The dust properties in the Large and Small Magellanic Clouds are studied using the HERITAGE Herschel Key Project photometric data in five bands from 100 to 500 micron. Three simple models of dust emission were fit to the observations: a single temper
ature blackbody modified by a power- law emissivity (SMBB), a single temperature blackbody modified by a broken power-law emissivity (BEMBB), and two blackbodies with different temperatures, both modified by the same power-law emissivity (TTMBB). Using these models we investigate the origin of the submm excess; defined as the submillimeter (submm) emission above that expected from SMBB models fit to observations < 200 micron. We find that the BEMBB model produces the lowest fit residuals with pixel-averaged 500 micron submm excesses of 27% and 43% for the LMC and SMC, respectively. Adopting gas masses from previous works, the gas-to-dust ratios calculated from our the fitting results shows that the TTMBB fits require significantly more dust than are available even if all the metals present in the interstellar medium (ISM) were condensed into dust. This indicates that the submm excess is more likely to be due to emissivity variations than a second population of colder dust. We derive integrated dust masses of (7.3 +/- 1.7) x 10^5 and (8.3 +/- 2.1) times 10^4 M(sun) for the LMC and SMC, respectively. We find significant correlations between the submm excess and other dust properties; further work is needed to determine the relative contributions of fitting noise and ISM physics to the correlations.
The Small Magellanic Cloud (SMC) provides a unique laboratory for the study of the lifecycle of dust given its low metallicity (~1/5 solar) and relative proximity (~60 kpc). This motivated the SAGE-SMC (Surveying the Agents of Galaxy Evolution in the
Tidally-Stripped, Low Metallicity Small Magellanic Cloud) Spitzer Legacy program with the specific goals of studying the amount and type of dust in the present interstellar medium, the sources of dust in the winds of evolved stars, and how much dust is consumed in star formation. This program mapped the full SMC (30 sq. deg.) including the Body, Wing, and Tail in 7 bands from 3.6 to 160 micron using the IRAC and MIPS instruments on the Spitzer Space Telescope. The data were reduced, mosaicked, and the point sources measured using customized routines specific for large surveys. We have made the resulting mosaics and point source catalogs available to the community. The infrared colors of the SMC are compared to those of other nearby galaxies and the 8 micron/24 micron ratio is somewhat lower and the 70 micron/160 micron ratio is somewhat higher than the average. The global infrared spectral energy distribution shows that the SMC has ~3X lower aromatic emission/PAH (polycyclic aromatic hydrocarbon) abundances compared to most nearby galaxies. Infrared color-magnitude diagrams are given illustrating the distribution of different asymptotic giant branch stars and the locations of young stellar objects. Finally, the average spectral energy distribution (SED) of HII/star formation regions is compared to the equivalent Large Magellanic Cloud average HII/star formation region SED. These preliminary results are expanded in detail in companion papers.
The absolute flux calibration of the James Webb Space Telescope will be based on a set of stars observed by the Hubble and Spitzer Space Telescopes. In order to cross-calibrate the two facilities, several A, G, and white dwarf (WD) stars are observed
with both Spitzer and Hubble and are the prototypes for a set of JWST calibration standards. The flux calibration constants for the four Spitzer IRAC bands 1-4 are derived from these stars and are 2.3, 1.9, 2.0, and 0.5% lower than the official cold-mission IRAC calibration of Reach et al. (2005), i.e. in agreement within their estimated errors of ~2%. The causes of these differences lie primarily in the IRAC data reduction and secondarily in the SEDs of our standard stars. The independent IRAC 8 micron band-4 fluxes of Rieke et al. (2008) are about 1.5 +/- 2% higher than those of Reach et al. and are also in agreement with our 8 micron result.
The properties of the dust grains (e.g., temperature and mass) can be derived from fitting far-IR SEDs (>100 micron). Only with SPIRE on Herschel has it been possible to get high spatial resolution at 200 to 500 micron that is beyond the peak (~160 m
icron) of dust emission in most galaxies. We investigate the differences in the fitted dust temperatures and masses determined using only <200 micron data and then also including >200 micron data (new SPIRE observations) to determine how important having >200 micron data is for deriving these dust properties. We fit the 100 to 350 micron observations of the Large Magellanic Cloud (LMC) point-by-point with a model that consists of a single temperature and fixed emissivity law. The data used are existing observations at 100 and 160 micron (from IRAS and Spitzer) and new SPIRE observations of 1/4 of the LMC observed for the HERITAGE Key Project as part of the Herschel Science Demonstration phase. The dust temperatures and masses computed using only 100 and 160 micron data can differ by up to 10% and 36%, respectively, from those that also include the SPIRE 250 & 350 micron data. We find that an emissivity law proportional to lambda^-1.5 minimizes the 100-350 micron fractional residuals. We find that the emission at 500 micron is ~10% higher than expected from extrapolating the fits made at shorter wavelengths. We find the fractional 500 micron excess is weakly anti-correlated with MIPS 24 micron flux and the total gas surface density. This argues against a flux calibration error as the origin of the 500 micron excess. Our results do not allow us to distinguish between a systematic variation in the wavelength dependent emissivity law or a population of very cold dust only detectable at lambda > 500 micron for the origin of the 500 micron excess.
HII regions are the birth places of stars, and as such they provide the best measure of current star formation rates (SFRs) in galaxies. The close proximity of the Magellanic Clouds allows us to probe the nature of these star forming regions at small
spatial scales. We aim to determine the monochromatic IR band that most accurately traces the bolometric IR flux (TIR), which can then be used to estimate an obscured SFR. We present the spatial analysis, via aperture/annulus photometry, of 16 LMC and 16 SMC HII region complexes using the Spitzer IRAC and MIPS bands. UV rocket data and SHASSA H-alpha data are also included. We find that nearly all of the LMC and SMC HII region SEDs peak around 70um, from ~10 to ~400 pc from the central sources. As a result, the sizes of HII regions as probed by 70um is approximately equal to the sizes as probed by TIR (about 70 pc in radius); the radial profile of the 70um flux, normalized by TIR, is constant at all radii (70um ~ 0.45 TIR); the 1-sigma standard deviation of the 70um fluxes, normalized by TIR, is a lower fraction of the mean (0.05 to 0.12 out to ~220 pc) than the normalized 8, 24, and 160um normalized fluxes (0.12 to 0.52); and these results are invariant between the LMC and SMC. From these results, we argue that 70um is the most suitable IR band to use as a monochromatic obscured star formation indicator because it most accurately reproduces the TIR of HII regions in the LMC and SMC and over large spatial scales. We also explore the general trends of the 8, 24, 70, and 160um bands in the LMC and SMC HII region SEDs, radial surface brightness profiles, sizes, and normalized (by TIR) radial flux profiles. We derive an obscured SFR equation that is modified from the literature to use 70um luminosity, SFR(Mo/yr) = 9.7(0.7)x10^{-44} L(70)(ergs/s), which is applicable from 10 to 300 pc distance from the center of an HII region.
[abridged] We present 52-93 micron spectra obtained with Spitzer in the MIPS-SED mode, of a representative sample of luminous compact far-IR sources in the LMC. These include carbon stars, OH/IR AGB stars, post-AGB objects and PNe, RCrB-type star HV2
671, OH/IR red supergiants WOHG064 and IRAS05280-6910, B[e] stars IRAS04530-6916, R66 and R126, Wolf-Rayet star Brey3a, Luminous Blue Variable R71, supernova remnant N49, a large number of young stellar objects, compact HII regions and molecular cores, and a background galaxy (z~0.175). We use the spectra to constrain the presence and temperature of cold dust and the excitation conditions and shocks within the neutral and ionized gas, in the circumstellar environments and interfaces with the surrounding ISM. Evolved stars, including LBV R71, lack cold dust except in some cases where we argue that this is swept-up ISM. This leads to an estimate of the duration of the prolific dust-producing phase (superwind) of several thousand years for both RSGs and massive AGB stars, with a similar fractional mass loss experienced despite the different masses. We tentatively detect line emission from neutral oxygen in the extreme RSG WOHG064, with implications for the wind driving. In N49, the shock between the supernova ejecta and ISM is revealed by its strong [OI] 63-micron emission and possibly water vapour; we estimate that 0.2 Msun of ISM dust was swept up. Some of the compact HII regions display pronounced [OIII] 88-micron emission. The efficiency of photo-electric heating in the interfaces of ionized gas and molecular clouds is estimated at 0.1-0.3%. We confirm earlier indications of a low nitrogen content in the LMC. Evidence for solid state emission features is found in both young and evolved object; some of the YSOs are found to contain crystalline water ice.
We present a sample of 75 extinction curves derived from FUSE far-ultraviolet spectra supplemented by existing IUE spectra. The extinction curves were created using the standard pair method based on a new set of dereddened FUSE+IUE comparison stars.
Molecular hydrogen absorption features were removed using individualized H_2 models for each sightline. The general shape of the FUSE extinction (8.4 micron^-1 < lambda^-1 < 11 micron^-1) was found to be broadly consistent with extrapolations from the IUE extinction (3.3 micron-1 < lambda^-1 < 8.6 micron^-1) curve. Significant differences were seen in the strength of the far-UV rise and the width of the 2175 A bump. All the FUSE+IUE extinction curves had positive far-UV slopes giving no indication that the far-UV rise was turning over at the shortest wavelengths. The dependence of A(lambda)/A(V) versus R(V)^-1 in the far-UV using the sightlines in our sample was found to be stronger than tentatively indicated by previous work. We present an updated R(V) dependent relationship for the full UV wavelength range (3.3 micron^-1 <= lambda^-1 <= 11 micron^-1). Finally, we searched for discrete absorption features in the far-ultraviolet. We found a 3 sigma upper limit of ~0.12 A(V) on features with a resolution of 250 (~4 A width) and 3 sigma upper limits of ~0.15 A(V) for lambda^-1 < 9.6 micron^-1 and ~0.68 A(V) for lambda^-1 > 9.6 micron^-1 on features with a resolution of 10^4 (~0.1 A width).
The Tail region of the Small Magellanic Cloud (SMC) was imaged using the MIPS instrument on the Spitzer Space Telescope as part of the SAGE-SMC Spitzer Legacy. Diffuse infrared emission from dust was detected in all the MIPS bands. The Tail gas-to-du
st ratio was measured to be 1200 +/- 350 using the MIPS observations combined with existing IRAS and HI observations. This gas-to-dust ratio is higher than the expected 500-800 from the known Tail metallicity indicating possible destruction of dust grains. Two cluster regions in the Tail were resolved into multiple sources in the MIPS observations and local gas-to-dust ratios were measured to be ~440 and ~250 suggests dust formation and/or significant amounts of ionized gas in these regions. These results support the interpretation that the SMC Tail is a tidal tail recently stripped from the SMC that includes gas, dust, and young stars.
We describe the absolute calibration of the Multiband Imaging Photometer for Spitzer (MIPS) 160 micron channel. After the on-orbit discovery of a near-IR ghost image that dominates the signal for sources hotter than about 2000 K, we adopted a strateg
y utilizing asteroids to transfer the absolute calibrations of the MIPS 24 and 70 micron channels to the 160 micron channel. Near-simultaneous observations at all three wavelengths are taken, and photometry at the two shorter wavelengths is fit using the Standard Thermal Model. The 160 micron flux density is predicted from those fits and compared with the observed 160 micron signal to derive the conversion from instrumental units to surface brightness. The calibration factor we derive is 41.7 MJy/sr/MIPS160 (MIPS160 being the instrumental units). The scatter in the individual measurements of the calibration factor, as well as an assesment of the external uncertainties inherent in the calibration, lead us to adopt an uncertainty of 5.0 MJy/sr/MIPS160 (12%) for the absolute uncertainty on the 160 micron flux density of a particular source as determined from a single measurement. For sources brighter than about 2 Jy, non-linearity in the response of the 160 micron detectors produces an under-estimate of the flux density: for objects as bright as 4 Jy, measured flux densities are likely to be ~20% too low. This calibration has been checked against that of ISO (using ULIRGS) and IRAS (using IRAS-derived diameters), and is consistent with those at the 5% level.
The absolute calibration and characterization of the Multiband Imaging Photometer for Spitzer (MIPS) 70 micron coarse- and fine-scale imaging modes are presented based on over 2.5 years of observations. Accurate photometry (especially for faint sourc
es) requires two simple processing steps beyond the standard data reduction to remove long-term detector transients. Point spread function (PSF) fitting photometry is found to give more accurate flux densities than aperture photometry. Based on the PSF fitting photometry, the calibration factor shows no strong trend with flux density, background, spectral type, exposure time, or time since anneals. The coarse-scale calibration sample includes observations of stars with flux densities from 22 mJy to 17 Jy, on backgrounds from 4 to 26 MJy sr^-1, and with spectral types from B to M. The coarse-scale calibration is 702 +/- 35 MJy sr^-1 MIPS70^-1 (5% uncertainty) and is based on measurements of 66 stars. The instrumental units of the MIPS 70 micron coarse- and fine-scale imaging modes are called MIPS70 and MIPS70F, respectively. The photometric repeatability is calculated to be 4.5% from two stars measured during every MIPS campaign and includes variations on all time scales probed. The preliminary fine-scale calibration factor is 2894 +/- 294 MJy sr^-1 MIPS70F^-1 (10% uncertainty) based on 10 stars. The uncertainty in the coarse- and fine-scale calibration factors are dominated by the 4.5% photometric repeatability and the small sample size, respectively. The 5-sigma, 500 s sensitivity of the coarse-scale observations is 6-8 mJy. This work shows that the MIPS 70 micron array produces accurate, well calibrated photometry and validates the MIPS 70 micron operating strategy, especially the use of frequent stimulator flashes to track the changing responsivities of the Ge:Ga detectors.
