ترغب بنشر مسار تعليمي؟ اضغط هنا

The Effect of Block-wise Feedback on the Throughput-Delay Trade-off in Streaming

407   0   0.0 ( 0 )
 نشر من قبل Gauri Joshi
 تاريخ النشر 2014
  مجال البحث الهندسة المعلوماتية
والبحث باللغة English




اسأل ChatGPT حول البحث

Unlike traditional file transfer where only total delay matters, streaming applications impose delay constraints on each packet and require them to be in order. To achieve fast in-order packet decoding, we have to compromise on the throughput. We study this trade-off between throughput and in-order decoding delay, and in particular how it is affected by the frequency of block-wise feedback to the source. When there is immediate feedback, we can achieve the optimal throughput and delay simultaneously. But as the feedback delay increases, we have to compromise on at least one of these metrics. We present a spectrum of coding schemes that span different points on the throughput-delay trade-off. Depending upon the delay-sensitivity and bandwidth limitations of the application, one can choose an appropriate operating point on this trade-off.



قيم البحث

اقرأ أيضاً

Unlike traditional file transfer where only total delay matters, streaming applications impose delay constraints on each packet and require them to be in order. To achieve fast in-order packet decoding, we have to compromise on the throughput. We stu dy this trade-off between throughput and smoothness in packet decoding. We first consider a point-to-point streaming and analyze how the trade-off is affected by the frequency of block-wise feedback, whereby the source receives full channel state feedback at periodic intervals. We show that frequent feedback can drastically improve the throughput-smoothness trade-off. Then we consider the problem of multicasting a packet stream to two users. For both point-to-point and multicast streaming, we propose a spectrum of coding schemes that span different throughput-smoothness tradeoffs. One can choose an appropriate coding scheme from these, depending upon the delay-sensitivity and bandwidth limitations of the application. This work introduces a novel style of analysis using renewal processes and Markov chains to analyze coding schemes.
This paper investigates delay-distortion-power trade offs in transmission of quasi-stationary sources over block fading channels by studying encoder and decoder buffering techniques to smooth out the source and channel variations. Four source and cha nnel coding schemes that consider buffer and power constraints are presented to minimize the reconstructed source distortion. The first one is a high performance scheme, which benefits from optimized source and channel rate adaptation. In the second scheme, the channel coding rate is fixed and optimized along with transmission power with respect to channel and source variations; hence this scheme enjoys simplicity of implementation. The two last schemes have fixed transmission power with optimized adaptive or fixed channel coding rate. For all the proposed schemes, closed form solutions for mean distortion, optimized rate and power are provided and in the high SNR regime, the mean distortion exponent and the asymptotic mean power gains are derived. The proposed schemes with buffering exploit the diversity due to source and channel variations. Specifically, when the buffer size is limited, fixed channel rate adaptive power scheme outperforms an adaptive rate fixed power scheme. Furthermore, analytical and numerical results demonstrate that with limited buffer size, the system performance in terms of reconstructed signal SNR saturates as transmission power is increased, suggesting that appropriate buffer size selection is important to achieve a desired reconstruction quality.
Gradient coding allows a master node to derive the aggregate of the partial gradients, calculated by some worker nodes over the local data sets, with minimum communication cost, and in the presence of stragglers. In this paper, for gradient coding wi th linear encoding, we characterize the optimum communication cost for heterogeneous distributed systems with emph{arbitrary} data placement, with $s in mathbb{N}$ stragglers and $a in mathbb{N}$ adversarial nodes. In particular, we show that the optimum communication cost, normalized by the size of the gradient vectors, is equal to $(r-s-2a)^{-1}$, where $r in mathbb{N}$ is the minimum number that a data partition is replicated. In other words, the communication cost is determined by the data partition with the minimum replication, irrespective of the structure of the placement. The proposed achievable scheme also allows us to target the computation of a polynomial function of the aggregated gradient matrix. It also allows us to borrow some ideas from approximation computing and propose an approximate gradient coding scheme for the cases when the repetition in data placement is smaller than what is needed to meet the restriction imposed on communication cost or when the number of stragglers appears to be more than the presumed value in the system design.
A massive multiple input multiple-output system is very important to optimize the trade-off energy efficiency and spectral efficiency in fifth-generation cellular networks. The challenges for the next generation depend on increasing the high data tra ffic in the wireless communication system for both EE and SE. In this paper, the trade off energy efficiency and spectral efficiency based on the first derivative of transmit antennas and transmit power in a downlink massive MIMO system has been investigated. The trade off EE-SE by using a multiobjective optimization problem to decrease transmit power has been analyzed. The EE and SE based on constraint maximum transmit power allocation and a number of antennas by computing the first derivative of transmit power to maximize the trade-off energy efficiency and spectral efficiency has been improved. From the simulation results, the optimum trade-off between EE and SE can be obtained based on the first derivative by selecting the optimal antennas with a low cost of transmit power. Therefore, based on an optimal optimization problem is flexible to make trade-offs between EE-SE for distinct preferences
Spatially coupled serially concatenated codes (SC-SCCs) are a class of spatially coupled turbo-like codes, which have a close-to-capacity performance and low error floor. In this paper we investigate the impact of coupling memory, block length, decod ing window size, and number of iterations on the performance, complexity, and latency of SC-SCCs. Several design tradeoffs are presented to see the relation between these parameters in a wide range. Also, our analysis provides design guidelines for SC-SCCs in different scenarios to make the code design independent of block length. As a result, block length and coupling memory can be exchanged flexibly without changing the latency and complexity. Also, we observe that the performance of SC-SCCs is improved with respect to the uncoupled ensembles for a fixed latency and complexity.

الأسئلة المقترحة

التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا