اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدIR Spectrometer Project for the BTA Telescope
55
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We introduce a project of new cooled infrared spectrometer-photometer for 6-m telescope BTA (Special Astrophysical Observatory of Russian Science Academy). The device would extend the wavelength range accessible for observations on the 6-m BTA telescope toward near infrared (0.8-2.5 um).
قيم البحث
اقرأ أيضاً
The results obtained using the temperature monitoring systems of the 6-m BTA telescope primary mirror, dome space, and external environment are reported. We consider the factors that affect the development of microturbulence in the near-mirror air la
yer and inside the dome space, variation of the telescope focal length with the temperature of its structures, variation of seeing due to temperature gradients inside the primary mirror of the 6-m telescope. The methods used in various observatories for reducing microturbulence are analyzed. We formulate suggestions concerning the improvement of the temperature monitoring system currently in operation and the system of automatic adjustment of the telescope focal length to compensate the thermal drift of the focus during observations.
The Cherenkov Telescope Array (CTA) Project will consist of two arrays of atmospheric Cherenkov telescopes to study high-energy gamma radiation in the range of a few tens of GeV to beyond 100 TeV. To achieve full-sky coverage, the construction of one
array in each terrestrial hemisphere is considered. Suitable candidate sites are being explored and characterized. The candidate sites in the Southern Hemisphere include two locations in Argentina, one in San Antonio de los Cobres (Salta Province, Lat. 24:02:42 S, Long. 66:14:06 W, at 3600 m.a.s.l) and another one in El Leoncito (San Juan Province, Lat. 31:41:49 S, Long. 69:16:21 W, at 2600 m.a.s.l). Here we describe the two sites and the instrumentation that has been deployed to characterize them. We summarize the geographic, atmospheric and climatic data that have been collected for both of them.
We present the design of the prototype telescope and spectrograph system for the Affordable Multiple Aperture Spectroscopy Explorer (AMASE) project. AMASE is a planned project that will pair 100 identical multi-fiber spectrographs with a large array
of telephoto lenses to achieve a large area integral field spectroscopy survey of the sky at the spatial resolution of half an arcminute and a spectral resolution of R=15,000, covering important emission lines in the optical for studying the ionized gas in the Milky Way and beyond. The project will be enabled by a significant reduction in the cost of each spectrograph unit, which is achieved by reducing the beam width and the use of small-pixel CMOS detectors, 50um-core optical fibers, and commercial photographic lenses in the spectrograph. Although constrained by the challenging high spectral resolution requirement, we realize a 40% reduction in cost per fiber at constant etendue relative to, e.g., DESI. As the reduction of cost is much more significant than the reduction in the amount of light received per fiber, replicating such a system many times is more cost effective than building a single large spectrograph that achieves the same survey speed. We present the design of the prototype telescope and instrument system and the study of its cost effectiveness.
We are developing a stable and precise spectrograph for the Large Binocular Telescope (LBT) named iLocater. The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns),
a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use extreme adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.
The present paper describes the current baseline optical design of POLLUX, a high-resolution spectropolarimeter for the future LUVOIR mission. The instrument will operate in the ultraviolet (UV) domain from 90 to 390 nm in both spectropolarimetric an
d pure spectroscopic modes. The working range is split between 3 channels -- far (90-124.5 nm), medium (118.5-195 nm) and near (195-390 nm) UV. Each of the channels is composed of a polarimeter followed by an echelle spectrograph consisting of a classical off-axis paraboloid collimator, echelle grating with a high grooves frequency and a cross-disperser grating operating also as a camera. The latter component integrates some advanced technologies: it is a blazed grating with a complex grooves pattern formed by holographic recording, which is manufactured on a freeform surface. One of the key features underlying the current design is the large spectral length of each order ~6 nm, which allows to record wide spectral lines without any discontinuities. The modelling results show that the optical design will provide the required spectral resolving power higher than R ~ 120,000 over the entire working range for a point source object with angular size of 30 mas. It is also shown that with the 15-m primary mirror of the LUVOIR telescope the instrument will provide an effective collecting area up to 38 569 cm 2. Such a performance will allow to perform a number of groundbreaking scientific observations. Finally, the future work and the technological risks of the design are discussed in details.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
