اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدRotational Characterization of Hayabusa II Target Asteroid (162173) 1999 JU3
533
0
0.0
(
0
)
تأليف
Nicholas Moskovitz
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The Japanese Space Agencys Hayabusa II mission is scheduled to rendezvous with and return a sample from the near-Earth asteroid (162173) 1999 JU3. Previous visible-wavelength spectra of this object show significant variability across multiple epochs which could be the result of a compositionally heterogeneous surface. We present new visible and near-infrared spectra to demonstrate that thermally altered carbonaceous chondrites are plausible compositional analogs, however this is a tentative association due to a lack of any prominent absorption features in our data. We have also conducted a series of high signal-to-noise visible-wavelength observations to investigate the reported surface heterogeneity. Our time series of visible spectra do not show evidence for variability at a precision level of a few percent. This result suggests two most likely possibilities. One, that the surface of 1999 JU3 is homogenous and that unaccounted for systematic effects are causing spectral variation across epochs. Or two, that the surface of 1999 JU3 is regionally heterogenous, in which case existing shape models suggest that any heterogeneity must be limited to terrains smaller than approximately 5% of the total surface area. These new observations represent the last opportunity before both the launch and return of the Hayabusa II spacecraft to perform ground-based characterization of this asteroid. Ultimately, these predictions for composition and surface properties will be tested upon completion of the mission.
قيم البحث
اقرأ أيضاً
The JAXA Hayabusa-2 mission was approved in 2010 and launched on December 3, 2014. The spacecraft will arrive at the near-Earth asteroid 162173 Ryugu in 2018 where it will perform a survey, land and obtain surface material, then depart in Dec 2019 an
d return to Earth in Dec 2020. We observed Ryugu with the Herschel Space Observatory in Apr 2012 at far-IR thermal wavelengths, supported by several ground-based observations to obtain optical lightcurves. We reanalysed previously published Subaru-COMICS and AKARI-IRC observations and merged them with a Spitzer-IRS data set. In addition, we used a large set of Spitzer-IRAC observations obtained in the period Jan to May, 2013. The data set includes two complete rotational lightcurves and a series of ten point-and-shoot observations. The almost spherical shape of the target together with the insufficient lightcurve quality forced us to combine radiometric and lightcurve inversion techniques in different ways to find the objects key physical and thermal parameters. We find that the solution which best matches our data sets leads to this C class asteroid having a retrograde rotation with a spin-axis orientation of (lambda = 310-340 deg; beta = -40+/-15 deg) in ecliptic coordinates, an effective diameter (of an equal-volume sphere) of 850 to 880 m, a geometric albedo of 0.044 to 0.050 and a thermal inertia in the range 150 to 300 Jm-2s-0.5K-1. Based on estimated thermal conductivities of the top-layer surface in the range 0.1 to 0.6 WK-1m-1, we calculated that the grain sizes are approximately equal to between 1 and 10 mm. The finely constrained values for this asteroid serve as a `design reference model, which is currently used for various planning, operational and modelling purposes by the Hayabusa2 team.
We investigated the magnitude-phase relation of (162173) 1999 JU3, a target asteroid for the JAXA Hayabusa 2 sample return mission. We initially employed the international Astronomical Unions H-G formalism but found that it fits less well using a sin
gle set of parameters. To improve the inadequate fit, we employed two photometric functions, the Shevchenko and Hapke functions. With the Shevchenko function, we found that the magnitude-phase relation exhibits linear behavior in a wide phase angle range (alpha = 5-75 deg) and shows weak nonlinear opposition brightening at alpha< 5 deg, providing a more reliable absolute magnitude of Hv = 19.25 +- 0.03. The phase slope (0.039 +- 0.001 mag/deg) and opposition effect amplitude (parameterized by the ratio of intensity at alpha=0.3 deg to that at alpha=5 deg, I(0.3)/I(5)=1.31+-0.05) are consistent with those of typical C-type asteroids. We also attempted to determine the parameters for the Hapke model, which are applicable for constructing the surface reflectance map with the Hayabusa 2 onboard cameras. Although we could not constrain the full set of Hapke parameters, we obtained possible values, w=0.041, g=-0.38, B0=1.43, and h=0.050, assuming a surface roughness parameter theta=20 deg. By combining our photometric study with a thermal model of the asteroid (Mueller et al. in preparation), we obtained a geometric albedo of pv = 0.047 +- 0.003, phase integral q = 0.32 +- 0.03, and Bond albedo AB = 0.014 +- 0.002, which are commensurate with the values for common C-type asteroids.
In order to obtain the substantial information about the surface physics and thermal property of the target asteroid (162173) 1999 JU3, which will be visited by Hayabusa 2 in a sample return mission, with the Advanced Thermal Physical Model (ATPM) we
estimate the possible thermal inertia distribution over its surface, and infer the major material composition of its surface materials. In addition, the effective diameter and geometric albedo are derived to be $D_{rm eff}=1.13pm0.03rm~km$, $p_{rm v}=0.042pm0.003$, respectively, and the average thermal inertia is estimated to be about $(300pm50)rm~Jcdot m^{-2}cdot s^{-0.5}cdot K^{-1}$. According to the derived thermal inertia distribution, we infer that the major area on the surface of the target asteroid may be covered by loose materials, such as rock debris, sands, and so on, but few bare rocks may exist in a very small region. In this sense, the sample return mission of Hayabusa 2 is feasible, when it is performed successfully, it will certainly bring significant scientific information to the research of asteroids.
Near-Earth asteroid 162173 (1999 JU3) is a potential flyby and rendezvous target for interplanetary missions because of its easy to reach orbit. The physical and thermal properties of the asteroid are relevant for establishing the scientific mission
goals and also important in the context of near-Earth object studies in general. Our goal was to derive key physical parameters such as shape, spin-vector, size, geometric albedo, and surface properties of 162173 (1999 JU3). With three sets of published thermal observations (ground-based N-band, Akari IRC, Spitzer IRS), we applied a thermophysical model to derive the radiometric properties of the asteroid. The calculations were performed for the full range of possible shape and spin-vector solutions derived from the available sample of visual lightcurve observations. The near-Earth asteroid 162173 (1999 JU3) has an effective diameter of 0.87 +/- 0.03 km and a geometric albedo of 0.070 +/- 0.006. The chi2-test reveals a strong preference for a retrograde sense of rotation with a spin-axis orientation of lambda_ecl = 73 deg, beta_ecl = -62 deg and P_sid = 7.63 +/- 0.01 h. The most likely thermal inertia ranges between 200 and 600 Jm-2s-0.5K-1, about a factor of 2 lower than the value for 25143 Itokawa. This indicates that the surface lies somewhere between a thick-dust regolith and a rock/boulder/cm-sized, gravel-dominated surface like that of 25143 Itokawa. Our analysis represents the first time that shape and spin-vector information has been derived from a combined data set of visual lightcurves (reflected light) and mid-infrared photometry and spectroscopy (thermal emission).
Near-Earth asteroid 162173 (1999 JU3) is a potential target of two asteroid sample return missions, not only because of its accessibility but also because of the first C-type asteroid for exploration missions. The lightcurve-related physical properti
es of this object were investigated during the 2011-2012 apparition. We aim to confirm the physical parameters useful for JAXAs Hayabusa 2 mission, such as rotational period, absolute magnitude, and phase function. Our data complement previous studies that did not cover low phase angles. With optical imagers and 1-2 m class telescopes, we acquired the photometric data at different phase angles. We independently derived the rotational lightcurve and the phase curve of the asteroid. We have analyzed the lightcurve of 162173 (1999 JU3), and derived a synodic rotational period of 7.625 +/- 0.003 h, the axis ratio a/b = 1.12. The absolute magnitude H_R = 18.69 +/- 0.07 mag and the phase slope of G = -0.09 +/- 0.03 were also obtained based on the observations made during the 2011-2012 apparition.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
