اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn ALMA study of the Orion Integral Filament: I. Evidence for narrow fibers in a massive cloud
119
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Abridged. Are all filaments bundles of fibers? To address this question, we have investigated the gas organization within the paradigmatic Integral Shape Filament (ISF). We combined two new ALMA Cycle 3 mosaics with previous IRAM 30m observations to produce a high-dynamic range N$_2$H$^+$(1-0) emission map of the ISF tracing its high-density material and velocity structure down to scales of 0.009 pc. From the analysis of the gas kinematics, we identify a total of 55 dense fibers in the central region of the ISF. Independently of their location, these fibers are characterized by transonic internal motions, lengths of ~0.15 pc, and masses per-unit-length close to those expected in hydrostatic equilibrium. The ISF fibers are spatially organized forming a dense bundle with multiple hub-like associations likely shaped by the local gravitational potential. Within this complex network, the ISF fibers show a compact radial emission profile with a median FWHM of 0.035 pc systematically narrower than the previously proposed universal 0.1 pc filament width. Our ALMA observations reveal complex bundles of fibers in the ISF, suggesting strong similarities between the internal substructure of this massive filament and previously studied lower-mass objects. The fibers show identical dynamic properties in both low- and high-mass regions, and their widespread detection suggests a preferred organizational mechanism of gas in which the physical fiber dimensions (width and length) are self-regulated depending on their intrinsic gas density. Combined with previous works, we identify a systematic increase of the surface density of fibers as a function of the total mass per-unit-length in filamentary clouds. Based on this empirical correlation, we propose a unified star-formation scenario where the observed differences between low- and high-mass clouds emerge naturally from the initial concentration of fibers.
قيم البحث
اقرأ أيضاً
The physical processes behind the transfer of mass from parsec-scale clumps to massive-star-forming cores remain elusive. We investigate the relation between the clump morphology and the mass fraction that ends up in its most massive core (MMC) as a
function of infrared brightness, i.e. a clump evolutionary tracer. Using ALMA 12 m and ACA we surveyed 6 infrared-dark hubs in 2.9mm continuum at $sim$3 resolution. To put our sample into context, we also re-analysed published ALMA data from a sample of 29 high mass-surface density ATLASGAL sources. We characterise the size, mass, morphology, and infrared brightness of the clumps using Herschel and Spitzer data. Within the 6 newly observed hubs, we identify 67 cores, and find that the MMCs have masses between 15-911 $mathrm{M}_{odot}$ within a radius of 0.018-0.156 pc. The MMC of each hub contains 3-24% of the clump mass ($f_mathrm{MMC}$), becoming 5-36% once core masses are normalised to the median core radius. Across the 35 clumps, we find no significant difference in the median $f_mathrm{MMC}$ values of hub and non-hub systems, likely the consequence of a sample bias. However, we find that $f_mathrm{MMC}$ is $sim$7.9 times larger for infrared-dark clumps compared to infrared-bright ones. This factor increases up to $sim$14.5 when comparing our sample of 6 infrared-dark hubs to infrared-bright clumps. We speculate that hub-filament systems efficiently concentrate mass within their MMC early on during its evolution. As clumps evolve, they grow in mass, but such growth does not lead to the formation of more massive MMCs.
We study the fragmentation of the nearest high line-mass filament, the integral shaped filament (ISF, line-mass $sim$ 400 M$_odot$ pc$^{-1}$) in the Orion A molecular cloud. We have observed a 1.6 pc long section of the ISF with the Atacama Large Mil
limetre/submillimeter Array (ALMA) at 3 mm continuum emission, at a resolution of $sim$3 (1 200 AU). We identify from the region 43 dense cores with masses about a solar mass. 60% of the ALMA cores are protostellar and 40% are starless. The nearest neighbour separations of the cores do not show a preferred fragmentation scale; the frequency of short separations increases down to 1 200 AU. We apply a two-point correlation analysis on the dense core separations and show that the ALMA cores are significantly grouped at separations below $sim$17 000 AU and strongly grouped below $sim$6 000 AU. The protostellar and starless cores are grouped differently: only the starless cores group strongly below $sim$6 000 AU. In addition, the spatial distribution of the cores indicates periodic grouping of the cores into groups of $sim$30 000 AU in size, separated by $sim$50 000 AU. The groups coincide with dust column density peaks detected by Herschel. These results show hierarchical, two-mode fragmentation in which the maternal filament periodically fragments into groups of dense cores. Critically, our results indicate that the fragmentation models for lower line-mass filaments ($sim$ 16 M$_odot$ pc$^{-1}$) fail to capture the observed properties of the ISF. We also find that the protostars identified with Spitzer and Herschel in the ISF are grouped at separations below $sim$17 000 AU. In contrast, young stars with disks do not show significant grouping. This suggests that the grouping of dense cores is partially retained over the protostar lifetime, but not over the lifetime of stars with disks.
(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at A
PEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover extended emission. The combined Herschel-ArTeMiS maps provide details on the distribution of dense, cold material, with a high spatial dynamic range, from our 8 resolution (0.016 pc) up to the size of the map ~10-15 deg. By combining Herschel and ArTeMiS data at 160, 250, 350 and 450 micron, we constructed high-resolution temperature and H2 column density maps. We extracted radial profiles from the column density map in several, representative portions of the ISF, that we fitted with Gaussian and Plummer models to derive their intrinsic widths. We also compared the distribution of material traced by ArTeMiS with that seen in the higher density tracer N2H+(1-0) recently observed with the ALMA interferometer. All the radial profiles that we extracted show clear deviation from a Gaussian, with evidence for an inner plateau, previously not seen using Herschel-only data. We measure intrinsic half-power widths in the range 0.06 to 0.11 pc. This is significantly larger than the Gaussian widths measured for fibers seen in N2H+, which probably traces only the dense innermost regions of the large-scale filament. These half-power widths are within a factor of two of the value of 0.1 pc found for a large sample of nearby filaments in various low-mass star-forming regions, which tends to indicate that the physical conditions governing the fragmentation of prestellar cores within transcritical or supercritical filaments are the same over a large range of masses per unit length.
Context. Dense molecular filaments are ubiquituous in the interstellar medium, yet their internal physical conditions and formation mechanism remain debated. Aims. We study the kinematics and physical conditions in the Musca filament and the Chamaele
on-Musca complex to constrain the physics of filament formation. Methods. We produced CO(2-1) isotopologue maps with the APEX telescope that cut through the Musca filament. We further study a NANTEN2 $^{12}$CO(1-0) map of the Musca cloud and the HI emission of the Chamaeleon-Musca complex. Results. The Musca cloud contains multiple velocity components. Radiative transfer modelling of the CO emission indicates that the Musca filament consists of a cold ($sim$10 K), dense (n$_{H_2}sim$10$^4$ cm$^{-3}$) crest, which is best described with a cylindrical geometry. Connected to the crest, a separate gas component at T$sim$15 K and n$_{H_2}sim$10$^3$ cm$^{-3}$ is found, the so-called strands. The filament crest has a transverse velocity gradient that is linked to the kinematics of the nearby ambient cloud. Studying the large scale kinematics, we find coherence of the asymmetric kinematics from the 50 pc HI cloud down to the Musca filament. We also report a strong [C$^{18}$O]/[$^{13}$CO] abundance drop by an order of magnitude from the filament crest to the strands over a distance $<$ 0.2 pc in a weak far-ultraviolet (FUV) field. Conclusions. The dense Musca filament crest is a long-lived (several crossing times), dynamic structure that can form stars in the near future because of continuous mass accretion. This mass accretion appears to be triggered by a HI cloud-cloud collision, which bends the magnetic field around dense filaments. This bending of the magnetic field is then responsible for the observed asymmetric accretion scenario of the Musca filament, which is, for instance, seen as a V-shape in the position-velocity (PV) diagram.
A recently discovered filament of polarized starlight that traces a coherent magnetic field is shown to have several properties that are consistent with an origin in the outer heliosheath of the heliosphere: (1) The magnetic field that provides the b
est fit to the polarization position angles is directed within 6.7+-11 degrees of the observed upwind direction of the flow of interstellar neutral helium gas through the heliosphere. (2) The magnetic field is ordered; the component of the variation of the polarization position angles that can be attributed to magnetic turbulence is small. (3) The axis of the elongated filament can be approximated by a line that defines an angle of 80+/-14 degrees with the plane that is formed by the interstellar magnetic field vector and the vector of the inflowing neutral gas (the BV plane). We propose that this polarization feature arises from aligned interstellar dust grains in the outer heliosheath where the interstellar plasma and magnetic field are deflected around the heliosphere. The proposed outer heliosheath location of the polarizing grains requires confirmation by modeling grain-propagation through three-dimensional MHD heliosphere models that simultaneously calculate torques on asymmetric dust grains interacting with the heliosphere.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
