ترغب بنشر مسار تعليمي؟ اضغط هنا

Distributed feedback terahertz frequency quantum cascade lasers with dual periodicity gratings

148   0   0.0 ( 0 )
 نشر من قبل Simone Zanotto
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, was designed through use of an appropriate wavevector scattering model. Single mode THz emission at angles tuned by design between 0{deg} and 50{deg} was realized, leading to an original phase-matching approach, lithographically independent, for highly collimated THz QCLs.



قيم البحث

اقرأ أيضاً

Terahertz quantum cascade laser sources based on intra-cavity difference frequency generation from mid-IR devices are an important asset for applications in rotational molecular spectroscopy and sensing, beingthe only electrically pumped device able to operate in the 0.6-6 THz range without the need of bulky andexpensive liquid helium cooling. Here we present comb operation obtained by intra-cavity mixing of adistributed feedback laser at {lambda} = 6.5 {mu}m and a Fabry-Perot device at around {lambda} = 6.9 {mu}m. The resultingultra-broadband THz emission extends from 1.8 to 3.3 THz, with a total output power of 8 {mu}W at 78K.The THz emission has been characterized by multi-heterodyne detection with a primary frequencystandard referenced THz comb, obtained by optical rectification of near infrared pulses. The down-converted beatnotes, simultaneously acquired, confirm an equally spaced THz emission down to 1 MHzaccuracy. In the next future this setup can be used for Fourier transform based evaluation of the phaserelation among the emitted THz modes, paving the way to room-temperature, compact and field-deployable metrological grade THz frequency combs.
We report a homogeneous quantum cascade laser (QCL) emitting at Terahertz (THz) frequencies, with a total spectral emission of about 0.6 THz centered around 3.3 THz, a current density dynamic range of Jdr=1.53, and a continuous wave output power of 7 mW. The analysis of the intermode beatnote unveils that the devised laser operates as optical frequency comb (FC) synthesizer over the whole laser operational regime, with up to 36 optically active laser modes delivering ~ 200 uW of optical power per comb tooth, a power level unreached so far in any THz QCL FC. A stable and narrow single beatnote, reaching a minimum linewidth of 500 Hz, is observed over a current density range of 240 A/cm2, and even across the negative differential resistance region. We further prove that the QCL frequency comb can be injection locked with moderate RF power at the intermode beatnote frequency, covering a locking range of 1.2 MHz. The demonstration of stable FC operation, in a QCL, over the full current density dynamic range, and without any external dispersion compensation mechanism, makes our proposed homogenous THz QCL an ideal tool for metrological application requiring mode-hop electrical tunability and a tight control of the frequency and phase jitter.
119 - Marco Ravaro 2013
We demonstrate a coherent imaging system based on a terahertz (THz) frequency quantum cascade laser (QCL) phase-locked to a near-infrared fs-laser comb. The phase locking enables coherent electro-optic sampling of the continuous-wave radiation emitte d by the QCL through the generation of a heterodyne beat-note signal. We use this beat-note signal to demonstrate raster scan coherent imaging using a QCL emitting at 2.5 THz. At this frequency the detection noise floor of our system is of 3 pW/Hz and the long-term phase stability is <3 degrees/h, limited by the mechanical stability of the apparatus.
We study laser generation in 1D distributed feedback lasers with amplifying and lossy layers. We show that when the lasing frequency differs from the transition frequencies of the amplifying medium, loss induced lasing may occur due to the broadening of the resonator mode with increasing loss in the absorbing layers. This broadening leads to a shift in the lasing frequency towards the transition frequency. As a result, the cavity mode interaction with the amplifying medium is enhanced, and the lasing threshold is lowered.
We report on a new design of terahertz quantum cascade laser based on a single, potential-inserted quantum well active region. The quantum well properties are engineered through single monolayer InAs inserts. The modeling is based on atomistic, spds* tight-binding calculations, and performances are compared to that of the classical three-well design. We obtain a 100% increase of the oscillator strength per unit length, while maintaining a high, nearly temperature-independent contrast between phonon-induced relaxation times of the upper and lower lasing states. The improved performances are expected to allow THz lasing at room temperature.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا