اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMatrix Exponential-Based Closures for the Turbulent Subgrid-Scale Stress Tensor
133
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Two approaches for closing the turbulence subgrid-scale stress tensor in terms of matrix exponentials are introduced and compared. The first approach is based on a formal solution of the stress transport equation in which the production terms can be integrated exactly in terms of matrix exponentials. This formal solution of the subgrid-scale stress transport equation is shown to be useful to explore special cases, such as the response to constant velocity gradient, but neglecting pressure-strain correlations and diffusion effects. The second approach is based on an Eulerian-Lagrangian change of variables, combined with the assumption of isotropy for the conditionally averaged Lagrangian velocity gradient tensor and with the `Recent Fluid Deformation (RFD) approximation. It is shown that both approaches lead to the same basic closure in which the stress tensor is expressed as the product of the matrix exponential of the resolved velocity gradient tensor multiplied by its transpose. Short-time expansions of the matrix exponentials are shown to provide an eddy-viscosity term and particular quadratic terms, and thus allow a reinterpretation of traditional eddy-viscosity and nonlinear stress closures. The basic feasibility of the matrix-exponential closure is illustrated by implementing it successfully in Large Eddy Simulation of forced isotropic turbulence. The matrix-exponential closure employs the drastic approximation of entirely omitting the pressure-strain correlation and other `nonlinear scrambling terms. But unlike eddy-viscosity closures, the matrix exponential approach provides a simple and local closure that can be derived directly from the stress transport equation with the production term, and using physically motivated assumptions about Lagrangian decorrelation and upstream isotropy.
قيم البحث
اقرأ أيضاً
Reynolds-averaged Navier-Stokes (RANS) equations are presently one of the most popular models for simulating turbulence. Performing RANS simulation requires additional modeling for the anisotropic Reynolds stress tensor, but traditional Reynolds stre
ss closure models lead to only partially reliable predictions. Recently, data-driven turbulence models for the Reynolds anisotropy tensor involving novel machine learning techniques have garnered considerable attention and have been rapidly developed. Focusing on modeling the Reynolds stress closure for the specific case of turbulent channel flow, this paper proposes three modifications to a standard neural network to account for the no-slip boundary condition of the anisotropy tensor, the Reynolds number dependence, and spatial non-locality. The modified models are shown to provide increased predicative accuracy compared to the standard neural network when they are trained and tested on channel flow at different Reynolds numbers. The best performance is yielded by the model combining the boundary condition enforcement and Reynolds number injection. This model also outperforms the Tensor Basis Neural Network (Ling et al., 2016) on the turbulent channel flow dataset.
A nonlocal subgrid-scale stress (SGS) model is developed based on the convolution neural network (CNN), a powerful supervised data-driven approach. The CNN is an ideal approach to naturally consider nonlocal spatial information in prediction due to i
ts wide receptive field. The CNN-based models used here only take primitive flow variables as input, then the flow features are automatically extracted without any $priori$ guidance. The nonlocal models trained by direct numerical simulation (DNS) data of a turbulent channel flow at $Re_{tau}=178$ are accessed in both the $priori$ and $posteriori$ test, providing physically reasonable flow statistics (like mean velocity and velocity fluctuations) closing to the DNS results even when extrapolating to a higher Reynolds number $Re_{tau}=600$. In our model, the backscatter is also predicted well and the numerical simulation is stable. The nonlocal models outperform local data-driven models like artificial neural network and some SGS models, e.g. the Smagorinsky model in actual large eddy simulation (LES). The model is also robust since stable solutions can be obtained when examining the grid resolution from one-half to double of the spatial resolution used in training. We also investigate the influence of receptive fields and suggest using the two-point correlation analysis as a quantitative method to guide the design of nonlocal physical models. To facilitate the combination of machine learning (ML) algorithms to computational fluid dynamics (CFD), a novel heterogeneous ML-CFD framework is proposed. The present study provides the effective data-driven nonlocal methods for SGS modelling in the LES of complex anisotropic turbulent flows.
The Reynolds-averaged Navier-Stokes (RANS) equations are widely used in turbulence applications. They require accurately modeling the anisotropic Reynolds stress tensor, for which traditional Reynolds stress closure models only yield reliable results
in some flow configurations. In the last few years, there has been a surge of work aiming at using data-driven approaches to tackle this problem. The majority of previous work has focused on the development of fully-connected networks for modeling the anisotropic Reynolds stress tensor. In this paper, we expand upon recent work for turbulent channel flow and develop new convolutional neural network (CNN) models that are able to accurately predict the normalized anisotropic Reynolds stress tensor. We apply the new CNN model to a number of one-dimensional turbulent flows. Additionally, we present interpretability techniques that help drive the model design and provide guidance on the model behavior in relation to the underlying physics.
We present a new approach for constructing data-driven subgrid stress models for large eddy simulation of turbulent flows. The key to our approach is representation of model input and output tensors in the filtered strain rate eigenframe. Provided in
puts and outputs are selected and non-dimensionalized in a suitable manner, this yields a model form that is symmetric, Galilean invariant, rotationally invariant, reflectionally invariant, and unit invariant. We use this model form to train a simple and efficient neural network model using only one time step of filtered direct numerical simulation data from a forced homogeneous isotropic turbulence simulation. We demonstrate the accuracy of this model as well as the models ability to generalize to previously unseen filter widths, Reynolds numbers, and flow physics using a priori and a posteriori tests.
By utilizing diffusion maps embedding and transition matrix analysis we investigate sparse temperature measurement time-series data from Rayleigh--Benard convection experiments in a cylindrical container of aspect ratio $Gamma=D/L=0.5$ between its di
ameter ($D$) and height ($L$). We consider the two cases of a cylinder at rest and rotating around its cylinder axis. We find that the relative amplitude of the large-scale circulation (LSC) and its orientation inside the container at different points in time are associated to prominent geometric features in the embedding space spanned by the two dominant diffusion-maps eigenvectors. From this two-dimensional embedding we can measure azimuthal drift and diffusion rates, as well as coherence times of the LSC. In addition, we can distinguish from the data clearly the single roll state (SRS), when a single roll extends through the whole cell, from the double roll state (DRS), when two counter-rotating rolls are on top of each other. Based on this embedding we also build a transition matrix (a discrete transfer operator), whose eigenvectors and eigenvalues reveal typical time scales for the stability of the SRS and DRS as well as for the azimuthal drift velocity of the flow structures inside the cylinder. Thus, the combination of nonlinear dimension reduction and dynamical systems tools enables to gain insight into turbulent flows without relying on model assumptions.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
