ترغب بنشر مسار تعليمي؟ اضغط هنا

Error propagation dynamics of velocimetry-based pressure field calculations (2): on the error profile

76   0   0.0 ( 0 )
 نشر من قبل Zhao Pan
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

A recent study investigated the propagation of error in a Velocimetry-based Pressure (V-Pressure) field reconstruction problem by directly analyzing the properties of the pressure Poisson equation (Pan et al., 2016). In the present work, we extend these results by quantifying the effect of the error profile in the data field (shape/structure of the error in space) on the resultant error in the reconstructed pressure field. We first calculate the mode of the error in the data that maximizes error in the pressure field, which is the most dangerous error (called the worst error in the present work). This calculation of the worst error is equivalent to finding the principle mode of, for example, an Euler-Bernoulli beam problem in one-dimension and the Kirchhoff-Love plate in two-dimensions, thus connecting the V-Pressure problem from experimental fluid mechanics to buckling elastic bodies from elastic mechanics. Taking advantage of this analogy, we then analyze how the error profile (e.g., spatial frequency of the error and the location of the most concentrated error) in the data field coupled with fundamental features of the flow domain (i.e., size, shape, and dimension of the domain, and the configuration of boundary conditions) significantly affects the error propagation from data to the reconstructed pressure. Our analytical results lend to practical applications in two ways. First, minimization of error propagation can be achieved by avoiding low-frequency error profiles in data similar to the worst case scenarios and error concentrated at sensitive locations. Second, small amounts of the error in the data, if the error profile is similar to the worst error case, can cause significant error in the reconstructed pressure field; such a synthetic error can be used to benchmark V-Pressure algorithms.



قيم البحث

اقرأ أيضاً

An analytical framework for the propagation of velocity errors into PIV-based pressure calculation is extended. Based on this framework, the optimal spatial resolution and the corresponding minimum field-wide error level in the calculated pressure fi eld are determined. This minimum error is viewed as the smallest resolvable pressure. We find that the optimal spatial resolution is a function of the flow features, geometry of the flow domain, and the type of the boundary conditions, in addition to the error in the PIV experiments, making a general statement about pressure sensitivity difficult. The minimum resolvable pressure depends on competing effects from the experimental error due to PIV and the truncation error from the numerical solver. This means that PIV experiments motivated by pressure measurements must be carefully designed so that the optimal resolution (or close to the optimal resolution) is used. Flows (Re=$1.27 times 10^4$ and $5times 10^4$) with exact solutions are used as examples to validate the theoretical predictions of the optimal spatial resolutions and pressure sensitivity. The numerical experimental results agree well with the rigorous predictions. Estimates of the relevant constants in the analysis are also provided.
This article describes two independent developments aimed at improving the Particle Tracking Method for measurements of flow or particle velocities. First, a stereoscopic multicamera calibration method that does not require any optical model is descr ibed and evaluated. We show that this new calibration method gives better results than the most commonly-used technique, based on the Tsai camera/optics model. Additionally, the methods uses a simple interpolant to compute the transformation matrix and it is trivial to apply for any experimental fluid dynamics visualization set up. The second contribution proposes a solution to remove noise from Eulerian measurements of velocity statistics obtained from Particle Tracking velocimetry, without the need of filtering and/or windowing. The novel method presented here is based on recomputing particle displacement measurements from two consecutive frames for multiple different time-step values between frames. We show the successful application of this new technique to recover the second order velocity structure function of the flow. Increased accuracy is demonstrated by comparing the dissipation rate of turbulent kinetic energy measured from the second order structure function against previously validated measurements. These two techniques for improvement of experimental fluid/particle velocity measurements can be combined to provide high accuracy 3D particle and/or flow velocity statistics and derived variables needed to characterize a turbulent flow.
Wettability is a pore-scale property that has an important impact on capillarity, residual trapping, and hysteresis in porous media systems. In many applications, the wettability of the rock surface is assumed to be constant in time and uniform in sp ace. However, many fluids are capable of altering the wettability of rock surfaces permanently and dynamically in time. Experiments have shown wettability alteration can significantly decrease capillarity in CO$_2$ storage applications. For these systems, the standard capillary-pressure model that assumes static wettability is insufficient to describe the physics. In this paper, we develop a new dynamic capillary-pressure model that takes into account changes in wettability at the pore-level by adding a dynamic term to the standard capillary pressure function. We simulate the dynamic system using a bundle-of-tubes (BoT) approach, where a mechanistic model for time-dependent contact angle change is introduced at the pore scale. The resulting capillary pressure curves are then used to quantify the dynamic component of the capillary pressure function. This study shows the importance of time-dependent wettability for determining capillary pressure over timescales of months to years. The impact of wettability has implications for experimental methodology as well as macroscale simulation of wettability-altering fluids.
The aim of this note is to examine the efficacy of a recently developed approach to the recovery of nonlinear water waves from pressure measurements at the seabed, by applying it to the celebrated extreme Stokes wave.
In the current work the reconstruction of the far-field region of the turbulent axi-symmetric jet is performed in order to investigate the modal turbulence kinetic energy production contributions. The reconstruction of the field statistics is based o n a semi-analytical Lumley Decomposition (LD) of the PIV sampled field using stretched amplitude decaying Fourier modes (SADFM), derived in Hodv{z}ic et al. 2019, along the streamwise coordinate. It is shown that, a wide range of modes obtain a significant amount of energy directly from the mean flow, and are therefore not exclusively dependent on a Richardson-like energy cascade even in the $kappa$-range in which the energy spectra exhibit the $-5/3$-slope. It is observed that the $-7/3$-range in the cross-spectra is fully reconstructed using a single mode in regions of high mean shear, and that shear-stresses are nearly fully reconstructed using the first two modes. These results indicate that most of the energy production related to shear-stresses is related to the first LD mode.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا