اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMIMS: Towards a Message Interface based Memory System
173
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Memory system is often the main bottleneck in chipmultiprocessor (CMP) systems in terms of latency, bandwidth and efficiency, and recently additionally facing capacity and power problems in an era of big data. A lot of research works have been done to address part of these problems, such as photonics technology for bandwidth, 3D stacking for capacity, and NVM for power as well as many micro-architecture level innovations. Many of them need a modification of current memory architecture, since the decades-old synchronous memory architecture (SDRAM) has become an obstacle to adopt those advances. However, to the best of our knowledge, none of them is able to provide a universal memory interface that is scalable enough to cover all these problems. In this paper, we argue that a message-based interface should be adopted to replace the traditional bus-based interface in memory system. A novel message interface based memory system (MIMS) is proposed. The key innovation of MIMS is that processor and memory system communicate through a universal and flexible message interface. Each message packet could contain multiple memory requests or commands along with various semantic information. The memory system is more intelligent and active by equipping with a local buffer scheduler, which is responsible to process packet, schedule memory requests, and execute specific commands with the help of semantic information. The experimental results by simulator show that, with accurate granularity message, the MIMS would improve performance by 53.21%, while reducing energy delay product (EDP) by 55.90%, the effective bandwidth utilization is improving by 62.42%. Furthermore, combining multiple requests in a packet would reduce link overhead and provide opportunity for address compression.
قيم البحث
اقرأ أيضاً
Commodity memory interfaces have difficulty in scaling memory capacity to meet the needs of modern multicore and big data systems. DRAM device density and maximum device count are constrained by technology, package, and signal in- tegrity issues that
limit total memory capacity. Synchronous DRAM protocols require data to be returned within a fixed latency, and thus memory extension methods over commodity DDRx interfaces fail to support scalable topologies. Current extension approaches either use slow PCIe interfaces, or require expensive changes to the memory interface, which limits commercial adoptability. Here we propose twin-load, a lightweight asynchronous memory access mechanism over the synchronous DDRx interface. Twin-load uses two special loads to accomplish one access request to extended memory, the first serves as a prefetch command to the DRAM system, and the second asynchronously gets the required data. Twin-load requires no hardware changes on the processor side and only slight soft- ware modifications. We emulate this system on a prototype to demonstrate the feasibility of our approach. Twin-load has comparable performance to NUMA extended memory and outperforms a page-swapping PCIe-based system by several orders of magnitude. Twin-load thus enables instant capacity increases on commodity platforms, but more importantly, our architecture opens opportunities for the design of novel, efficient, scalable, cost-effective memory subsystems.
Hybrid memory systems, comprised of emerging non-volatile memory (NVM) and DRAM, have been proposed to address the growing memory demand of applications. Emerging NVM technologies, such as phase-change memories (PCM), memristor, and 3D XPoint, have h
igher capacity density, minimal static power consumption and lower cost per GB. However, NVM has longer access latency and limited write endurance as opposed to DRAM. The different characteristics of two memory classes point towards the design of hybrid memory systems containing multiple classes of main memory. In the iterative and incremental development of new architectures, the timeliness of simulation completion is critical to project progression. Hence, a highly efficient simulation method is needed to evaluate the performance of different hybrid memory system designs. Design exploration for hybrid memory systems is challenging, because it requires emulation of the full system stack, including the OS, memory controller, and interconnect. Moreover, benchmark applications for memory performance test typically have much larger working sets, thus taking even longer simulation warm-up period. In this paper, we propose a FPGA-based hybrid memory system emulation platform. We target at the mobile computing system, which is sensitive to energy consumption and is likely to adopt NVM for its power efficiency. Here, because the focus of our platform is on the design of the hybrid memory system, we leverage the on-board hard IP ARM processors to both improve simulation performance while improving accuracy of the results. Thus, users can implement their data placement/migration policies with the FPGA logic elements and evaluate new designs quickly and effectively. Results show that our emulation platform provides a speedup of 9280x in simulation time compared to the software counterpart Gem5.
Computers continue to diversify with respect to system designs, emerging memory technologies, and application memory demands. Unfortunately, continually adapting the conventional virtual memory framework to each possible system configuration is chall
enging, and often results in performance loss or requires non-trivial workarounds. To address these challenges, we propose a new virtual memory framework, the Virtual Block Interface (VBI). We design VBI based on the key idea that delegating memory management duties to hardware can reduce the overheads and software complexity associated with virtual memory. VBI introduces a set of variable-sized virtual blocks (VBs) to applications. Each VB is a contiguous region of the globally-visible VBI address space, and an application can allocate each semantically meaningful unit of information (e.g., a data structure) in a separate VB. VBI decouples access protection from memory allocation and address translation. While the OS controls which programs have access to which VBs, dedicated hardware in the memory controller manages the physical memory allocation and address translation of the VBs. This approach enables several architectural optimizations to (1) efficiently and flexibly cater to different and increasingly diverse system configurations, and (2) eliminate key inefficiencies of conventional virtual memory. We demonstrate the benefits of VBI with two important use cases: (1) reducing the overheads of address translation (for both native execution and virtual machine environments), as VBI reduces the number of translation requests and associated memory accesses; and (2) two heterogeneous main memory architectures, where VBI increases the effectiveness of managing fast memory regions. For both cases, VBI significanttly improves performance over conventional virtual memory.
The sizes of GPU applications are rapidly growing. They are exhausting the compute and memory resources of a single GPU, and are demanding the move to multiple GPUs. However, the performance of these applications scales sub-linearly with GPU count be
cause of the overhead of data movement across multiple GPUs. Moreover, a lack of hardware support for coherency exacerbates the problem because a programmer must either replicate the data across GPUs or fetch the remote data using high-overhead off-chip links. To address these problems, we propose a multi-GPU system with truly shared memory (MGPU-TSM), where the main memory is physically shared across all the GPUs. We eliminate remote accesses and avoid data replication using an MGPU-TSM system, which simplifies the memory hierarchy. Our preliminary analysis shows that MGPU-TSM with 4 GPUs performs, on average, 3.9x? better than the current best performing multi-GPU configuration for standard application benchmarks.
Even with generational improvements in DRAM technology, memory access latency still remains the major bottleneck for application accelerators, primarily due to limitations in memory interface IPs which cannot fully account for variations in target ap
plications, the algorithms used, and accelerator architectures. Since developing memory controllers for different applications is time-consuming, this paper introduces a modular and programmable memory controller that can be configured for different target applications on available hardware resources. The proposed memory controller efficiently supports cache-line accesses along with bulk memory transfers. The user can configure the controller depending on the available logic resources on the FPGA, memory access pattern, and external memory specifications. The modular design supports various memory access optimization techniques including, request scheduling, internal caching, and direct memory access. These techniques contribute to reducing the overall latency while maintaining high sustained bandwidth. We implement the system on a state-of-the-art FPGA and evaluate its performance using two widely studied domains: graph analytics and deep learning workloads. We show improved overall memory access time up to 58% on CNN and GCN workloads compared with commercial memory controller IPs.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
