Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLattice Boltzmann simulation of electrowetting-on-dielectric in a rough-wall channel
195
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A lattice Boltzmann model was proposed to simulate electrowetting-on-dielectric (EWOD). The insulative vapor and the electrolyte liquid droplet were simulated by the lattice Boltzmann method respectively, and the linear property between cosine of contact angle and the electric field force confirms the reliability of this model. In the simulation of electrolyte flowing in a rough-wall channel under an external electric field, we found that a narrow channel is more sensitive than a broad channel and the flux decreases monotonously as the electric field increase, but may suddenly increase if the electric field is strong enough.
rate research
Read More
The direct simulation of the dynamics of second sound in graphitic materials remains a challenging task due to lack of methodology for solving the phonon Boltzmann equation in such a stiff hydrodynamic regime. In this work, we aim to tackle this challenge by developing a multiscale numerical scheme for the transient phonon Boltzmann equation under Callaways dual relaxation model which captures well the collective phonon kinetics. Comparing to traditional numerical methods, the present multiscale scheme is efficient, accurate and stable in all transport regimes attributed to avoiding the use of time and spatial steps smaller than the relaxation time and mean free path of phonons. The formation, propagation and composition of ballistic pulses and second sound in graphene ribbon in two classical paradigms for experimental detection are investigated via the multiscale scheme. The second sound is declared to be mainly contributed by ZA phonon modes, whereas the ballistic pulses are mainly contributed by LA and TA phonon modes. The influence of temperature, isotope abundance and ribbon size on the second sound propagation is also explored. The speed of second sound in the observation window is found to be at most 20 percentages smaller than the theoretical value in hydrodynamic limit due to the finite umklapp, isotope and edge resistive scattering. The present study will contribute to not only the solution methodology of phonon Boltzmann equation, but also the physics of transient hydrodynamic phonon transport as guidance for future experimental detection.
In this paper, a coupling lattice Boltzmann (LB) model for simulating thermal flows on the standard D2Q9 lattice is developed in the framework of the double-distribution-function (DDF) approach in which the viscous heat dissipation and compression work are considered. In the model, a density distribution function is used to simulate the flow field, while a total energy distribution function is employed to simulate the temperature field. The discrete equilibrium density and total energy distribution functions are obtained from the Hermite expansions of the corresponding continuous equilibrium distribution functions. The pressure given by the equation of state of perfect gases is recovered in the macroscopic momentum and energy equations. The coupling between the momentum and energy transports makes the model applicable for general thermal flows such as non-Boussinesq flows, while the existing DDF LB models on standard lattices are usually limited to Boussinesq flows in which the temperature variation is small. Meanwhile, the simple structure and basic advantages of the DDF LB approach are retained. The model is tested by numerical simulations of thermal Couette flow, attenuation-driven acoustic streaming, and natural convection in a square cavity with small and large temperature differences. The numerical results are found to be in good agreement with the analytical solutions and/or other numerical results reported in the literature.
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To alleviate this limitation, we use a vielbein formalism to write down the Boltzmann equation on an arbitrary geometry, and solve the evolution of the fluid distribution functions using a finite difference method. Focussing on the torus geometry as an example of a curved surface, we demonstrate drift motions of fluid droplets and stripes embedded on the surface of a torus. Interestingly, they migrate in opposite directions: fluid droplets to the outer side while fluid stripes to the inner side of the torus. For the latter we demonstrate that the global minimum configuration is unique for small stripe widths, but it becomes bistable for large stripe widths. Our simulations are also in agreement with analytical predictions for the Laplace pressure of the fluid stripes, and their damped oscillatory motion as they approach equilibrium configurations, capturing the corresponding decay timescale and oscillation frequency. Finally, we simulate the coarsening dynamics of phase separating binary fluids in the hydrodynamics and diffusive regimes for tori of various shapes, and compare the results against those for a flat two-dimensional surface. Our lattice Boltzmann scheme can be extended to other surfaces and coupled to other dynamical equations, opening up a vast range of applications involving complex flows on curved geometries.
When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space of central moments (CMs) to enhance numerical stability for high Reynolds numbers. The adopted forcing scheme, consistent with the CMs-based LBM, leads to a concise yet robust algorithm. Furthermore, additional terms required to ensure thermodynamic consistency are derived in a CMs framework. The effectiveness of the present scheme is successfully tested against a series of boiling processes, including nucleation, growth, and departure of a vapor bubble for Reynolds numbers varying between 30 and 30000. Our CMs-based LBM can reproduce all the boiling regimes, i.e., nucleate boiling, transition boiling, and film boiling, without any artificial input such as initial vapor phase. We find that the typical boiling curve, also known as the Nukiyama curve, appears even though the focused system is not the pool boiling but the forced-convection system. Also, our simulations support experimental observations of intermittent direct solid-liquid contact even in the film-boiling regime. Finally, we provide quantitative comparison with the semi-empirical correlations for the forced-convection film boiling on a cylinder on the Nu-Ja diagram.
The goal of this work is to determine classes of traveling solitary wave solutions for Lattice Boltzmann schemes by means of an hyperbolic ansatz. It is shown that spurious solitary waves can occur in finite-difference solutions of nonlinear wave equation. The occurence of such a spurious solitary wave, which exhibits a very long life time, results in a non-vanishing numerical error for arbitrary time in unbounded numerical domain. Such a behavior is referred here to have a structural instability of the scheme, since the space of solutions spanned by the numerical scheme encompasses types of solutions (solitary waves in the present case) that are not solutions of the original continuous equations. This paper extends our previous work about classical schemes to Lattice Boltzmann schemes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
