Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe lunar Askaryan technique: a technical roadmap
72
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The lunar Askaryan technique, which involves searching for Askaryan radio pulses from particle cascades in the outer layers of the Moon, is a method for using the lunar surface as an extremely large detector of ultra-high-energy particles. The high time resolution required to detect these pulses, which have a duration of around a nanosecond, puts this technique in a regime quite different from other forms of radio astronomy, with a unique set of associated technical challenges which have been addressed in a series of experiments by various groups. Implementing the methods and techniques developed by these groups for detecting lunar Askaryan pulses will be important for a future experiment with the Square Kilometre Array (SKA), which is expected to have sufficient sensitivity to allow the first positive detection using this technique. Key issues include correction for ionospheric dispersion, beamforming, efficient triggering, and the exclusion of spurious events from radio-frequency interference. We review the progress in each of these areas, and consider the further progress expected for future application with the SKA.
rate research
Read More
The Lunar Cherenkov technique is a promising method for UHE neutrino and cosmic ray detection which aims to detect nanosecond radio pulses produced during particle interactions in the Lunar regolith. For low frequency experiments, such as NuMoon, the frequency dependent dispersive effect of the ionosphere is an important experimental concern as it reduces the pulse amplitude and subsequent chances of detection. We are continuing to investigate a new method to calibrate the dispersive effect of the ionosphere on lunar Cherenkov pulses via Faraday rotation measurements of the Moons polarised emission combined with geomagnetic field models. We also extend this work to include radio imaging of the Lunar surface, which provides information on the physical and chemical properties of the lunar surface that may affect experimental strategies for the lunar Cherenkov technique.
Lunar Cherenkov experiments aim to detect nanosecond pulses of Cherenkov emission produced during UHE cosmic ray or neutrino interactions in the lunar regolith. Pulses from these interactions are dispersed, and therefore reduced in amplitude, during propagation through the Earths ionosphere. Pulse dispersion must therefore be corrected to maximise the received signal to noise ratio and subsequent chances of detection. The pulse dispersion characteristic may also provide a powerful signature to determine the lunar origin of a pulse and discriminate against pulses of terrestrial radio frequency interference (RFI). This characteristic is parameterised by the instantaneous Total Electron Content (TEC) of the ionosphere and therefore an accurate knowledge of the ionospheric TEC provides an experimental advantage for the detection and identification of lunar Cherenkov pulses. We present a new method to calibrate the dispersive effect of the ionosphere on lunar Cherenkov pulses using lunar Faraday rotation measurements combined with geomagnetic field models.
We describe an experiment using the Parkes radio telescope in the 1.2-1.5 GHz frequency range as part of the LUNASKA project, to search for nanosecond-scale pulses from particle cascades in the Moon, which may be triggered by ultra-high-energy astroparticles. Through the combination of a highly sensitive multi-beam radio receiver, a purpose-built backend and sophisticated signal-processing techniques, we achieve sensitivity to radio pulses with a threshold electric field strength of 0.0053 $mu$V/m/MHz, lower than previous experiments by a factor of three. We observe no pulses in excess of this threshold in observations with an effective duration of 127 hours. The techniques we employ, including compensating for the phase, dispersion and spectrum of the expected pulse, are relevant for future lunar radio experiments.
LOX is a lunar-orbiting astrophysics mission that will probe the cosmos at MeV energies. It is guided by open questions regarding thermonuclear, or Type-Ia, supernovae (SNeIa) and will characterize these inherently radioactive objects by enabling a systematic survey of SNeIa at gamma-ray energies for the first time. Astronomical investigations from lunar orbit afford new opportunities to advance our understanding of the cosmos. The foundation of LOX is an observational approach well suited to the all-sky monitoring demands of supernova investigations and time-domain astronomy. Its inherently wide field-of-view and continuous all-sky monitoring provides an innovative way of addressing decadal survey questions at MeV energies (0.1-10 MeV). The LOX approach achieves high sensitivity with a simple, high-heritage instrument design that eliminates the need for complex, position-sensitive detectors, kinematic event reconstruction, masks, or other insensitive detector mass, while also mitigating technology development, implementation complexity, and their associated costs. LOX can be realized within existing programs, like Explorer.
The use of the Moon as a detector volume for ultra-high-energy neutrinos and cosmic rays, by searching for the Askaryan radio pulse produced when they interact in the lunar regolith, has been attempted by a range of projects over the past two decades. In this contribution, I discuss some of the technical considerations relevant to these experiments, and their consequent sensitivity to ultra-high-energy particles. I also discuss some possible future experiments, and highlight their potential.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
