Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new user80-degree field-of-view transmissive metasurface-based spatial light modulator
75
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Compact, lightweight and high-performance spatial light modulators (SLMs) are crucial for modern optical technologies. The drive for pixel miniaturization, necessary to improve their performance, has led to a promising alternative, active optical metasurfaces, which enable tunable subwavelength wavefront manipulation. Here, we demonstrate an all-solid-state programmable transmissive SLM device based on Huygens dielectric metasurfaces. The metasurface features electrical tunability, provided by mature liquid crystals (LCs) technology. In contrast to conventional LC SLMs, our device enables high resolution with a pixel size of ~1 um. We demonstrate its performance by realizing programmable beam steering, which exhibits high side mode suppression ratio of ~6 dB. By complementing the device with a 3D printed doublet microlens, fabricated using two-photon polymerization, we enhance the field of view up to ~80 degrees. The developed prototype paves the way to compact, efficient and multifunctional devices for next generation augmented reality displays, light detection and ranging (LiDAR) systems and optical computing.
rate research
Read More
Spatial light modulators (SLMs) are devices for modulating amplitude, phase or polarization of a light beam on demand. Such devices have been playing an indispensable inuence in many areas from our daily entertainments to scientific researches. In the past decades, the SLMs have been mainly operated in electrical addressing (EASLM) manner, wherein the writing images are created and loaded via conventional electronic interfaces. However, adoption of pixelated electrodes puts limits on both resolution and efficiency of the EASLMs. Here, we present an optically addressed SLM based on a nonlinear metasurface (MS-OASLM), by which signal light is directly modulated by another writing beam requiring no electrode. The MS-OASLM shows unprecedented compactness and is 400 nm in total thickness benefitting from the outstanding nonlinearity of the metasurface. And their subwavelength feature size enables a high resolution up to 250 line pairs per millimeter, which is more than one order of magnitude better than any currently commercial SLMs. Such MS-OASLMs could provide opportunities to develop the next generation of high resolution displays and all-optical information processing technologies.
Light projection displays play an increasingly important role in our modern life. Core projection systems including liquid crystal displays and digital micromirror devices can impose spatial light modulation and actively shape light waves. Recently, the advent of metasurfaces has revolutionized design concepts in nanophotonics, enabling a new family of optical elements with exceptional degrees of freedom. Here, we demonstrate a light projection display technology based on optical metasurfaces, called digital metasurface device (DMSD). Each metasurface pixel in a DMSD is electrically reconfigurable with well-controlled programmability and addressability. The DMSD can not only continuously modulate the intensity of light with high contrast, but also shape the wavefront of light generated by each metasurface pixel and dynamically switch between arbitrary holographic patterns. Our approach will pave an avenue towards the development of customized light projection devices. It will also drive the field of dynamic optical metasurfaces with fresh momentum and inspiring concepts.
The Rashba effect, i.e., the splitting of electronic spin-polarized bands in the momentum space of a crystal with broken inversion symmetry, has enabled the realization of spin-orbitronic devices, in which spins are manipulated by spin-orbit coupling. In optics, where the helicity of light polarization represents the spin degree of freedom for spin-momentum coupling, the optical Rashba effect is manifested by the splitting of optical states with opposite chirality in the momentum space. Previous realizations of the optical Rashba effect relied on passive devices determining either the propagation direction of surface plasmons or circularly polarized light into nanostructures, or the directional emission of polarized luminescence from metamaterials hybridized with light-emitting media. Here we demonstrate an active device underpinned by the optical Rashba effect, in which a monolithic halide perovskite metasurface emits highly directional chiral photoluminescence. An all-dielectric metasurface design with broken in-plane inversion symmetry is directly embossed into the high refractive index, light-emitting perovskite film, yielding a degree of circular polarization of photoluminescence of 40% at room temperature - more than one order of magnitude greater than in state of art chiral perovskites.
Spatial modes of light provide a high-dimensional space that can be used to encode both classical and quantum information. Current approaches for dynamically generating and measuring these modes are slow, due to the need to reconfigure a high-resolution phase mask such as a spatial light modulator or digital micromirror device. The process of updating the spatial mode of light can be greatly accelerated by multiplexing a set of static phase masks with a fast, image-preserving optical switch, such as an acousto-optic modulator (AOM). We experimentally realize this approach, using a double-pass AOM to generate one of five orbital angular momentum states with a switching rate of up to 500 kHz. We then apply this system to perform fast quantum state tomography of spatial modes of light in a 2-dimensional Hilbert space, by projecting the unknown state onto six spatial modes comprising three mutually unbiased bases. We are able to reconstruct arbitrary states in under 1 ms with an average fidelity of 96.9%.
Optical diffraction tomography (ODT) is a three-dimensional (3D) label-free imaging technique. The 3D refractive index distribution of a sample can be reconstructed from multiple two-dimensional optical field images via ODT. Herein, we introduce a temporally low-coherence ODT technique using a ferroelectric liquid crystal spatial light modulator (FLC SLM). The fast binary-phase modulation provided by the FLC SLM ensures a high spatiotemporal resolution with considerably reduced coherent noise. We demonstrate the performance of the proposed system using various samples, including colloidal microspheres and live epithelial cells.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
