Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTransparent and flexible high-power supercapacitor based on carbon nanotube fibre aerogels
116
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work, we report on the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas phase. The supercapacitors combine record power density of $1370 kW kg^{-1}$ at high transmittance ($ca. 70%$), high electrochemical stability during extended cycling ($>94%$ capacitance retention over $20 000 cycles$) as well as against repeated $180{deg}$ flexural deformation. They represent a significant enhancement of 1-3 orders of magnitude compared to the prior-art transparent supercapacitors based on graphene, CNTs, and rGO. These features mainly arise from the exceptionally long length of the CNTs, which makes the material behave as a bulk conductor instead of an aspect ratio-limited percolating network, even for electrodes with $>90%$ transparency. The electrical and capacitive figures-of-merit for the transparent conductor are $FoMe = 2.7$, and $FoMc = 0.46 F S^{-1} cm^{-2}$ respectively
rate research
Read More
We report on the nano-electron beam assisted fabrication of atomically sharp iron-based tips and on the creation of a nano-soldering iron for nano-interconnects using Fe-filled multiwalled carbon nanotubes (MWCNTs). High energy electron beam machining has been proven a powerful tool to modify desired nanostructures for technological applications and to form molecular junctions and interconnections between carbon nanotubes. Recent studies showed the high degree of complexity in the creation of direct interconnections between multiwalled and CNTs having dissimilar diameters. Our technique allows for carving a MWCNT into a nanosoldering iron that was demonstrated capable of joining two separated halves of a tube. This approach could easily be extended to the interconnection of two largely dissimilar CNTs, between a CNT and a nanowire or between two nanowires.
We report that 30-inch scale multiple roll-to-roll transfer and wet chemical doping considerably enhance the electrical properties of the graphene films grown on roll-type Cu substrates by chemical vapor deposition. The resulting graphene films shows a sheet resistance as low as ~30 Ohm/sq at ~90 % transparency which is superior to commercial transparent electrodes such as indium tin oxides (ITO). The monolayer of graphene shows sheet resistances as low as ~125 Ohm/sq with 97.4% optical transmittance and half-integer quantum Hall effect, indicating the high-quality of these graphene films. As a practical application, we also fabricated a touch screen panel device based on the graphene transparent electrodes, showing extraordinary mechanical and electrical performances.
Single-walled carbon nanotube (SWCNT) films are promising materials for transparent conductive films (TCFs) with potential applications in flexible displays, touch screens, solar cells and solid-state lighting1,2. However, further reductions in resistivity and in cost of SWCNT films are necessary for high quality TCF products3. Here, we report an improved floating catalyst chemical vapor deposition method to directly and continuously produce ultrathin and freestanding SWCNT films at the hundred meter-scale. Both carbon conversion efficiency and SWCNT TCF yield are increased by three orders of magnitude relative to the conventional floating catalyst chemical vapor deposition. After doping, the film manifests a sheet resistance of 40 ohm/sq. at 90% transmittance, representing record performance for large-scale SWCNT films. Our work provides a new avenue to accelerate the industrialization of SWCNT films as TCFs.
This article presents novel high speed and low power full adder cells based on carbon nanotube field effect transistor (CNFET). Four full adder cells are proposed in this article. First one (named CN9P4G) and second one (CN9P8GBUFF) utilizes 13 and 17 CNFETs respectively. Third design that we named CN10PFS uses only 10 transistors and is full swing. Finally, CN8P10G uses 18 transistors and divided into two modules, causing Sum and Cout signals are produced in a parallel manner. All inputs have been used straight, without inverting. These designs also used the special feature of CNFET that is controlling the threshold voltage by adjusting the diameters of CNFETs to achieve the best performance and right voltage levels. All simulation performed using Synopsys HSPICE software and the proposed designs are compared to other classical and modern CMOS and CNFET-based full adder cells in terms of delay, power consumption and power delay product.
We describe a film of highly-aligned single-walled carbon nanotubes that acts as an excellent terahertz linear polarizer. There is virtually no attenuation (strong absorption) when the terahertz polarization is perpendicular (parallel) to the nanotube axis. From the data we calculated the reduced linear dichrosim to be 3, corresponding to a nematic order parameter of 1, which demonstrates nearly perfect alignment as well as intrinsically anisotropic terahertz response of single-walled carbon nanotubes in the film.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
