اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدControl of the chemiluminescence spectrum with porous Bragg mirrors
327
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Tunable, battery free light emission is demonstrated in a solid state device that is compatible with lab on a chip technology and easily fabricated via solution processing techniques. A porous one dimensional (1D) photonic crystal (also called Bragg stack or mirror) is infiltrated by chemiluminescence rubrene-based reagents. The Bragg mirror has been designed to have the photonic band gap overlapping with the emission spectrum of rubrene. The chemiluminescence reaction occurs in the intrapores of the photonic crystal and the emission spectrum of the dye is modulated according to the photonic band gap position. This is a compact, powerless emitting source that can be exploited in disposable photonic chip for sensing and point of care applications.
قيم البحث
اقرأ أيضاً
A common way of speeding up powder diffraction measurements is the use of one or two dimensional detectors. This usually goes along with worse resolution and asymmetric peak profiles. In this work the influence of a straight linear detector on the re
solution function in the Bragg-Brentano focusing geometry is discussed. Due to the straight nature of most modern detectors geometrical defocusing occurs which heavily influences the line shape of diffraction lines at low angles. An easy approach to limit the resolution degrading effects is presented. The presented algorithm selects an adaptive range of channels of the linear detector at low angles, resulting in increased resolution. At higher angles still the whole linear detector is used and the data collection remains fast. Using this algorithm a well-behaved resolution function is obtained in the full angular range, whereas using the full linear detector the resolution function varies within one pattern which hinders line shape and Rietveld analysis.
Morphological measures are introduced to probe the complex procedure of shock wave reaction on porous material. They characterize the geometry and topology of the pixelized map of a state variable like the temperature. Relevance of them to thermodyna
mical properties of material is revealed and various experimental conditions are simulated. Numerical results indicate that, the shock wave reaction results in a complicated sequence of compressions and rarefactions in porous material. The increasing rate of the total fractional white area $A$ roughly gives the velocity $D$ of a compressive-wave-series. When a velocity $D$ is mentioned, the corresponding threshold contour-level of the state variable, like the temperature, should also be stated. When the threshold contour-level increases, $D$ becomes smaller. The area $A$ increases parabolically with time $t$ during the initial period. The $A(t)$ curve goes back to be linear in the following three cases: (i) when the porosity $delta$ approaches 1, (ii) when the initial shock becomes stronger, (iii) when the contour-level approaches the minimum value of the state variable. The area with high-temperature may continue to increase even after the early compressive-waves have arrived at the downstream free surface and some rarefactive-waves have come back into the target body. In the case of energetic material ... (see the full text)
Core optics components for high precision measurements are made of stable materials, having small optical and mechanical dissipation. The natural choice in many cases is glass, in particular fused silica. Glass is a solid amorphous state of material
that couldnt become a crystal due to high viscosity. However thermodynamically or externally activated stimulated local processes of spontaneous crystallization (known as devitrification) are still possible. Being random, these processes can produce an additional noise, and influence the performance of such experiments as laser gravitational wave detection.
By means of ab initio calculations we investigate the possibility of existence of a boron nitride (BN) porous two-dimensional nanosheet which is geometrically similar to the carbon allotrope known as biphenylene carbon. The proposed structure, which
we called Inorganic Graphenylene (IGP), is formed spontaneously after selective dehydrogenation of the porous Boron Nitride (BN) structure proposed by Ding et al. We study the structural and electronic properties of both porous BN and IGP and it is shown that, by selective substitution of B and N atoms with carbon atoms in these structures, the band gap can be significantly reduced, changing their behavior from insulators to semiconductors, thus opening the possibility of band gap engineering for this class of two-dimensional materials.
There are several models for the effective thermal conductivity of two-phase composite materials in terms of the conductivity of the solid and the disperse material. In this paper, we generalise three models of Maxwell type (namely, the classical Max
well model and two generalisations of it obtained from effective medium theory and differential effective medium theory) so that the resulting effective thermal conductivity accounts for radiative heat transfer within gas voids. In the high-temperature regime, radiative transfer within voids strongly influences the thermal conductivity of the bulk material. Indeed, the utility of these models over classical Maxwell-type models is seen in the high-temperature regime, where they predict that the effective thermal conductivity of the composite material levels off to a constant value (as a function of temperature) at very high temperatures, provided that the material is not too porous, in agreement with experiments. This behaviour is in contrast to models which neglect radiative transfer within the pores, or lumped parameter models, as such models do not resolve the radiative transfer independently from other physical phenomena. Our results may be of particular use for industrial and scientific applications involving heat transfer within porous composite materials taking place in the high-temperature regime.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
