A compact HTS cable that is able to carry large current density is crucial for developing high field accelerator magnets. We are reporting a novel HTS cable (named X-cable) that could achieve a high current density as the Roebel cable, but is impleme
nted by in-plane bending stacked HTS tapes directly to realize the transposition. The cable is jointly developed with an industrial company on a production line: ready for large scale production from the beginning. Recently, a prototype cable with REBCO coated conductor has been successfully fabricated. Test results show no significant degradation, demonstrated the feasibility of such cable concept. In this paper, the cables design concept, in-plane bending performance of the REBCO tapes, fabrication procedure and test results of this first prototype cable will be presented.
Quite a few algorithms have been proposed to optimize the transmission performance of Multipath TCP (MPTCP). However, existing MPTCP protocols are still far from satisfactory in lossy and ever-changing networks because of their loss-based congestion
control and the difficulty of managing multiple subflows. Recently, a congestion-based congestion control, BBR, is proposed to promote TCP transmission performance through better use of bandwidth. Due to the superior performance of BBR, we try to boost MPTCP with it. For this propose, coupled congestion control should be redesigned for MPTCP, and a functional scheduler able to effectively make use of the characteristics of BBR must also be developed for better performance. In this paper, we first propose Coupled BBR as a coupled congestion control algorithm for MPTCP to achieve high throughput and stable sending rate in lossy network scenarios with guaranteed fairness with TCP BBR flows and balanced congestion. Then, to further improve the performance, we propose an Adaptively Redundant and Packet-by-Packet (AR&P) scheduler, which includes two scheduling methods to improve adaptability in highly dynamic network scenarios and keep in-order packet delivery in asymmetric networks. Based on Linux kernel implementation and experiments in both testbed and real network scenarios, we show that the proposed scheme not only provides higher throughput, but also improves robustness and reduces out-of-order packets in some harsh circumstances.
High-temperature electrolysis (HTE) is a promising technology for achieving high-efficiency power-to-gas, which mitigates the renewable curtailment by transforming wind or solar energy into fuels. Different from low-temperature electrolysis, a consid
erable amount of the input energy is consumed by auxiliaries in an HTE system for maintaining the temperature, so the studies on systematic description and parameter optimization of HTE are essentially required. A few published studies investigated HTEs systematic optimization based on simulation, yet there is not a commonly used analytical optimization model which is more suitable for integration with power grid. To fill in this blank, a concise analytical operation model is proposed in this paper to coordinate the necessary power consumptions of auxiliaries under various loading conditions of an HTE system. First, this paper develops a comprehensive energy flow model for an HTE system based on the fundamentals extracted from the existing work, providing a quantitative description of the impacts of condition parameters, including the temperature and the feedstock flow rates. A concise operation model is then analytically proposed to search for the optimal operating states that maximize the hydrogen yield while meeting the desired system loading power by coordinating the temperature, the feedstock flows and the electrolysis current. The evaluation of system performance and the consideration of constraints caused by energy balances and necessary stack requirements are both included. In addition, analytical optimality conditions are obtained to locate the optimal states without performing nonlinear programming by further investigating the optimization method. A numerical case of an HTE system is employed to validate the proposed operation model, which proves to not only improve the conversion efficiency but also enlarge the system load range.
Power-to-gas (P2G) can be employed to balance renewable generation because of its feasibility to operate at fluctuating loading power. The fluctuating operation of low-temperature P2G loads can be achieved by controlling the electrolysis current alon
e. However, this method does not apply to high-temperature P2G (HT-P2G) technology with auxiliary parameters such as temperature and feed rates: Such parameters need simultaneous coordination with current due to their great impact on conversion efficiency. To improve the system performance of HT-P2G while tracking the dynamic power input, this paper proposes a maximum production point tracking (MPPT) strategy and coordinates the current, temperature and feed rates together. In addition, a comprehensive dynamic model of an HT-P2G plant is established to test the performance of the proposed MPPT strategy, which is absent in previous studies that focused on steady states. The case study suggests that the MPPT operation responds to the external load command rapidly even though the internal transition and stabilization cost a few minutes. Moreover, the conversion efficiency and available loading capacity are both improved, which is definitely beneficial in the long run.
