ترغب بنشر مسار تعليمي؟ اضغط هنا

Low abundance, strong features: Window-dressing crystalline forsterite in the disk wall of HD 100546

252   0   0.0 ( 0 )
 نشر من قبل Gijs Mulders
 تاريخ النشر 2011
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Forsterite is one of the crystalline dust species that is often observed in protoplanetary disks and solar system comets. Being absent in the interstellar medium, it must be produced during the disk lifetime. It can therefore serve as a tracer of dust processing and disk evolution, which can lead to a better understanding of the physical processes occurring in the disk, and possibly planet formation. However, the connection of these processes with the overall disk crystallinity remains unclear. We aim to characterize the forsterite abundance and spatial distribution in the disk of the Herbig Be star HD 100546, to investigate if a connection exists with the large disk gap. We use a 2D radiative transfer code, MCMax, to model the circumstellar dust around HD 100546. We use VISIR Q-band imaging to probe the outer disk geometry and mid-infrared features to model the spatial distribution of forsterite. The temperature-dependent shape of the 69 micron feature observed with Herschel PACS is used as a critical tool to constrain this distribution. We find a crystalline mass fraction of 40 - 60 %, located close to the disk wall between 13 and 20 AU, and possibly farther out at the disk surface. The forsterite is in thermal contact with the other dust species. We put an upper limit on the iron content of forsterite of 0.3 %. Optical depth effects play a key role in explaining the observed forsterite features, hiding warm forsterite from view at short wavelengths. The disk wall acts as a showcase: it displays a localized high abundance of forsterite, which gives rise to a high observed crystallinity, while the overall mass fraction of forsterite is a factor of ten lower.

قيم البحث

اقرأ أيضاً

98 - Jaime E. Pineda 2014
The disk around the Herbig Ae/Be star HD 100546 has been extensively studied and it is one of the systems for which there are observational indications of ongoing and/or recent planet formation. However, up until now no resolved image of the millimet er dust emission or the gas has been published. We present the first resolved images of the disk around HD 100546 obtained in Band 7 with the ALMA observatory. The CO (3-2) image reveals a gas disk that extends out to 350 au radius at the 3-sigma level. Surprisingly, the 870um dust continuum emission is compact (radius <60 au) and asymmetric. The dust emission is well matched by a truncated disk with outer radius of $approx$50 au. The lack of millimeter-sized particles outside the 60 au is consistent with radial drift of particles of this size. The protoplanet candidate, identified in previous high-contrast NACO/VLT L observations, could be related to the sharp outer edge of the millimeter-sized particles. Future higher angular resolution ALMA observations are needed to determine the detailed properties of the millimeter emission and the gas kinematics in the inner region (<2arcsec). Such observations could also reveal the presence of a planet through the detection of circumplanetary disk material.
Protoplanetary disks around young stars harbor many structures related to planetary formation. Of particular interest, spiral patterns were discovered among several of these disks and are expected to be the sign of gravitational instabilities leading to giant planets formation or gravitational perturbations caused by already existing planets. In this context, the star HD100546 presents some specific characteristics with a complex gas and dusty disk including spirals as well as a possible planet in formation. The objective of this study is to analyze high contrast and high angular resolution images of this emblematic system to shed light on critical steps of the planet formation. We retrieved archival images obtained at Gemini in the near IR (Ks band) with the instrument NICI and processed the data using advanced high contrast imaging technique taking advantage of the angular differential imaging. These new images reveal the spiral pattern previously identified with HST with an unprecedented resolution, while the large-scale structure of the disk is mostly erased by the data processing. The single pattern at the southeast in HST images is now resolved into a multi-armed spiral pattern. Using two models of a gravitational perturber orbiting in a gaseous disk we attempted to bring constraints on the characteristics of this perturber assuming each spiral being independent and we derived qualitative conclusions. The non-detection of the northeast spiral pattern observed in HST allows to put a lower limit on the intensity ratio between the two sides of the disk, which if interpreted as forward scattering yields a larger anisotropic scattering than derived in the visible. Also, we found that the spirals are likely spatially resolved with a thickness of about 5-10AU. Finally, we did not detect the candidate forming planet recently discovered in the Lp band, with a mass upper limit of 16-18 MJ.
67 - M. Honda , T. Kudo , S. Takatsuki 2016
We made near infrared multicolor imaging observations of a disk around Herbig Be star HD100546 using Gemini/NICI. K (2.2,$mu$m), H$_2$O ice (3.06,$mu$m), and L(3.8,$mu$m) disk images were obtained and we found the 3.1,$mu$m absorption feature in the scattered light spectrum, likely due to water ice grains at the disk surface. We compared the observed depth of the ice absorption feature with the disk model based on cite{Oka2012} including water ice photodesorption effect by stellar UV photons. The observed absorption depth can be explained by the both disk models with/without photodesorption effect within the measurement accuracy, but slightly favors the model with photodesorption effects, implying that the UV photons play an important role on the survival/destruction of ice grains at the Herbig Ae/Be disk surface. Further improvement on the accuracy of the observations of the water ice absorption depth is needed to constrain the disk models.
Carbonaceous nano-grains are present at the surface of protoplanetary disks around Herbig Ae/Be stars, where most of the central star UV energy is dissipated. Efficiently coupled to the gas, nano-grains are able to trace the disk outer flaring parts, and possibly the gaps from which the larger grains are missing. We examine the spatial distribution and evolution of the nano-dust emission in the (pre-)transitional disk HD100546 that shows annular gaps, rings, and spirals, and reveals rich carbon nano-dust spectroscopic signatures (aromatic, aliphatic) in a wide spatial range (~20-200au). We analyse adaptive optics spectroscopic observations from 3 to 4um and imaging and spectroscopic observations from 8 to 12um. We compare the data to model predictions using the THEMIS model with the radiative transfer code POLARIS calculating heating of micro- and nanometric dust grains for a given disk structure. The aromatic features at 3.3, 8.6 and 11.3um, as well as, the aliphatic ones from 3.4 to 3.5um are spatially extended with band morphologies dependong on local physical conditions. The aliphatic-to-aromatic band ratio 3.4/3.3 increases with the distance from the star suggesting UV processing. In the 8-12um observed spectra, features characteristic of aromatic particles and crystalline silicates are detected with their relative contribution changing with distance to the star. The model predicts that the features and adjacent continuum are due to different combinations of grain sub-populations, with a dependence on the UV field intensity. Shorter wavelength features are dominated by the smallest grains (< 0.7nm) throughout the disk, while at longer wavelengths what dominates the emission close to the star is a mix of several grain populations, and far away from the star is the largest nano-grain population.
The thermal desorption of ammonia (NH$_3$) from single crystal forsterite (010) has been investigated using temperature-programmed desorption. The effect of defects on the desorption process has been probed by the use of a rough cut forsterite surfac e prepared from the cleaved forsterite sample. Several approaches have been used to extract the desorption energy and pre-exponential factor describing the desorption kinetics. In the sub-monolayer coverage regime, the NH$_3$ desorption shows a broad distribution of desorption energies, indicating the presence of different adsorption sites, which results in an apparent coverage-dependent desorption energy. This distribution is sensitive to the surface roughness with the cut forsterite surface displaying a significantly broader distribution of desorption energies compared to the cleaved forsterite surface. The cut forsterite surface exhibits sites with desorption energies up to 62.5 kJ mol$^{-1} $ in comparison to a desorption energy of up to 58.0 kJ mol$^{-1} $ for the cleaved surface. Multilayer desorption is independent of the nature of the forsterite surface used, with a desorption energy of ($25.8pm0.9$) kJ mol$^{-1} $. On astrophysically relevant heating time-scales, the presence of a coverage dependent desorption energy distribution results in a lengthening of the NH$_3$ desorption time-scale by $5.9times 10^4$ yr compared to that expected for a single desorption energy. In addition, the presence of a larger number of high-energy adsorption sites on the rougher cut forsterite surface leads to a further lengthening of ca. 7000 yr.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا