Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA lunar radio experiment with the Parkes radio telescope for the LUNASKA project
174
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We describe an experiment using the Parkes radio telescope in the 1.2-1.5 GHz frequency range as part of the LUNASKA project, to search for nanosecond-scale pulses from particle cascades in the Moon, which may be triggered by ultra-high-energy astroparticles. Through the combination of a highly sensitive multi-beam radio receiver, a purpose-built backend and sophisticated signal-processing techniques, we achieve sensitivity to radio pulses with a threshold electric field strength of 0.0053 $mu$V/m/MHz, lower than previous experiments by a factor of three. We observe no pulses in excess of this threshold in observations with an effective duration of 127 hours. The techniques we employ, including compensating for the phase, dispersion and spectrum of the expected pulse, are relevant for future lunar radio experiments.
rate research
Read More
The Moon is used as a target volume for ultra-high energy neutrino searches with terrestrial radio telescopes. The LUNASKA project has conducted observations with the Parkes and ATCA telescopes; and, most recently, with both of them in combination. We present an analysis of the data obtained from these searches, including validation and calibration results for the Parkes-ATCA experiment, as well as a summary of prospects for future observations.
We report a limit on the ultra-high-energy neutrino flux based on a non-detection of radio pulses from neutrino-initiated particle cascades in the Moon, in observations with the Parkes radio telescope undertaken as part of the LUNASKA project. Due to the improved sensitivity of these observations, which had an effective duration of 127 hours and a frequency range of 1.2-1.5 GHz, this limit extends to lower neutrino energies than those from previous lunar radio experiments, with a detection threshold below 10^20 eV. The calculation of our limit allows for the possibility of lunar-origin pulses being misidentified as local radio interference, and includes the effect of small-scale lunar surface roughness. The targeting strategy of the observations also allows us to place a directional limit on the neutrino flux from the nearby radio galaxy Centaurus A.
[Abridged] The Sardinia Radio Telescope (SRT) is the new 64-m dish operated by INAF (Italy). Its active surface will allow us to observe at frequencies of up to 116 GHz. At the moment, three receivers, one per focal position, have been installed and tested. The SRT was officially opened in October 2013, upon completion of its technical commissioning phase. In this paper, we provide an overview of the main science drivers for the SRT, describe the main outcomes from the scientific commissioning of the telescope, and discuss a set of observations demonstrating the SRTs scientific capabilities. One of the main objectives of scientific commissioning was the identification of deficiencies in the instrumentation and/or in the telescope sub-systems for further optimization. As a result, the overall telescope performance has been significantly improved. As part of the scientific commissioning activities, different observing modes were tested and validated, and first astronomical observations were carried out to demonstrate the science capabilities of the SRT. In addition, we developed astronomer-oriented software tools, to support future observers on-site. The astronomical validation activities were prioritized based on technical readiness and scientific impact. The highest priority was to make the SRT available for joint observations as part of European networks. As a result, the SRT started to participate (in shared-risk mode) in EVN (European VLBI Network) and LEAP (Large European Array for Pulsars) observing sessions in early 2014. The validation of single-dish operations for the suite of SRT first light receivers and backends continued in the following years, and was concluded with the first call for shared-risk/early-science observations issued at the end of 2015.
The first search for ultra-high energy (UHE) neutrinos using a radio telescope was conducted by Hankins, Ekers and OSullivan (1996). This was a search for nanosecond duration radio Cherenkov pulses from electromagnetic cascades initiated by ultra-high energy (UHE) neutrino interactions in the lunar regolith, and was made using a broad-bandwidth receiver fitted to the Parkes radio telescope, Australia. At the time, no simulations were available to convert the null result into a neutrino flux limit. Since then, similar experiments at Goldstone, USA, and Kalyazin, Russia, have also recorded null results, and computer simulations have been used to model the experimental sensitivities of these two experiments and put useful limits on the UHE neutrino flux. Proposed future experiments include the use of broad-bandwidth receivers, making the sensitivity achieved by the Parkes experiment highly relevant to the future prospects of this field. We have therefore calculated the effective aperture for the Parkes experiment and found that when pointing at the lunar limb, the effective aperture at all neutrino energies was superior to single-antenna, narrow-bandwidth experiments, and that the detection threshold was comparable to that of the double-antenna experiment at Goldstone. However, because only a small fraction of the observing time was spent pointing the limb, the Parkes experiment places only comparatively weak limits on the UHE neutrino flux. Future efforts should use multiple telescopes and broad-bandwidth receivers.
An antenna array devoted to the autonomous radio-detection of high energy cosmic rays is being deployed on the site of the 21 cm array radio telescope in XinJiang, China. Thanks in particular to the very good electromagnetic environment of this remote experimental site, self-triggering on extensive air showers induced by cosmic rays has been achieved with a small scale prototype of the foreseen antenna array. We give here a detailed description of the detector and present the first detection of extensive air showers with this prototype.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
