اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOn the Role of Elastic Strain on Electrocatalysis of Oxygen Reduction Reaction on Pt
161
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The effect of elastic strain on catalytic activity of platinum (Pt) towards oxygen reduction reaction (ORR) is investigated through de-alloyed Pt-Cu thin films; stress evolution in the de-alloyed layer and the mass of the Cu removed are measured in real-time during electrochemical de-alloying of (111)-textured thin-film PtCu (1:1, atom %) electrodes. In situ stress measurements are made using the cantilever-deflection method and nano-gravimetric measurements are made using an electrochemical quartz crystal nanobalance. Upon de-alloying via successive voltammetric sweeps between -0.05 and 1.15 V vs. standard hydrogen electrode, compressive stress develops in the de-alloyed Pt layer at the surface of thin-film PtCu electrodes. The de-alloyed films also exhibit enhanced catalytic activity towards ORR compared to polycrystalline Pt. In situ nanogravimetric measurements reveal that the mass of de-alloyed Cu is approximately 210 +/- 46 ng/cm2, which corresponds to a de-alloyed layer thickness of 1.2 +/- 0.3 monolayers or 0.16 +/- 0.04 nm. The average biaxial stress in the de-alloyed layer is estimated to be 4.95 +/- 1.3 GPa, which corresponds to an elastic strain of 1.47 +/- 0.4%. In addition, density functional theory calculations have been carried out on biaxially strained Pt (111) surface to characterize the effect of strain on its ORR activity; the predicted shift in the limiting potentials due to elastic strain is found to be in good agreement with the experimental shift in the cyclic voltammograms for the dealloyed PtCu thin film electrodes.
قيم البحث
اقرأ أيضاً
Oxygen vacancies in transition metal oxides facilitate catalysis critical for energy storage and generation. However, it has proven elusive to promote vacancies at the lower temperatures required for operation in devices such as metal-air batteries a
nd portable fuel cells. Here, we use thin films of the perovskite-based strontium cobaltite (SrCoOx) to show that epitaxial strain is a powerful tool towards manipulating the oxygen content under conditions consistent with the oxygen evolution reaction, yielding increasingly oxygen deficient states in an environment where the cobaltite would normally be fully oxidized. The additional oxygen vacancies created through tensile strain enhance the cobaltite catalytic activity towards this important reaction by over an order of magnitude, equaling that of precious metal catalysts, including IrO2. Our findings demonstrate that strain in these oxides can dictate oxygen stoichiometry independent of ambient conditions, allowing unprecedented control over oxygen vacancies essential in catalysis near room temperature.
Fast oxygen transport materials are necessary for a range of technologies, including efficient and cost-effective solid oxide fuel cells, gas separation membranes, oxygen sensors, chemical looping devices, and memristors. Strain is often proposed as
a method to enhance the performance of oxygen transport materials, but the magnitude of its effect and its underlying mechanisms are not well-understood, particularly in the widely-used perovskite-structured oxygen conductors. This work reports on an ab initio prediction of strain effects on migration energetics for nine perovskite systems of the form LaBO3, where B = [Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Ga]. Biaxial strain, as might be easily produced in epitaxial systems, is predicted to lead to approximately linear changes in migration energy. We find that tensile biaxial strain reduces the oxygen vacancy migration barrier across the systems studied by an average of 66 meV per percent strain for a single selected hop, with a low of 36 and a high of 89 meV decrease in migration barrier per percent strain across all systems. The estimated range for the change in migration barrier within each system is approximately 25 meV per percent strain when considering all hops. These results suggest that strain can significantly impact transport in these materials, e.g., a 2% tensile strain can increase the diffusion coefficient by about three orders of magnitude at 300 K (one order of magnitude at 500 {deg}C or 773 K) for one of the most strain-responsive materials calculated here (LaCrO3). We show that a simple elasticity model, which assumes only dilative or compressive strain in a cubic environment and a fixed migration volume, can qualitatively but not quantitatively model the strain dependence of the migration energy, suggesting that factors not captured by continuum elasticity play a significant role in the strain response.
Oxygen vacancy formation energy is an important quantity for enabling fast oxygen diffusion and oxygen catalysis in technologies like solid oxide fuel cells. Both previous literature in various systems and our calculations in LaMnO3, La0.75Sr0.25MnO3
, LaFeO3, and La0.75Sr0.25FeO3, show mixed results for the direction and magnitude of the change in vacancy formation energy with strain. This paper develops a model to make sense of the different trend shapes in vacancy formation energy versus strain. We model strain effects using a set of consistent ab initio calculations, and demonstrate that our calculated results may be simply explained in terms of vacancy formation volume and changes in elastic constants between the bulk and defected states. A positive vacancy formation volume contributes to decreased vacancy formation energy under tensile strain, and an increase in elastic constants contributes to increases in vacancy formation energy with compressive and tensile strains, and vice versa. The vacancy formation volume dominates the linear portion of the vacancy formation energy strain response, while its curvature is governed by the vacancy-induced change in elastic constants. We show results sensitive to B-site cation, A-site doping, tilt system, and vacancy placement, which contributions may be averaged under thermally averaged conditions. In general, vacancy formation energies for most systems calculated here decreased with tensile strain, with about a 30-100 meV/% strain decrease with biaxial strain for those systems which showed a decrease in vacancy formation energy. Experimental verification is necessary to confirm the model outside of calculation.
Understanding the role of elastic strain in modifying catalytic reaction rates is crucial for catalyst design, but experimentally, this effect is often coupled with a ligand effect. To isolate the strain effect, we have investigated the influence of
externally applied elastic strain on the catalytic activity of metal films towards the hydrogen evolution reaction (HER). We show that elastic strain tunes the catalytic activity in a controlled and predictable way. Both theory and experiment show strain controls reactivity in a controlled manner consistent with the qualitative predictions of the HER volcano plot and the d-band theory: Ni and Pt activity were accelerated by compression, while Cu activity was accelerated by tension. By isolating the elastic strain effect from the ligand effect, this study provides a greater insight into the role of elastic strain in controlling electrocatalytic activity.
We investigated the effects of paramagnetic (PM) fluctuations on the thermochemistry of the MnO(100) surface in the oxygen evolution reaction (OER) using the noncollinear magnetic sampling method textit{plus} $U$ (NCMSM$+U$). Various physical propert
ies, such as the electronic structure, free energy, and charge occupation, of the MnO (100) surface in the PM state with several OER intermediates, were reckoned and compared to those in the antiferromagnetic (AFM) state. We found that PM fluctuation enhances charge transfer from a surface Mn ion to each of the intermediates and strengthens the chemical bond between them, while not altering the overall features, such as the rate determining step and resting state, in reaction pathways. The enhanced charge transfer can be attributed to the delocalized nature of valence bands observed in the PM surface. In addition, it was observed that chemical-bond enhancement depends on the intermediates, resulting in significant deviations in reaction energy barriers. Our study suggests that PM fluctuations play a significant role in the thermochemistry of chemical reactions occurring on correlated oxide surfaces.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
