Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInvestigating the Thixotropic Behaviour of Tremie Concrete Using the Slump-flow Test and the Material Point Method
61
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A new thixotropic model is developed integrating the Papanastasiou-Bingham model with thixotropy equations to simulate the flow behaviour of Tremie Concrete in the Material Point Method framework. The effect of thixotropy on the rheological behaviour of fresh concrete is investigated by comparing field measurements with numerical simulations. The comparison yields new insights into a critical and often overlooked behaviour of concrete. A parametric study is performed to understand the effect of model parameters and rest-time on the shear stress response of fresh concrete. The Material Point Method with the Papanastasiou-Bingham model reproduces slump-flow measurements observed in the field. The novel model revealed a decline in concrete workability during the Slump-flow test after a period of rest due to thixotropy, which the physical version of the test fails to capture. This reduction in workability significantly affects the flow behaviour and the effective use of fresh concrete in construction operation.
rate research
Read More
In this paper, we describe a new scalable and modular material point method (MPM) code developed for solving large-scale problems in continuum mechanics. The MPM is a hybrid Eulerian-Lagrangian approach, which uses both moving material points and computational nodes on a background mesh. The MPM has been successfully applied to solve large-deformation problems such as landslides, failure of slopes, concrete flows, etc. Solving these large-deformation problems result in the material points actively moving through the mesh. Developing an efficient parallelisation scheme for the MPM code requires dynamic load-balancing techniques for both the material points and the background mesh. This paper describes the data structures and algorithms employed to improve the performance and portability of the MPM code. An object-oriented programming paradigm is adopted to modularise the MPM code. The Unified Modelling Language (UML) diagram of the MPM code structure is shown in Figure 1.
Visualizing regional-scale landslides is the key to conveying the threat of natural hazards to stakeholders and policymakers. Traditional visualization techniques are restricted to post-processing a limited subset of simulation data and are not scalable to rendering exascale models with billions of particles. In-situ visualization is a technique of rendering simulation data in real-time, i.e., rendering visuals in tandem while the simulation is running. In this study, we develop a scalable N:M interface architecture to visualize regional-scale landslides. We demonstrate the scalability of the architecture by simulating the long runout of the 2014 Oso landslide using the Material Point Method coupled with the Galaxy ray tracing engine rendering 4.2 million material points as spheres. In-situ visualization has an amortized runtime increase of 2% compared to non-visualized simulations. The developed approach can achieve in-situ visualization of regional-scale landslides with billions of particles with minimal impact on the simulation process.
Two methods for solid body representation in flow simulations available in the Pencil Code are the immersed boundary method and overset grids. These methods are quite different in terms of computational cost, flexibility and numerical accuracy. We present here an investigation of the use of the different methods with the purpose of assessing their strengths and weaknesses. At present, the overset grid method in the Pencil Code can only be used for representing cylinders in the flow. For this task it surpasses the immersed boundary method in yielding highly accurate solutions at moderate computational costs. This is partly due to local grid stretching and a body-conformal grid, and partly due to the possibility of working with local time step restrictions on different grids. The immersed boundary method makes up the lack of computational efficiency with flexibility in regards to application to complex geometries, due to a recent extension of the method that allows our implementation of it to represent arbitrarily shaped objects in the flow.
A reactive fluid dissolving the surrounding rock matrix can trigger an instability in the dissolution front, leading to spontaneous formation of pronounced channels or wormholes. Theoretical investigations of this instability have typically focused on a steadily propagating dissolution front that separates regions of high and low porosity. In this paper we show that this is not the only possible dissolutional instability in porous rocks; there is another instability that operates instantaneously on any initial porosity field, including an entirely uniform one. The relative importance of the two mechanisms depends on the ratio of the porosity increase to the initial porosity. We show that the inlet instability is likely to be important in limestone formations where the initial porosity is small and there is the possibility of a large increase in permeability. In quartz-rich sandstones, where the proportion of easily soluble material (e.g. carbonate cements) is small, the instability in the steady-state equations is dominant.
Hazardous tsunamis are known to be generated predominantly at subduction zones by large earthquakes on dip (vertical)-slip faults. However, a moment magnitude ($M_{w}$) 7.5 earthquake on a strike (lateral)-slip fault in Sulawesi (Indonesia) in 2018 generated a tsunami that devastated the city of Palu. The mechanism by which this large tsunami originated from a strike-slip earthquake has been debated. Here we present near-field ground motion data from a GPS station that confirms that the 2018 Palu earthquake attained supershear speed, i.e., a rupture speed greater than the speed of shear waves in the host medium. We study the effect of this supershear rupture on tsunami generation by coupling the ground motion to a 1D non-linear shallow-water wave model that accounts for both the time-dependent bathymetric displacement and velocity. With the local bathymetric profile of the Palu bay around a tidal gauge, we find that these simulations reproduce the tsunami motions measured by the gauge, with only minimal tuning of parameters. We conclude that Mach (shock) fronts, generated by the supershear speed of the earthquake, interacted with the bathymetry and contributed to the tsunami. This suggests that rupture speed should be considered in tsunami hazard assessments.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
