ترغب بنشر مسار تعليمي؟ اضغط هنا

Measuring Stellar Radial Velocities with a Dispersed Fixed-Delay Interferometer

110   0   0.0 ( 0 )
 نشر من قبل Suvrath Mahadevan
 تاريخ النشر 2008
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We demonstrate the ability to measure precise stellar barycentric radial velocities with the dispersed fixed-delay interferometer technique using the Exoplanet Tracker (ET), an instrument primarily designed for precision differential Doppler velocity measurements using this technique. Our barycentric radial velocities, derived from observations taken at the KPNO 2.1 meter telescope, differ from those of Nidever et al. by 0.047 km/s (rms) when simultaneous iodine calibration is used, and by 0.120 km/s (rms) without simultaneous iodine calibration. Our results effectively show that a Michelson interferometer coupled to a spectrograph allows precise measurements of barycentric radial velocities even at a modest spectral resolution of R ~ 5100. A multi-object version of the ET instrument capable of observing ~500 stars per night is being used at the Sloan 2.5 m telescope at Apache Point Observatory for the Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS), a wide-field radial velocity survey for extrasolar planets around TYCHO-2 stars in the magnitude range 7.6<V<12. In addition to precise differential velocities, this survey will also yield precise barycentric radial velocities for many thousands of stars using the data analysis techniques reported here. Such a large kinematic survey at high velocity precision will be useful in identifying the signature of accretion events in the Milky Way and understanding local stellar kinematics in addition to discovering exoplanets, brown dwarfs and spectroscopic binaries.



قيم البحث

اقرأ أيضاً

The Exoplanet Tracker is a prototype of a new type of fibre-fed instrument for performing high precision relative Doppler measurements to detect extra-solar planets. A combination of Michelson interferometer and medium resolution spectrograph, this l ow-cost instrument facilitates radial velocity measurements with high throughput over a small bandwidth (~ 300 Angstroms), and has the potential to be designed for multi-object operation with moderate bandwidths (~1000 Angstroms). We present the first planet detection with this new type of instrument, a successful confirmation of the well established planetary companion to 51 Peg, showing an rms precision of 11.5m/s over five days. We also show comparison measurements of the radial velocity stable star, Eta Cas, showing an rms precision of 7.9m/s over seven days. These new results are starting to approach the precision levels obtained with traditional radial velocity techniques based on cross-dispersed echelles. We anticipate that this new technique could have an important impact in the search for extra-solar planets.
102 - Ji Wang , Jian Ge , Xiaoke Wan 2011
The dispersed fixed-delay Intereferometer (DFDI) method is attractive for its low cost, compact size, and multiobject capability in precision radial-velocity (RV) measurements. The phase shift of fringes of stellar absorption lines is measured and th en converted to an RV shift via an important parameter, phase-to-velocity scale (PV scale), determined by the group delay (GD) of a fixed-delay interferometer. Two methods of GD measurement using a DFDI Doppler instrument are presented in this article: (1) GD measurement using white-light combs gen- erated by the fixed-delay interferometer and (2) GD calibration using an RV reference star. These two methods provide adequate precision of GD measurement and calibration, given the current RV precision achieved by a DFDI Doppler instrument. They can potentially be used to measure GD of an fixed-delay interferometer for submeter- precision Doppler measurement with a DFDI instrument. Advantages and limitations of each method are discussed in detail. The two methods can serve as standard procedures of PV-scale calibration for DFDI instruments and cross- checks for each other.
The dispersed fixed-delay interferometer (DFDI) represents a new instrument concept for high-precision radial velocity (RV) surveys for extrasolar planets. A combination of Michelson interferometer and medium-resolution spectrograph, it has the poten tial for performing multi-object surveys, where most previous RV techniques have been limited to observing only one target at a time. Because of the large sample of extrasolar planets needed to better understand planetary formation, evolution, and prevalence, this new technique represents a logical next step in instrumentation for RV extrasolar planet searches, and has been proven with the single-object Exoplanet Tracker (ET) at Kitt Peak National Observatory, and the multi-object W. M. Keck/MARVELS Exoplanet Tracker at Apache Point Observatory. The development of the ET instruments has necessitated fleshing out a detailed understanding of the physical principles of the DFDI technique. Here we summarize the fundamental theoretical material needed to understand the technique and provide an overview of the physics underlying the instruments working. We also derive some useful analytical formulae that can be used to estimate the level of various sources of error generic to the technique, such as photon shot noise when using a fiducial reference spectrum, contamination by secondary spectra (e.g., crowded sources, spectroscopic binaries, or moonlight contamination), residual interferometer comb, and reference cross-talk error. Following this, we show that the use of a traditional gas absorption fiducial reference with a DFDI can incur significant systematic errors that must be taken into account at the precision levels required to detect extrasolar planets.
Precise near-infrared radial velocimetry enables efficient detection and transit verification of low-mass extrasolar planets orbiting M dwarf hosts, which are faint for visible-wavelength radial velocity surveys. The TripleSpec Exoplanet Discovery In strument, or TEDI, is the combination of a variable-delay Michelson interferometer and a medium-resolution (R=2700) near-infrared spectrograph on the Palomar 200 Hale Telescope. We used TEDI to monitor GJ 699, a nearby mid-M dwarf, over 11 nights spread across 3 months. Analysis of 106 independent observations reveals a root-mean-square precision of less than 37 m/s for 5 minutes of integration time. This performance is within a factor of 2 of our expected photon-limited precision. We further decompose the residuals into a 33 m/s white noise component, and a 15 m/s systematic noise component, which we identify as likely due to contamination by telluric absorption lines. With further development this technique holds promise for broad implementation on medium-resolution near-infrared spectrographs to search for low-mass exoplanets orbiting M dwarfs, and to verify low-mass transit candidates.
Radial velocity identification of extrasolar planets has historically been dominated by optical surveys. Interest in expanding exoplanet searches to M dwarfs and young stars, however, has motivated a push to improve the precision of near infrared rad ial velocity techniques. We present our methodology for achieving 58 m/s precision in the K band on the M0 dwarf GJ 281 using the CSHELL spectrograph at the 3-meter NASA IRTF. We also demonstrate our ability to recover the known 4 Mjup exoplanet Gl 86 b and discuss the implications for success in detecting planets around 1-3 Myr old T Tauri stars.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا