all ferromagnets, Ms is a strong function of temperature, therefore, the temperature-dependent shape anisotropy is an important factor to be considered in any modeling of the temperature-dependent performance of PSA-STT-MRAMs. In this work, we summarize and discuss various possible temperature-dependent contributions to the thermal stability factor and coercivity of the PSA-STT-MRAMs by modeling and comparing different temperature scaling and parameters. We reveal nontrivial corrections to the thermal stability factor by considering both temperature-dependent shape and interfacial anisotropies. The coercivity, blocking temperature, and electrical switching characteristics that resulted from incorporating such a temperature dependence are also discussed, in conjugation with the nanomagnet dimension and coherence volume.
We study thermally assisted domain wall generation in perpendicular magnetic anisotropy CoFeB trilayer nanowires by the effect of Joule heating. The anomalous Hall effect is utilized to detect magnetization reversal in order to study the domain wall
generation. We observe a statistical distribution in the switching process which is consistent with the thermal activation process. Our results show that the proposed method provides an efficient way for generating domain walls in perpendicular magnetic nanowires at predefined locations.
We investigated the low temperature performance of CoFeB/MgO based perpendicular magnetic tunnel junctions (pMTJs) by characterizing their quasi-static switching voltage, high speed pulse write error rate and endurance down to 9 K. pMTJ devices exhib
ited high magnetoresistance (>120%) and reliable (error rate<10-4) bi-directional switching with 2 to 200 ns voltage pulses. The endurance of the devices at 9 K surpassed that at 300 K by three orders of magnitude under the same write conditions, functioning for more than 10^12 cycles with 10 ns write pulses. The critical switching voltage at 9 K was observed to increase by 33% to 93%, depending on pulse duration, compared to that at 350 K. Ferromagnetic resonance and magnetization measurements on blanket pMTJ film stacks suggest that the increased switching voltage is associated with an increase in effective magnetic anisotropy and magnetization of free layer with decreasing temperature. Our work demonstrates that CoFeB/MgO based pMTJs have great potential to enable cryogenic MRAM and that their low temperature magnetization and effective magnetic anisotropy can be further optimized to lower operating power and improve endurance.
Perpendicularly magnetized films showing small saturation magnetization, $M_mathrm{s}$, are essential for spin-transfer-torque writing type magnetoresistive random access memories, STT-MRAMs. An intermetallic compound, {(Mn-Cr)AlGe} of the Cu$_2$Sb-t
ype crystal structure was investigated, in this study, as a material showing the low $M_mathrm{s}$ ($sim 300$ kA/m) and high-perpendicular magnetic anisotropy, $K_mathrm{u}$. The layer thickness dependence of $K_mathrm{u}$ and effects of Mg-insertion layers at top and bottom (Mn-Cr)AlGe$|$MgO interfaces were studied in film samples fabricated onto thermally oxidized silicon substrates to realize high-$K_mathrm{u}$ in the thickness range of a few nanometer. Optimum Mg-insertion thicknesses were 1.4 and 3.0 nm for the bottom and the top interfaces, respectively, which were relatively thick compared to results in similar insertion effect investigations on magnetic tunnel junctions reported in previous studies. The cross-sectional transmission electron microscope images revealed that the Mg-insertion layers acted as barriers to interdiffusion of Al-atoms as well as oxidization from the MgO layers. The values of $K_mathrm{u}$ were about $7 times 10^5$ and $2 times 10^5$ J/m$^3$ at room temperature for 5 and 3 nm-thick (Mn-Cr)AlGe films, respectively, with the optimum Mg-insertion thicknesses. The $K_mathrm{u}$ at a few nanometer thicknesses is comparable or higher than those reported in perpendicularly magnetized CoFeB films which are conventionally used in MRAMs, while the $M_mathrm{s}$ value is one third or less smaller than those of the CoFeB films. The developed (Mn-Cr)AlGe films are promising from the viewpoint of not only the magnetic properties, but also the compatibility to the silicon process in the film fabrication.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
