Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPrimary-Auxiliary Model Scheduling Based Estimation of the Vertical Wheel Force in a Full Vehicle System
110
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work, we study estimation problems in nonlinear mechanical systems subject to non-stationary and unknown excitation, which are common and critical problems in design and health management of mechanical systems. A primary-auxiliary model scheduling procedure based on time-domain transmissibilities is proposed and performed under switching linear dynamics: In addition to constructing a primary transmissibility family from the pseudo-inputs to the output during the offline stage, an auxiliary transmissibility family is constructed by further decomposing the pseudo-input vector into two parts. The auxiliary family enables to determine the unknown working condition at which the system is currently running at, and then an appropriate transmissibility from the primary transmissibility family for estimating the unknown output can be selected during the online estimation stage. As a result, the proposed approach offers a generalizable and explainable solution to the signal estimation problems in nonlinear mechanical systems in the context of switching linear dynamics with unknown inputs. A real-world application to the estimation of the vertical wheel force in a full vehicle system are, respectively, conducted to demonstrate the effectiveness of the proposed method. During the vehicle design phase, the vertical wheel force is the most important one among Wheel Center Loads (WCLs), and it is often measured directly with expensive, intrusive, and hard-to-install measurement devices during full vehicle testing campaigns. Meanwhile, the estimation problem of the vertical wheel force has not been solved well and is still of great interest. The experimental results show good performances of the proposed method in the sense of estimation accuracy for estimating the vertical wheel force.
rate research
Read More
A community integrated energy system (CIES) with an electric vehicle charging station (EVCS) provides a new way for tackling growing concerns of energy efficiency and environmental pollution, it is a critical task to coordinate flexible demand response and multiple renewable uncertainties. To this end, a novel bi-level optimal dispatching model for the CIES with an EVCS in multi-stakeholder scenarios is established in this paper. In this model, an integrated demand response program is designed to promote a balance between energy supply and demand while maintaining a user comprehensive satisfaction within an acceptable range. To further tap the potential of demand response through flexibly guiding users energy consumption and electric vehicles behaviors (charging, discharging and providing spinning reserves), a dynamic pricing mechanism combining time-of-use and real-time pricing is put forward. In the solution phase, by using sequence operation theory (SOT), the original chance-constrained programming (CCP) model is converted into a readily solvable mixed-integer linear programming (MILP) formulation and finally solved by CPLEX solver. The simulation results on a practical CIES located in North China demonstrate that the presented method manages to balance the interests between CIES and EVCS via the coordination of flexible demand response and uncertain renewables.
We present an integrated approach for perception and control for an autonomous vehicle and demonstrate this approach in a high-fidelity urban driving simulator. Our approach first builds a model for the environment, then trains a policy exploiting the learned model to identify the action to take at each time-step. To build a model for the environment, we leverage several deep learning algorithms. To that end, first we train a variational autoencoder to encode the input image into an abstract latent representation. We then utilize a recurrent neural network to predict the latent representation of the next frame and handle temporal information. Finally, we utilize an evolutionary-based reinforcement learning algorithm to train a controller based on these latent representations to identify the action to take. We evaluate our approach in CARLA, a high-fidelity urban driving simulator, and conduct an extensive generalization study. Our results demonstrate that our approach outperforms several previously reported approaches in terms of the percentage of successfully completed episodes for a lane keeping task.
The state estimation problem can be solved through different methods. In terms of robustness, an effective approach is represented by the Least Absolute Value (LAV) estimator, though vulnerable to leverage points. Based on a previously proposed theorem, in this paper we enunciate, and rigorously demonstrate, a new lemma that proves the identifiability of leverage points in LAV-based state estimation. On the basis of these theoretical foundations, we propose an algorithm for leverage point identification whose performance is validated by means of extensive numerical simulations and compared against more traditional approaches, like Projection Statistics (PS). The obtained results confirm that the proposed method outperforms PS and represents a significant enhancement for LAV-based state estimators as it correctly identifies all the leverage points, independently of the accuracy or the presence of measurement gross errors. A dedicated application example with respect to power system state estimation is finally included and discussed.
In this research, a new data mining-based design approach has been developed for designing complex mechanical systems such as a crashworthy passenger car with uncertainty modeling. The method allows exploring the big crash simulation dataset to design the vehicle at multi-levels in a top-down manner (main energy absorbing system, components, and geometric features) and derive design rules based on the whole vehicle body safety requirements to make decisions towards the component and sub-component level design. Full vehicle and component simulation datasets are mined to build decision trees, where the interrelationship among parameters can be revealed and the design rules are derived to produce designs with good performance. This method has been extended by accounting for the uncertainty in the design variables. A new decision tree algorithm for uncertain data (DTUD) is developed to produce the desired designs and evaluate the design performance variations due to the uncertainty in design variables. The framework of this method is implemented by combining the design of experiments (DOE) and crash finite element analysis (FEA) and then demonstrated by designing a passenger car subject to front impact. The results show that the new methodology could achieve the design objectives efficiently and effectively. By applying the new method, the reliability of the final designs is also increased greatly. This approach has the potential to be applied as a general design methodology for a wide range of complex structures and mechanical systems.
The development of advanced closed-loop irrigation systems requires accurate soil moisture information. In this work, we address the problem of soil moisture estimation for the agro-hydrological systems in a robust and reliable manner. A nonlinear state-space model is established based on the discretization of the Richards equation to describe the dynamics of agro-hydrological systems. We consider that model parameters are unknown and need to be estimated together with the states simultaneously. We propose a consensus-based estimation mechanism, which comprises two main parts: 1) a distributed extended Kalman filtering algorithm used to estimate several model parameters; and 2) a distributed moving horizon estimation algorithm used to estimate the state variables and one remaining model parameter. Extensive simulations are conducted, and comparisons with existing methods are made to demonstrate the effectiveness and superiority of the proposed approach. In particular, the proposed approach can provide accurate soil moisture estimate even when poor initial guesses of the parameters and the states are used, which can be challenging to be handled using existing algorithms.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
