Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEffect of substrate topography, material wettability and dielectric thickness on reversible electrowetting
222
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Recent experiments by Kavousanakis et al., Langmuir, 2018 [1], showed that reversible electrowetting on superhydrophobic surfaces can be achieved by using a thick solid dielectric layer (e.g. tens of micrometers). It has also been shown, through equilibrium (static) computations, that when the dielectric layer is thick enough the electrostatic pressure is smoothly distributed along the droplet surface, thus the irreversible Cassie to Wenzel wetting transitions can be prevented. In the present work we perform more realistic, dynamic simulations of the electrostatically-induced spreading on superhydrophobic surfaces. To this end, we employ an efficient numerical scheme which enables us to fully take into account the topography of the solid substrate. We investigate in detail the role of the various characteristics of the substrate (i.e. the dielectric thickness, geometry and material wettability) and present relevant flow maps for the resulting wetting states. Through our dynamic simulations, we identify the conditions under which it is possible to achieve reversible electrowetting. We have found that not only the collapse (Cassie-Baxter to Wenzel) transitions but also the contact angle hysteresis of the substrate significantly affects the reversibility.
rate research
Read More
We examine the impact of quantum confinement on the interaction potential between two charges in two-dimensional semiconductor nanosheets in solution. The resulting effective potential depends on two length scales, namely the thickness $d$ and an emergent length scale $d^* equiv epsilon d / epsilon_{text{sol}}$, where $epsilon$ is the permittivity of the nanosheet and $epsilon_{text{sol}}$ is the permittivity of the solvent. In particular, quantum confinement, and not electrostatics, is responsible for the logarithmic behavior of the effective potential for separations smaller than $d$, instead of the one-over-distance bulk Coulomb interaction. Finally, we corroborate that the exciton binding energy also depends on the two-dimensional exciton Bohr radius $a_0$ in addition to the length scales $d$ and $d^*$ and analyze the consequences of this dependence.
The paper reports on the comparison of the wetting properties of super-hydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and drop impact is shown. From the results, it is evident that when increasing the length and density of NWs: (i) the thresholds for drop impact and EW irreversibility increase (ii) the contact-angle hysteresis after impalement decreases. This suggests that the structure of the NWs network could allow for partial impalement, hence preserving the reversibility, and that EW acts the same way as an external pressure. The most robust of our surfaces show a threshold to impalement higher than 35 kPa, while most of the super-hydrophobic surfaces tested so far have impalement threshold smaller than 10 kPa.
We model the optical visibility of monolayer and bilayer graphene deposited on a silicon/silicon oxide substrate or thermally annealed on the surface of silicon carbide. We consider reflection and transmission setups, and find that visibility is strongest in reflection reaching the optimum conditions when the bare substrate transmits light resonantly. In the optical range of frequencies a bilayer is approximately twice as visible as a monolayer thereby making the two types of graphene distinguishable from each other.
A lattice Boltzmann model was proposed to simulate electrowetting-on-dielectric (EWOD). The insulative vapor and the electrolyte liquid droplet were simulated by the lattice Boltzmann method respectively, and the linear property between cosine of contact angle and the electric field force confirms the reliability of this model. In the simulation of electrolyte flowing in a rough-wall channel under an external electric field, we found that a narrow channel is more sensitive than a broad channel and the flux decreases monotonously as the electric field increase, but may suddenly increase if the electric field is strong enough.
We discuss unreported transitions of oxidized GaAs surfaces between (super)hydrophilic and hydrophobic states when stored in ambient conditions. Contact angles higher than 90deg and high adhesive force were observed for several air-aged epitaxial samples grown under different conditions as well as on epi-ready wafers. Regardless of the morphologies of the surface, superhydrophilicity of oxygen-plasma treated samples was observed, an effect disappearing with storage time. Reproducible hydrophobicity was likewise observed, as expected, after standard HCl surface etching. The relation between surface oxides and hydrophobic/hydrophilic behavior is discussed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
