Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userARRAW: Anti-resonant reflecting acoustic waveguides
185
0
0.0
(
0
)
Added by
Miko{\\l}aj Schmidt
Publication date
2019
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Development of acoustic and optoacoustic on-chip technologies calls for new solutions to guiding, storing and interfacing acoustic and optical waves in integrated silicon-on-insulator (SOI) systems. One of the biggest challenges in this field is to suppress the radiative dissipation of the propagating acoustic waves, while co-localizing the optical and acoustic fields in the same region of an integrated waveguide. Here we address this problem by introducing Anti-Resonant Reflecting Acoustic Waveguides (ARRAWs) -- mechanical analogues of the Anti-Resonant Reflecting Optical Waveguides (ARROWs). We discuss the principles of anti-resonant guidance and establish guidelines for designing efficient ARRAWs. Finally, we demonstrate examples of the simplest silicon/silica ARRAW platforms that can simultaneously serve as near-IR optical waveguides, and support strong backward Brillouin scattering.
rate research
Read More
We introduce a new type of states for light in multimode waveguides featuring strongly enhanced or reduced spectral correlations. Based on the experimentally measured multi-spectral transmission matrix of a multimode fiber, we generate a set of states that outperform the established principal modes in terms of the spectral stability of their output spatial field profiles. Inverting this concept also allows us to create states with a minimal spectral correlation width, whose output profiles are considerably more sensitive to a frequency change than typical input wavefronts. The resulting super- and anti-principal modes are made orthogonal to each other even in the presence of mode-dependent loss. By decomposing them in the principal mode basis, we show that the super-principal modes are formed via interference of principal modes with closeby delay times, whereas the anti-principal modes are a superposition of principal modes with the most different delay times available in the fiber. Such novel states are expected to have broad applications in fiber communication, imaging, and spectroscopy.
We report on the analysis of electroabsorption in thin GaAs/Al$_{0.3}$Ga$_{0.7}$As nanophotonic waveguides with an embedded $p$-$i$-$n$ junction. By measuring the transmission through waveguides of different lengths, we derive the propagation loss as a function of electric field, wavelength, and temperature. The results are in good agreement with the Franz-Keldysh model of electroabsorption extending over 200 meV below the GaAs bandgap, i.e. in the 910--970 nm wavelength range. We find a pronounced residual absorption in forward bias, which we attribute to Fermi-level pinning at the waveguide surface, producing over 20 dB/mm loss at room temperature. These results are essential for understanding the origin of loss in nanophotonic devices operating in the emission range of self-assembled InAs semiconductor quantum dots, towards the realization of scalable quantum photonic integrated circuits.
We investigate various methods for extending the simple analytical capillary model to describe the dispersion and loss of anti-resonant hollow-core fibers without the need of detailed finite-element simulations across the desired wavelength range. This poor-mans model can with a single fitting parameter quite accurately mimic dispersion and loss resonances and anti-resonances from full finite-element simulations. Due to the analytical basis of the model it is easy to explore variations in core size and cladding wall thickness, and should therefore provide a valuable tool for numerical simulations of the ultrafast nonlinear dynamics of gas-filled hollow-core fibers.
We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amorphous dielectrics. Considering low-loss Si$_3$N$_4$ waveguides with a standard core cross section of 4.4$times$0.03 $mu$m$^2$ size, buried 8 $mu$m deep in a SiO$_2$ cladding we compare surface acoustic wave generation in various different geometries via a piezo-active, lead zirconate titanate film placed on top of the surface and driven via an interdigitized transducer (IDT). Using numerical solutions of the acoustic and optical wave equations, we determine the strain distribution of the SAW under resonant excitation. From the overlap of the acoustic strain field with the optical mode field we calculate and maximize the attainable amplitude of index modulation in the waveguide. For the example of a near-infrared wavelength of 840 nm, a maximum shift in relative effective refractive index of 0.7x10$^{-3}$ was obtained for TE polarized light, using an IDT period of 30 - 35 $mu$m, a film thickness of 2.5 - 3.5 $mu$m, and an IDT voltage of 10 V. For these parameters, the resonant frequency is in the range 70 - 85 MHz. The maximum shift increases to 1.2x10$^{-3}$, with a corresponding resonant frequency of 87 MHz, when the height of the cladding above the core is reduced to 3 $mu$m. The relative index change is about 300-times higher than in previous work based on non-resonant proximity piezo-actuation, and the modulation frequency is about 200-times higher. Exploiting the maximum relative index change of 1.2$times$10$^{-3}$ in a low-loss balanced Mach-Zehnder modulator should allow full-contrast modulation in devices as short as 120 $mu$m (half-wave voltage length product = 0.24 Vcm).
By extracting the permittivity of monolayer MoS2 from experiments, the optical absorption of monolayer MoS2 prepared on top of one-dimensional photonic crystal (1DPC) or metal films is investigated theoretically. The 1DPC and metal films act as resonant back reflectors that can enhance absorption of monolayer MoS2 substantially over a broad spectral range due to the Fabry-Perot cavity effect. The absorption of monolayer MoS2 can also be tuned by varying either the distance between the monolayer MoS2 and the back reflector or the thickness of the cover layers.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
