Optical injection and detection of charge currents can complement conventional transport and photoemission measurements without the necessity of invasive contact that may disturb the system being examined. This is a particular concern for the surface
states of a topological insulator. In this work one- and two-color sources of photocurrents are examined in epitaxial, thin films of Bi2Se3. We demonstrate that optical excitation and terahertz detection simultaneously captures one- and two- color photocurrent contributions, as previously not required in other material systems. A method is devised to isolate the two components, and in doing so each can be related to surface or bulk excitations through symmetry. This strategy allows surface states to be examined in a model system, where they have independently been verified with angle-resolved photoemission spectroscopy.
Collinear phase-matched optical rectification is studied in ZnGeP$_{2}$ pumped with near-infrared light. The pump-intensity dependence is presented for three crystal lengths (0.3, 1.0 and 3.0 mm) to determine the effects of linear optical absorption,
nonlinear optical absorption and terahertz free-carrier absorption on the generation. Critical parameters such as the coherence length (for velocity matching), dispersion length (for linear pulse broadening) and nonlinear length (for self-phase modulation) are determined for this material. These parameters provide insight into the upper limit of pulse intensity and crystal length required to generate intense terahertz pulse without detriment to the pulse shape. It is found that for 1-mm thick ZnGeP$_{2}$(012), pumped at 1.28 micron with intensity of ~15 GW/cm2 will produce intense undistorted pulses, whereas longer crystals or larger intensities modify the pulse shape to varying degrees. Moreover, phase-matching dispersion maps are presented for the terahertz generation over a large tuning range (1.1-2.4 micron) in longer (3 mm) crystal, demonstrating the phase-matching bandwidth and phase mismatch that leads to fringing associated with multi-pulse interference. All observed results are simulated numerically showing good qualitative agreement.
We propose the use of a silicon-core optical fiber for terahertz (THz) waveguide applications. Finite-difference time-domain simulations have been performed based on a cylindrical waveguide with a silicon core and silica cladding. High-resistivity si
licon has a flat dispersion over a 0.1 - 3 THz range, making it viable for propagation of tunable narrowband CW THz and possibly broadband picosecond pules of THz radiation. Simulations show the propagation dynamics and the integrated intensity, from which transverse mode profiles and absorption lengths are extraced. It is found that for 140 - 250 micron core diameters the mode is primarily confined to the core, such that the overall absorbance is only slightly less than in bulk polycrystalline silicon.
