Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPerformance of the Imaging Fourier Transform Spectrometer with Photoconductive Detector Arrays: An Application for the AKARI Far-Infrared Instrument
427
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We have developed an imaging Fourier transform spectrometer (FTS) for space-based far-infrared astronomical observations. The FTS employs a newly developed photoconductive detector arrays with a capacitive trans-impedance amplifier, which makes the FTS a completely unique instrument. The FTS was installed as a function of the far-infrared instrument (FIS: Far-Infrared Surveyor) on the Japanese astronomical satellite, AKARI, which was launched on February 21, 2006 (UT) from the Uchinoura Space Center. The FIS-FTS had been operated for more than one year before liquid helium ran out on August 26, 2007. The FIS-FTS was operated nearly six hundreds times, which corresponds to more than one hundred hours of astronomical observations and almost the same amount of time for calibrations. As expected from laboratory measurements, the FIS-FTS performed well and has produced a large set of astronomical data for valuable objects. Meanwhile, it becomes clear that the detector transient effect is a considerable factor for FTSs with photoconductive detectors. In this paper, the instrumentation of the FIS-FTS and interesting phenomena related to FTS using photoconductive detectors are described, and future applications of this kind of FTS system are discussed.
rate research
Read More
The Far-Infrared Surveyor (FIS) onboard the AKARI satellite has a spectroscopic capability provided by a Fourier transform spectrometer (FIS-FTS). FIS-FTS is the first space-borne imaging FTS dedicated to far-infrared astronomical observations. We describe the calibration process of the FIS-FTS and discuss its accuracy and reliability. The calibration is based on the observational data of bright astronomical sources as well as two instrumental sources. We have compared the FIS-FTS spectra with the spectra obtained from the Long Wavelength Spectrometer (LWS) of the Infrared Space Observatory (ISO) having a similar spectral coverage. The present calibration method accurately reproduces the spectra of several solar system objects having a reliable spectral model. Under this condition the relative uncertainty of the calibration of the continuum is estimated to be $pm$ 15% for SW, $pm$ 10% for 70-85 cm^(-1) of LW, and $pm$ 20% for 60-70 cm^(-1) of LW; and the absolute uncertainty is estimated to be +35/-55% for SW, +35/-55% for 70-85 cm^(-1) of LW, and +40/-60% for 60-70 cm^(-1) of LW. These values are confirmed by comparison with theoretical models and previous observations by the ISO/LWS.
We present an overview of SITELLE, an Imaging Fourier Transform Spectrometer (iFTS) available at the 3.6-meter Canada-France-Hawaii Telescope. SITELLE is a Michelson-type interferometer able to reconstruct the spectrum of every light source within its 11 field of view in filter-selected bands of the visible (350 to 900 nm). The spectral resolution can be adjusted up to R = 10 000 and the spatial resolution is seeing-limited and sampled at 0.32 arcsec per pixel. We describe the design of the instrument as well as the data reduction and analysis process. To illustrate SITELLEs capabilities, we present some of the data obtained during and since the August 2015 commissioning run. In particular, we demonstrate its ability to separate the components of the [OII] $lambdalambda$ 3726,29 doublet in Orion and to reach R = 9500 around H-alpha; to detect diffuse emission at a level of 4 x 10e-17 erg/cm2/s/arcsec2; to obtain integrated spectra of stellar absorption lines in galaxies despite the well-known multiplex disadvantage of the iFTS; and to detect emission-line galaxies at different redshifts.
We investigate the structure of the interstellar medium (ISM) and identify the location of possible embedded excitation sources from far-infrared (FIR) line and mid-infrared continuum emission maps. We carried out imaging spectroscopic observations of four giant Galactic star-forming regions with the Fourier Transform Spectrometer (FTS) onboard AKARI. We obtained [OIII] 88 micron and [CII] 158 micron line intensity maps of all the regions: G3.270-0.101, G333.6-0.2, NGC3603, and M17. For G3.270-0.101, we obtained high-spatial-resolution [OIII] 88 micron line-emission maps and a FIR continuum map for the first time, which imply that [OIII] 88 micron emission identifies the excitation sources more clearly than the radio continuum emission. In G333.6-0.2, we found a local [OIII] 88 micron emission peak, which is indicative of an excitation source. This is supported by the 18 micron continuum emission, which is considered to trace the hot dust distribution. For all regions, the [CII] 158 micron emission is distributed widely as suggested by previous observations of star-forming regions. We conclude that [OIII] 88 micron emission traces the excitation sources more accurately than the radio continuum emission, especially where there is a high density and/or column density gradient. The FIR spectroscopy provides a promising means of understanding the nature of star-forming regions.
We describe the Fourier Transform Spectrometer (FTS) used for in-field testing of the POLARBEAR receiver, an experiment located in the Atacama Desert of Chile which measures the cosmic microwave background (CMB) polarization. The POLARBEAR-FTS (PB-FTS) is a Martin-Puplett interferometer designed to couple to the Huan Tran Telescope (HTT) on which the POLARBEAR receiver is installed. The PB-FTS measured the spectral response of the POLARBEAR receiver with signal-to-noise ratio (SNR) $>20$ for $sim$69% of the focal plane detectors due to three features: a high throughput of 15.1 steradian cm$^{2}$, optimized optical coupling to the POLARBEAR optics using a custom designed output parabolic mirror, and a continuously modulated output polarizer. The PB-FTS parabolic mirror is designed to mimic the shape of the 2.5 m-diameter HTT primary reflector which allows for optimum optical coupling to the POLARBEAR receiver, reducing aberrations and systematics. One polarizing grid is placed at the output of the PB-FTS, and modulated via continuous rotation. This modulation allows for decomposition of the signal into different harmonics that can be used to probe potentially pernicious sources of systematic error in a polarization-sensitive instrument. The high throughput and continuous output polarizer modulation features are unique compared to other FTS calibrators used in the CMB field. In-field characterization of the POLARBEAR receiver was accomplished using the PB-FTS in April 2014. We discuss the design, construction, and operation of the PB-FTS and present the spectral characterization of the POLARBEAR receiver. We introduce future applications for the PB-FTS in the next-generation CMB experiment, the Simons Array.
We present stacked average far-infrared spectra of a sample of 197 dusty, star-forming galaxies (DSFGs) at $0.005 < z < 4$ using close to 90% of the SPIRE Fourier Transform Spectrometer (FTS) extragalactic data archive from the Herschel Space Observatory based on 3.5 years of science operations. These spectra explore an observed-frame $rm 447,GHz-1568,GHz$ ($rm 191,mu m-671,mu m$) frequency (wavelength) range allowing us to observe the main atomic and molecular lines emitted by gas in the interstellar medium. The sample is sub-divided into five redshift bins at $0.005 < z < 0.05$, $0.05 < z < 0.2$, $0.2 < z < 0.5$, $0.8 < z <2$, and $2 < z < 4$. To study the dependence of observed spectral lines on total infrared luminosity, the sources in a subset of the redshift bins are stacked in luminosity bins. These stacked spectra are used to determine the average properties of the interstellar medium and dense molecular gas properties of DSFGs, in particular, the fine-structure line ([CII] 158 $mu$m and [OI] 63 $mu$m) luminosity ratios, and the line to far-IR luminosity ratios are used to model the gas density and radiation field strength in the photodissociation regions (PDRs). For the low-redshift sample, we additionally present the average spectral line energy distributions (SLED) of CO and $rm{H_2O}$ rotational transitions and also consider PDR conditions based on a combination of [CI] 370 $mu$m and 609 $mu$m and $rm CO (7-6)$ lines. For the high-z ($0.8 < z < 4$) sample PDR models suggest a molecular gas distribution in the presence of a radiation field that is at least a factor of 10$^3$ larger than the Milky-Way and with a neutral gas density of roughly 10$^3$ to 10$^5$ cm$^{-3}$. The corresponding PDR models for the low-z sample suggest a UV radiation field and gas density comparable to those at high-z.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
