اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThermalization properties at mK temperatures of a nanoscale optomechanical resonator with acoustic-bandgap shield
47
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and damping of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mechanical resonance is found to couple at a rate of 400Hz (Q=9x10^6) to a thermal bath of temperature 270mK. These measurements indicate that silicon optomechanical crystals cooled to millikelvin temperatures should be suitable for a variety of experiments involving coherent coupling between photons and phonons at the single quanta level.
قيم البحث
اقرأ أيضاً
Photothermal heating represents a major constraint that limits the performance of many nanoscale optoelectronic and optomechanical devices including nanolasers, quantum optomechanical resonators, and integrated photonic circuits. Although radiation-p
ressure damping has been reported to cool an individual vibrational mode of an optomechanical resonator to its quantum ground state, to date the internal material temperature within an optomechanical resonator has not been reported to cool via laser excitation. Here we demonstrate the direct laser refrigeration of a semiconductor optomechanical resonator >20K below room temperature based on the emission of upconverted, anti-Stokes photoluminescence of trivalent ytterbium ions doped within a yttrium-lithium-fluoride (YLF) host crystal. Optically-refrigerating the lattice of a dielectric resonator has the potential to impact several fields including scanning probe microscopy, the sensing of weak forces, the measurement of atomic masses, and the development of radiation-balanced solid-state lasers. In addition, optically refrigerated resonators may be used in the future as a promising starting point to perform motional cooling for exploration of quantum effects at mesoscopic length scales,temperature control within integrated photonic devices, and solid-state laser refrigeration of quantum materials
Using pulsed optical excitation and read-out along with single phonon counting techniques, we measure the transient back-action, heating, and damping dynamics of a nanoscale silicon optomechanical crystal cavity mounted in a dilution refrigerator at
a base temperature of 11mK. In addition to observing a slow (~740ns) turn-on time for the optical-absorption-induced hot phonon bath, we measure for the 5.6GHz `breathing acoustic mode of the cavity an initial phonon occupancy as low as 0.021 +- 0.007 (mode temperature = 70mK) and an intrinsic mechanical decay rate of 328 +- 14 Hz (mechanical Q-factor = 1.7x10^7). These measurements demonstrate the feasibility of using short pulsed measurements for a variety of quantum optomechanical applications despite the presence of steady-state optical heating.
Strain engineering is a powerful tool for tuning physical properties of 2D materials, including monolayer transition metal dichalcogenides (TMD) -- direct bandgap semiconductors with strong excitonic response. Here, we demonstrate an approach for loc
al characterization of strain-induced modification of excitonic photoluminescence in TMD-based materials. We reversibly stress a monolayer of MoSe$_2$ with an AFM tip and perform spatio-spectral mapping of the excitonic photoluminescence in the vicinity of the indentation point. To fully reproduce the experimental data, we introduce the linear dependence of the exciton energy and corresponding photoluminescence intensity on the induced strain. Careful account for the optical resolution allows extracting these quantities with good agreement with the previous measurements, which involved macroscopic sample deformation. Our approach is a powerful tool for the study of local optomechanical properties of 2D direct bandgap semiconductors with strong excitonic response.
The generalized amplitude damping (GAD) quantum channel implements the interaction between a qubit and an environment with arbitrary temperature and arbitrary interaction time. Here, we implement a photonic version of the GAD for the case of infinite
interaction time (full thermalization). We also show that this quantum channel works as a thermal bath with controlled temperature.
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the
motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling between cavity modes results from mechanically-induced avoided crossings in the cavitys spectrum. Near the avoided crossings we find that the optical spring shows distinct features that arise from the interaction between cavity modes. Precisely at an avoided crossing, we show that the particular form of the optical spring provides a classical analog of a quantum-nondemolition measurement of the intracavity photon number. The mechanical oscillators Brownian motion, an important source of noise in these measurements, is minimized by operating the device at cryogenic temperature (500 mK).
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
