اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTwin-Load: Building a Scalable Memory System over the Non-Scalable Interface
165
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Commodity memory interfaces have difficulty in scaling memory capacity to meet the needs of modern multicore and big data systems. DRAM device density and maximum device count are constrained by technology, package, and signal in- tegrity issues that limit total memory capacity. Synchronous DRAM protocols require data to be returned within a fixed latency, and thus memory extension methods over commodity DDRx interfaces fail to support scalable topologies. Current extension approaches either use slow PCIe interfaces, or require expensive changes to the memory interface, which limits commercial adoptability. Here we propose twin-load, a lightweight asynchronous memory access mechanism over the synchronous DDRx interface. Twin-load uses two special loads to accomplish one access request to extended memory, the first serves as a prefetch command to the DRAM system, and the second asynchronously gets the required data. Twin-load requires no hardware changes on the processor side and only slight soft- ware modifications. We emulate this system on a prototype to demonstrate the feasibility of our approach. Twin-load has comparable performance to NUMA extended memory and outperforms a page-swapping PCIe-based system by several orders of magnitude. Twin-load thus enables instant capacity increases on commodity platforms, but more importantly, our architecture opens opportunities for the design of novel, efficient, scalable, cost-effective memory subsystems.
قيم البحث
اقرأ أيضاً
While reduction in feature size makes computation cheaper in terms of latency, area, and power consumption, performance of emerging data-intensive applications is determined by data movement. These trends have introduced the concept of scalability as
reaching a desirable performance per unit cost by using as few number of units as possible. Many proposals have moved compute closer to the memory. However, these efforts ignored maintaining a balance between bandwidth and compute rate of an architecture, with those of applications, which is a key principle in designing scalable large systems. This paper proposes the use of memory slices, a modular building block for scalable memory systems integrated with compute, in which performance scales with memory size (and volume of data). The slice architecture utilizes a programmable memory interface feeding a systolic compute engine with high reuse rate. The modularity feature of slice-based systems is exploited with a partitioning and data mapping strategy across allocated memory slices where training performance scales with the data size. These features enable shifting the most pressure to cheap compute units rather than expensive memory accesses or transfers via interconnection network. An application of the memory slices to a scale-out memory system is accelerating the training of recurrent, convolutional, and hybrid neural networks (RNNs and RNNs+CNN) that are forming cloud workloads. The results of our cycle-level simulations show that memory slices exhibits a superlinear speedup when the number of slices increases. Furthermore, memory slices improve power efficiency to 747 GFLOPs/J for training LSTMs. While our current evaluation uses memory slices with 3D packaging, a major value is that slices can also be constructed with a variety of packaging options, for example with DDR-based memory units.
Memory system is often the main bottleneck in chipmultiprocessor (CMP) systems in terms of latency, bandwidth and efficiency, and recently additionally facing capacity and power problems in an era of big data. A lot of research works have been done t
o address part of these problems, such as photonics technology for bandwidth, 3D stacking for capacity, and NVM for power as well as many micro-architecture level innovations. Many of them need a modification of current memory architecture, since the decades-old synchronous memory architecture (SDRAM) has become an obstacle to adopt those advances. However, to the best of our knowledge, none of them is able to provide a universal memory interface that is scalable enough to cover all these problems. In this paper, we argue that a message-based interface should be adopted to replace the traditional bus-based interface in memory system. A novel message interface based memory system (MIMS) is proposed. The key innovation of MIMS is that processor and memory system communicate through a universal and flexible message interface. Each message packet could contain multiple memory requests or commands along with various semantic information. The memory system is more intelligent and active by equipping with a local buffer scheduler, which is responsible to process packet, schedule memory requests, and execute specific commands with the help of semantic information. The experimental results by simulator show that, with accurate granularity message, the MIMS would improve performance by 53.21%, while reducing energy delay product (EDP) by 55.90%, the effective bandwidth utilization is improving by 62.42%. Furthermore, combining multiple requests in a packet would reduce link overhead and provide opportunity for address compression.
64 -
Mario Fischer
, Juergen Wassner (Department of Engineering andn Architecture
, Lucerne University of Applied Sciences
2020
Deep Convolutional Neural Networks (CNNs) have become state-of-the art for computer vision and other signal processing tasks due to their superior accuracy. In recent years, large efforts have been made to reduce the computational costs of CNNs in or
der to achieve real-time operation on low-power embedded devices. Towards this goal we present BinArray, a custom hardware accelerator for CNNs with binary approximated weights. The binary approximation used in this paper is an improved version of a network compression technique initially suggested in [1]. It drastically reduces the number of multiplications required per inference with no or very little accuracy degradation. BinArray easily scales and allows to compromise between hardware resource usage and throughput by means of three design parameters transparent to the user. Furthermore, it is possible to select between high accuracy or throughput dynamically during runtime. BinArray has been optimized at the register transfer level and operates at 400 MHz as instruction-set processor within a heterogenous XC7Z045-2 FPGA-SoC platform. Experimental results show that BinArray scales to match the performance of other accelerators like EdgeTPU [2] for different network sizes. Even for the largest MobileNet only 50% of the target device and only 96 DSP blocks are utilized.
High Bandwidth Memory (HBM) provides massive aggregated memory bandwidth by exposing multiple memory channels to the processing units. To achieve high performance, an accelerator built on top of an FPGA configured with HBM (i.e., FPGA-HBM platform) n
eeds to scale its performance according to the available memory channels. In this paper, we propose an accelerator for BFS (Breadth-First Search) algorithm, named as ScalaBFS, that builds multiple processing elements to sufficiently exploit the high bandwidth of HBM to improve efficiency. We implement the prototype system of ScalaBFS and conduct BFS in both real-world and synthetic scale-free graphs on Xilinx Alveo U280 FPGA card real hardware. The experimental results show that ScalaBFS scales its performance almost linearly according to the available memory pseudo channels (PCs) from the HBM2 subsystem of U280. By fully using the 32 PCs and building 64 processing elements (PEs) on U280, ScalaBFS achieves a performance up to 19.7 GTEPS (Giga Traversed Edges Per Second). When conducting BFS in sparse real-world graphs, ScalaBFS achieves equivalent GTEPS to Gunrock running on the state-of-art Nvidia V100 GPU that features 64-PC HBM2 (twice memory bandwidth than U280).
There are numerous approaches to building analysis applications across the high-energy physics community. Among them are Python-based, or at least Python-driven, analysis workflows. We aim to ease the adoption of a Python-based analysis toolkit by ma
king it easier for non-expert users to gain access to Python tools for scientific analysis. Experimental software distributions and individual user analysis have quite different requirements. Distributions tend to worry most about stability, usability and reproducibility, while the users usually strive to be fast and nimble. We discuss how we built and now maintain a python distribution for analysis while satisfying requirements both a large software distribution (in our case, that of CMSSW) and user, or laptop, level analysis. We pursued the integration of tools used by the broader data science community as well as HEP developed (e.g., histogrammar, root_numpy) Python packages. We discuss concepts we investigated for package integration and testing, as well as issues we encountered through this process. Distribution and platform support are important topics. We discuss our approach and progress towards a sustainable infrastructure for supporting this Python stack for the CMS user community and for the broader HEP user community.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
