Do you want to publish a course? Click here

The description of the Physical properties of some waste materials, to determine the possibility of recycling

توصيف الخواص الفيزيائية لبعض المواد المستهلكة لتحديد إمكانية إعادة تدويرها

1387   0   45   0 ( 0 )
 Publication date 2016
and research's language is العربية
 Created by Shamra Editor




Ask ChatGPT about the research

This paper presents an experimental study to determine the physical and some other important properties of certain waste materials, in order to identify the appropriate field of their recycling. The experiments have been carried out using five proposed materials, namely: corn cob, peanut peel, straw, pine cone, and sticks of the stem Thistle Syrian plants.



References used
SAMPATHRAJAN A. et al., 1992- Mechanical and thermal properties of particle boards made from farm residues. Journal of Bioresour Technol, 40, 249–51
Nienhuys S., 2004- Plastic Waste Insulation Re-Use of PET for High Altitude Houses. Report of HUYS ADVIES, Kathmandu, Nepal, November, 3, 110
PRANEE L. et al., 2008- New insulating particleboards prepared from mixture of solid wastes from tissue paper manufacturing and corn peel. Journal of Bioresour Technol,99, 4841–5
rate research

Read More

This study was conducted during the 2011-2012 and 2012-2013 seasons in Abu-Jarash orchards area in Damascus to identify the effect of improved organic materials as sludge, manure and compost in improving some soil physical characteristics and whea t productivity. Results showed that the three types of organic material affected the physical characteristics of the studied soil. They decreased its bulk density, increased its total porosity and increased its ability of holding water at field capacity. Results also showed that the compost of city wastes was the best in improving soil physical properties. The three organic materials, particularly the sludge increased the total productivity of wheat (Sham3).
Plastic and rubber products considered of being a great importance to humans, but their residues and wastes are a real environmental disaster. They are dumped in fields, streams and forests or buried in large landfills that pose a serious hazard th at needs to work on solve it in the best possible way. On the other hand, the economic problems caused by the erosion of concrete cement have made it the major problem of infrastructure in the industrialized countries. Over the past three decades, this problem has reached alarming proportions, which led to high repair costs, whether in concrete or in reinforcing steel, Especially acidic media due to concrete permeability of acid rainwater, where these costs exceeded initial construction amounts in some cases. This paper deals with the recycling of used tires and some types of plastic waste to be used in the preparation of insulating materials for water and heat at a low cost compared to the insulation materials currently used in the construction process, in addition to the preparation of floor tiles for internal and external use.
The results showed the possibility of getting at a wide rang of board with different properties, and all investigated percentage had special properties which to use in industrial application, also the result showed the possibility to produce these bo ard without pretreatment of particles wood or without addition any virgin plastic to RLDPE The results showed the possibility of getting of a wide spectrum of boards with different properties, and all studied percentages had special properties which allow them to use in industrial application, also the result showed the possibility to produce these boards without treatment of the wood particles or without addition any virgin plastic to RLDPE
In this research a study was carried out to evaluate the effect of adding random distribution plastic waste fiber inside soil on the geotechnical properties of clayey soil. The research is based on experimental method through many stages.
A proper matching of agricultural machinery with properties of materials forms the essential requirements which lead to best performance of machine. To achieve that goal, availability of data and precision analysis on engineering and physical prop erties of these materials is required. This forms important and necessary data base for the design, development and structure of agricultural machinery and equipments, control and analysis of machines and determination of efficiency of machines. This research was carried out to study some engineering and physical properties of seeds of common Syrian crops to be used in the design and development of some agricultural machinery and equipments. Results provided the shapes and dimensions of cells of feeding devices for planting seeds of some crops namely, wheat, maize, lentil, pea, chick-pea, kidney bean, broad bean and cotton. In addition a set of empirical equations were established to be used to predict, with reasonable accuracy, the physical properties of crops seeds based on measurement of any of three dimensions (length, width and thickness).
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا