اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOn the fragmentation of filaments in a molecular cloud simulation
226
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The fragmentation of filaments in molecular clouds has attracted a lot of attention as there seems to be a relation between the evolution of filaments and star formation. The study of the fragmentation process has been motivated by simple analytical models. However, only a few comprehensive studies have analysed the evolution of filaments using numerical simulations where the filaments form self-consistently as part of molecular clouds. We address the early evolution of pc-scale filaments that form within individual clouds. We focus on three questions: How do the line masses of filaments evolve? How and when do the filaments fragment? How does the fragmentation relate to the line masses of the filaments? We examine three simulated molecular clouds formed in kpc-scale numerical simulations performed with the FLASH code. We compare the properties of the identified filaments with the predictions of analytic filament stability models. The line masses and mass fraction enclosed in the identified filaments increase continuously after the onset of self-gravity. The first fragments appear early when the line masses lie well below the critical line mass of Ostrikers hydrostatic equilibrium solution. The average line masses of filaments identified in 3D density cubes increases far more quickly than those identified in 2D column density maps. Our results suggest that hydrostatic or dynamic compression from the surrounding cloud has a significant impact on the early dynamical evolution of filaments. A simple model of an isolated, isothermal cylinder may not provide a good approach for fragmentation analysis. Caution must be exercised in interpreting distributions of properties of filaments identified in column density maps, especially in the case of low-mass filaments. Comparing or combining results from studies that use different filament finding techniques is strongly discouraged.
قيم البحث
اقرأ أيضاً
Filaments in Herschel molecular cloud images are found to exhibit a characteristic width. This finding is in tension with spatial power spectra of the data, which show no indication of this characteristic scale. We demonstrate that this discrepancy i
s a result of the methodology adopted for measuring filament widths. First, we perform the previously used analysis technique on artificial scale-free data, and obtain a peaked width distribution of filament-like structures. Next, we repeat the analysis on three Herschel maps and reproduce the narrow distribution of widths found in previous studies $-$ when considering the average width of each filament. However, the distribution of widths measured at all points along a filament spine is broader than the distribution of mean filament widths, indicating that the narrow spread (interpreted as a characteristic width) results from averaging. Furthermore, the width is found to vary significantly from one end of a filament to the other. Therefore, the previously identified peak at 0.1 pc cannot be understood as representing the typical width of filaments. We find an alternative explanation by modelling the observed width distribution as a truncated power-law distribution, sampled with uncertainties. The position of the peak is connected to the lower truncation scale and is likely set by the choice of parameters used in measuring filament widths. We conclude that a characteristic width of filaments is not supported by the available data.
We have studied the filaments extracted from the column density maps of the nearby Lupus 1, 3, and 4 molecular clouds, derived from photometric maps observed with the Herschel satellite. Filaments in the Lupus clouds have quite low column densities,
with a median value of $sim$1.5$times$10$^{21}$ cm$^{-2}$ and most have masses per unit length lower than the maximum critical value for radial gravitational collapse. Indeed, no evidence of filament contraction has been seen in the gas kinematics. We find that some filaments, that on average are thermally subcritical, contain dense cores that may eventually form stars. This is an indication that in the low column density regime, the critical condition for the formation of stars may be reached only locally and this condition is not a global property of the filament. Finally, in Lupus we find multiple observational evidences of the key role that the magnetic field plays in forming filaments, and determining their confinement and dynamical evolution.
We report on the filaments that develop self-consistently in a new numerical simulation of cloud formation by colliding flows. As in previous studies, the forming cloud begins to undergo gravitational collapse because it rapidly acquires a mass much
larger than the average Jeans mass. Thus, the collapse soon becomes nearly pressureless, proceeding along its shortest dimension first. This naturally produces filaments in the cloud, and clumps within the filaments. The filaments are not in equilibrium at any time, but instead are long-lived flow features, through which the gas flows from the cloud to the clumps. The filaments are long-lived because they accrete from their environment while simultaneously accreting onto the clumps within them; they are essentially the locus where the flow changes from accreting in two dimensions to accreting in one dimension. Moreover, the clumps also exhibit a hierarchical nature: the gas in a filament flows onto a main, central clump, but other, smaller-scale clumps form along the infalling gas. Correspondingly, the velocity along the filament exhibits a hierarchy of jumps at the locations of the clumps. Two prominent filaments in the simulation have lengths ~15 pc, and masses ~600 Msun above density n ~ 10^3 cm-3 (~2x10^3 Msun at n > 50 cm-3). The density profile exhibits a central flattened core of size ~0.3 pc and an envelope that decays as r^-2.5, in reasonable agreement with observations. Accretion onto the filament reaches a maximum linear density rate of ~30 Msun Myr^-1 pc^-1.
We study the fragmentation of the nearest high line-mass filament, the integral shaped filament (ISF, line-mass $sim$ 400 M$_odot$ pc$^{-1}$) in the Orion A molecular cloud. We have observed a 1.6 pc long section of the ISF with the Atacama Large Mil
limetre/submillimeter Array (ALMA) at 3 mm continuum emission, at a resolution of $sim$3 (1 200 AU). We identify from the region 43 dense cores with masses about a solar mass. 60% of the ALMA cores are protostellar and 40% are starless. The nearest neighbour separations of the cores do not show a preferred fragmentation scale; the frequency of short separations increases down to 1 200 AU. We apply a two-point correlation analysis on the dense core separations and show that the ALMA cores are significantly grouped at separations below $sim$17 000 AU and strongly grouped below $sim$6 000 AU. The protostellar and starless cores are grouped differently: only the starless cores group strongly below $sim$6 000 AU. In addition, the spatial distribution of the cores indicates periodic grouping of the cores into groups of $sim$30 000 AU in size, separated by $sim$50 000 AU. The groups coincide with dust column density peaks detected by Herschel. These results show hierarchical, two-mode fragmentation in which the maternal filament periodically fragments into groups of dense cores. Critically, our results indicate that the fragmentation models for lower line-mass filaments ($sim$ 16 M$_odot$ pc$^{-1}$) fail to capture the observed properties of the ISF. We also find that the protostars identified with Spitzer and Herschel in the ISF are grouped at separations below $sim$17 000 AU. In contrast, young stars with disks do not show significant grouping. This suggests that the grouping of dense cores is partially retained over the protostar lifetime, but not over the lifetime of stars with disks.
Star formation is primarily controlled by the interplay between gravity, turbulence, and magnetic fields. However, the turbulence and magnetic fields in molecular clouds near the Galactic Center may differ substantially from spiral-arm clouds. Here w
e determine the physical parameters of the central molecular zone (CMZ) cloud G0.253+0.016, its turbulence, magnetic field and filamentary structure. Using column-density maps based on dust-continuum emission observations with ALMA+Herschel, we identify filaments and show that at least one dense core is located along them. We measure the filament width W_fil=0.17$pm$0.08pc and the sonic scale {lambda}_sonic=0.15$pm$0.11pc of the turbulence, and find W_fil~{lambda}_sonic. A strong velocity gradient is seen in the HNCO intensity-weighted velocity maps obtained with ALMA+Mopra, which is likely caused by large-scale shearing of G0.253+0.016, producing a wide double-peaked velocity PDF. After subtracting the gradient to isolate the turbulent motions, we find a nearly Gaussian velocity PDF typical for turbulence. We measure the total and turbulent velocity dispersion, 8.8$pm$0.2km/s and 3.9$pm$0.1km/s, respectively. Using magnetohydrodynamical simulations, we find that G0.253+0.016s turbulent magnetic field B_turb=130$pm$50$mu$G is only ~1/10 of the ordered field component. Combining these measurements, we reconstruct the dominant turbulence driving mode in G0.253+0.016 and find a driving parameter b=0.22$pm$0.12, indicating solenoidal (divergence-free) driving. We compare this to spiral-arm clouds, which typically have a significant compressive (curl-free) driving component (b>0.4). Motivated by previous reports of strong shearing motions in the CMZ, we speculate that shear causes the solenoidal driving in G0.253+0.016 and show that this reduces the star formation rate (SFR) by a factor of 6.9 compared to typical nearby clouds.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
