اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFPGA-based Hyrbid Memory Emulation System
87
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Hybrid memory systems, comprised of emerging non-volatile memory (NVM) and DRAM, have been proposed to address the growing memory demand of applications. Emerging NVM technologies, such as phase-change memories (PCM), memristor, and 3D XPoint, have higher capacity density, minimal static power consumption and lower cost per GB. However, NVM has longer access latency and limited write endurance as opposed to DRAM. The different characteristics of two memory classes point towards the design of hybrid memory systems containing multiple classes of main memory. In the iterative and incremental development of new architectures, the timeliness of simulation completion is critical to project progression. Hence, a highly efficient simulation method is needed to evaluate the performance of different hybrid memory system designs. Design exploration for hybrid memory systems is challenging, because it requires emulation of the full system stack, including the OS, memory controller, and interconnect. Moreover, benchmark applications for memory performance test typically have much larger working sets, thus taking even longer simulation warm-up period. In this paper, we propose a FPGA-based hybrid memory system emulation platform. We target at the mobile computing system, which is sensitive to energy consumption and is likely to adopt NVM for its power efficiency. Here, because the focus of our platform is on the design of the hybrid memory system, we leverage the on-board hard IP ARM processors to both improve simulation performance while improving accuracy of the results. Thus, users can implement their data placement/migration policies with the FPGA logic elements and evaluate new designs quickly and effectively. Results show that our emulation platform provides a speedup of 9280x in simulation time compared to the software counterpart Gem5.
قيم البحث
اقرأ أيضاً
Even with generational improvements in DRAM technology, memory access latency still remains the major bottleneck for application accelerators, primarily due to limitations in memory interface IPs which cannot fully account for variations in target ap
plications, the algorithms used, and accelerator architectures. Since developing memory controllers for different applications is time-consuming, this paper introduces a modular and programmable memory controller that can be configured for different target applications on available hardware resources. The proposed memory controller efficiently supports cache-line accesses along with bulk memory transfers. The user can configure the controller depending on the available logic resources on the FPGA, memory access pattern, and external memory specifications. The modular design supports various memory access optimization techniques including, request scheduling, internal caching, and direct memory access. These techniques contribute to reducing the overall latency while maintaining high sustained bandwidth. We implement the system on a state-of-the-art FPGA and evaluate its performance using two widely studied domains: graph analytics and deep learning workloads. We show improved overall memory access time up to 58% on CNN and GCN workloads compared with commercial memory controller IPs.
This paper describes JANUS, a modular massively parallel and reconfigurable FPGA-based computing system. Each JANUS module has a computational core and a host. The computational core is a 4x4 array of FPGA-based processing elements with nearest-neigh
bor data links. Processors are also directly connected to an I/O node attached to the JANUS host, a conventional PC. JANUS is tailored for, but not limited to, the requirements of a class of hard scientific applications characterized by regular code structure, unconventional data manipulation instructions and not too large data-base size. We discuss the architecture of this configurable machine, and focus on its use on Monte Carlo simulations of statistical mechanics. On this class of application JANUS achieves impressive performances: in some cases one JANUS processing element outperfoms high-end PCs by a factor ~ 1000. We also discuss the role of JANUS on other classes of scientific applications.
Memory system is often the main bottleneck in chipmultiprocessor (CMP) systems in terms of latency, bandwidth and efficiency, and recently additionally facing capacity and power problems in an era of big data. A lot of research works have been done t
o address part of these problems, such as photonics technology for bandwidth, 3D stacking for capacity, and NVM for power as well as many micro-architecture level innovations. Many of them need a modification of current memory architecture, since the decades-old synchronous memory architecture (SDRAM) has become an obstacle to adopt those advances. However, to the best of our knowledge, none of them is able to provide a universal memory interface that is scalable enough to cover all these problems. In this paper, we argue that a message-based interface should be adopted to replace the traditional bus-based interface in memory system. A novel message interface based memory system (MIMS) is proposed. The key innovation of MIMS is that processor and memory system communicate through a universal and flexible message interface. Each message packet could contain multiple memory requests or commands along with various semantic information. The memory system is more intelligent and active by equipping with a local buffer scheduler, which is responsible to process packet, schedule memory requests, and execute specific commands with the help of semantic information. The experimental results by simulator show that, with accurate granularity message, the MIMS would improve performance by 53.21%, while reducing energy delay product (EDP) by 55.90%, the effective bandwidth utilization is improving by 62.42%. Furthermore, combining multiple requests in a packet would reduce link overhead and provide opportunity for address compression.
Deep convolutional neural networks have achieved remarkable progress in recent years. However, the large volume of intermediate results generated during inference poses a significant challenge to the accelerator design for resource-constraint FPGA. D
ue to the limited on-chip storage, partial results of intermediate layers are frequently transferred back and forth between on-chip memory and off-chip DRAM, leading to a non-negligible increase in latency and energy consumption. In this paper, we propose block convolution, a hardware-friendly, simple, yet efficient convolution operation that can completely avoid the off-chip transfer of intermediate feature maps at run-time. The fundamental idea of block convolution is to eliminate the dependency of feature map tiles in the spatial dimension when spatial tiling is used, which is realized by splitting a feature map into independent blocks so that convolution can be performed separately on individual blocks. We conduct extensive experiments to demonstrate the efficacy of the proposed block convolution on both the algorithm side and the hardware side. Specifically, we evaluate block convolution on 1) VGG-16, ResNet-18, ResNet-50, and MobileNet-V1 for ImageNet classification task; 2) SSD, FPN for COCO object detection task, and 3) VDSR for Set5 single image super-resolution task. Experimental results demonstrate that comparable or higher accuracy can be achieved with block convolution. We also showcase two CNN accelerators via algorithm/hardware co-design based on block convolution on memory-limited FPGAs, and evaluation shows that both accelerators substantially outperform the baseline without off-chip transfer of intermediate feature maps.
Various hardware accelerators have been developed for energy-efficient and real-time inference of neural networks on edge devices. However, most training is done on high-performance GPUs or servers, and the huge memory and computing costs prevent tra
ining neural networks on edge devices. This paper proposes a novel tensor-based training framework, which offers orders-of-magnitude memory reduction in the training process. We propose a novel rank-adaptive tensorized neural network model, and design a hardware-friendly low-precision algorithm to train this model. We present an FPGA accelerator to demonstrate the benefits of this training method on edge devices. Our preliminary FPGA implementation achieves $59times$ speedup and $123times$ energy reduction compared to embedded CPU, and $292times$ memory reduction over a standard full-size training.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
