The recent development of high-altitude platforms (HAPs) has attracted increasing attention since they can serve as a promising communication method to assist satellite-terrestrial networks. In this paper, we consider an integrated three-layer satell
ite-HAP-terrestrial network where the HAP support dual-band connectivity. Specifically, the HAP can not only communicate with terrestrial users over C-band directly, but also provide backhaul services to terrestrial user terminals over Ka-band. We formulate a sum-rate maximization problem and then propose a fractional programming based algorithm to solve the problem by optimizing the bandwidth and power allocation iteratively. The closed-form optimal solutions for bandwidth allocation and power allocation in each iteration are also derived. Simulation results show the capacity enhancement brought by the dual-band connectivity of the HAP. The influence of the power of the HAP and the power of the satellite is also discussed.
Indoor wireless simultaneous localization and mapping (SLAM) is considered as a promising technique to provide positioning services in future 6G systems. However, the accuracy of traditional wireless SLAM system heavily relies on the quality of propa
gation paths, which is limited by the uncontrollable wireless environment. In this paper, we propose a novel SLAM system assisted by a reconfigurable intelligent surface (RIS) to address this issue. By configuring the phase shifts of the RIS, the strength of received signals can be enhanced to resist the disturbance of noise. However, the selection of phase shifts heavily influences the localization and mapping phase, which makes the design very challenging. To tackle this challenge, we formulate the RIS-assisted indoor SLAM optimization problem and design an error minimization algorithm for it. Simulations show that the RIS assisted SLAM system can decrease the positioning error by at least 31% compared with benchmark schemes.
In the coming 6G communications, the internet of things (IoT) serves as a key enabler to collect environmental information and is expected to achieve ubiquitous deployment. However, it is challenging for traditional IoT sensors to meet this demand be
cause of their requirement of power supplies and frequent maintenance, which is due to their sense-then-transmit working principle. To address this challenge, we propose a meta-IoT sensing system, where the IoT sensors are based on specially designed meta-materials. The meta-IoT sensors achieve simultaneous sensing and transmission and thus require no power supplies. In order to design a meta-IoT sensing system with optimal sensing accuracy, we jointly consider the sensing and transmission of meta-IoT sensors and propose an efficient algorithm to jointly optimizes the meta-IoT structure and the sensing function at the receiver of the system. As an example, we apply the proposed system and algorithm in sensing environmental temperature and humidity levels. Simulation results show that by using the proposed algorithm, the sensing accuracy can be significantly increased.
The recent development of metasurfaces has motivated their potential use for improving the performance of wireless communication networks by manipulating the propagation environment through nearly-passive sub-wavelength scattering elements arranged o
n a surface. However, most studies of this technology focus on reflective metasurfaces, i.e., the surface reflects the incident signals towards receivers located on the same side of the transmitter, which restricts the coverage to one side of the surface. In this article, we introduce the concept of intelligent omni-surface (IOS), which is able to serve mobile users on both sides of the surface to achieve full-dimensional communications by jointly engineering its reflective and refractive properties. The working principle of the IOS is introduced and a novel hybrid beamforming scheme is proposed for IOS-based wireless communications. Moreover, we present a prototype of IOS-based wireless communications and report experimental results. Furthermore, potential applications of the IOS to wireless communications together with relevant research challenges are discussed.
In this paper, we consider a single-cell multi-user orthogonal frequency division multiple access (OFDMA) network with one unmanned aerial vehicle (UAV), which works as an amplify-and-forward relay to improve the quality-of-service (QoS) of the user
equipments (UEs) in the cell edge. Aiming to improve the throughput while guaranteeing the user fairness, we jointly optimize the communication mode, subchannel allocation, power allocation, and UAV trajectory, which is an NP-hard problem. To design the UAV trajectory and resource allocation efficiently, we first decompose the problem into three subproblems, i.e., mode selection and subchannel allocation, trajectory optimization, and power allocation, and then solve these subproblems iteratively. Simulation results show that the proposed algorithm outperforms the random algorithm and the cellular scheme.
Reconfigurable intelligent surfaces (RISs) have attracted wide interest from industry and academia since they can shape the wireless environment into a desirable form with a low cost. In practice, RISs have three types of implementations: 1) reflecti
ve, where signals can be reflected to the users on the same side of the base station (BS), 2) transmissive, where signals can penetrate the RIS to serve the users on the opposite side of the BS, and 3) hybrid, where the RISs have a dual function of reflection and transmission. However, existing works focus on the reflective type RISs, and the other two types of RISs are not well investigated. In this letter, a downlink multi-user RIS-assisted communication network is considered, where the RIS can be one of these types. We derive the system sum-rate, and discuss which type can yield the best performance under a specific user distribution. Numerical results verify our analysis.
The received signal strength (RSS) based technique is extensively utilized for localization in the indoor environments. Since the RSS values of neighboring locations may be similar, the localization accuracy of the RSS based technique is limited. To
tackle this problem, in this paper, we propose to utilize reconfigurable intelligent surface (RIS) for the RSS based multi-user localization. As the RIS is able to customize the radio channels by adjusting the phase shifts of the signals reflected at the surface, the localization accuracy in the RIS aided scheme can be improved by choosing the proper phase shifts with significant differences of RSS values among adjacent locations. However, it is challenging to select the optimal phase shifts because the decision function for location estimation and the phase shifts are coupled. To tackle this challenge, we formulate the optimization problem for the RIS-aided localization, derive the optimal decision function, and design the phase shift optimization (PSO) algorithm to solve the formulated problem efficiently. Analysis of the proposed RIS aided technique is provided, and the effectiveness is validated through simulation.
The received signal strength (RSS) based technique is widely utilized for ubiquitous positioning due to its advantage of simple implementability. However, its accuracy is limited because the RSS values of adjacent locations can be very difficult to d
istinguish. Against this background, we propose the novel RSS-based positioning scheme enabled by reconfigurable intelligent surface (RIS). By modifying the reflection coefficient of the RIS, the propagation channels are programmed in such a way that the differences between the RSS values of adjacent locations can be enlarged to improve the positioning accuracy. New challenge lies in the selection of suitable reflection coefficients for high-accuracy positioning. To tackle this challenge, we formulate the RIS-aided positioning problem and design an iterative algorithm to solve the problem. The effectiveness of the proposed positioning scheme is validated through simulations.
