Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUnclonable anti-counterfeiting labels based on microlens arrays and luminescent microparticles
64
0
0.0
(
0
)
Authors
Vinay Kumar
Ask ChatGPT about the research
No Arabic abstract
Micron-scale randomness during manufacturing can ensure anti-counterfeiting labels are unclonable. However, this security typically comes at the expense of complex hardware being needed for authentication (e.g., microscopy systems). We demonstrate unclonable labels that can be authenticated using a standard light-emitting diode and smartphone camera. The labels consist of a microlens array laminated to a polymer film that is doped with luminescent microparticles. The micron-scale random overlap of focal volumes and microparticles leads to a pattern of bright points of visible light emission that can be easily imaged by a smartphone camera. 10 000 comparisons of images demonstrate that the labels can be robustly authenticated, and that the probability of a false authentication is on the order of $10^{-15}$. The ability for microlens arrays to simplify the hardware needed for authentication of unclonable labels is generalizable, and attractive for the implementation of unclonable labels in anti-counterfeiting systems.
rate research
Read More
This paper introduces the concept of spin-orbit-torque-MRAM (SOT-MRAM) based physical unclonable function (PUF). The secret of the PUF is stored into a random state of a matrix of perpendicular SOT-MRAMs. Here, we show experimentally and with micromagnetic simulations that this random state is driven by the intrinsic nonlinear dynamics of the free layer of the memory excited by the SOT. In detail, a large enough current drives the magnetization along an in-plane direction. Once the current is removed, the in-plane magnetic state becomes unstable evolving towards one of the two perpendicular stable configurations randomly. In addition, an hybrid CMOS/spintronics model is used to evaluate the electrical characteristics of a PUF realized with an array of 16x16 SOT-MRAM cells. Beyond robustness against voltage and temperature variations, hardware authentication based on this PUF scheme has additional advantages over other PUF technologies such as non-volatility (no power consumption in standby mode), reconfigurability (the secret can be rewritten), and scalability. We believe that this work is a step forward the design of spintronic devices for application in security.
Innovative solutions addressing product anti-counterfeiting and record provenance have been deployed across todays internationally spanning supply chain networks. These product anti-counterfeiting solutions are developed and implemented with centralized system architecture relying on centralized authorities or any form of intermediaries. Vulnerabilities of centralized product anti-counterfeiting solutions could possibly lead to system failure or susceptibility of malicious modifications performed on product records or various potential attacks to the system components by dishonest participant nodes traversing along the supply chain. Blockchain technology has progressed from merely with a use case of immutable ledger for cryptocurrency transactions to a programmable interactive environment of developing decentralized and reliable applications addressing different use cases globally. In this research, so as to facilitate trustworthy data provenance retrieval, verification and management, as well as strengthening capability of product anti-counterfeiting, key areas of decentralization and feasible mechanisms of developing decentralized and distributed product anti-counterfeiting and traceability ecosystems utilizing blockchain technology, are identified via a series of security and threat analyses performed mainly against NFC-Enabled Anti-Counterfeiting System (NAS) which is one of the solutions currently implemented in the industry with centralized architecture. A set of fundamental system requirements are set out for developing a blockchain-enabled autonomous and decentralized solution for supply chain anti-counterfeiting and traceability, as a secure and immutable scientific data provenance tracking and management platform in which provenance records, providing compelling properties on data integrity of luxurious goods, are recorded and verified automatically, for supply chain industry.
The high flexibility, impermeability and strength of graphene membranes are key properties that can enable the next generation of nanomechanical sensors. However, for capacitive pressure sensors the sensitivity offered by a single suspended graphene membrane is too small to compete with commercial sensors. Here, we realize highly sensitive capacitive pressure sensors consisting of arrays of nearly ten thousand small, freestanding double-layer graphene membranes. We fabricate large arrays of small diameter membranes using a procedure that maintains the superior material and mechanical properties of graphene, even after high-temperature anneals. These sensors are readout using a low cost battery-powered circuit board, with a responsivity of up to 47.8 aF Pa$^{-1}$ mm$^{-2}$, thereby outperforming commercial sensors.
Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a light-trapping waveguide to concentrate light onto smaller cells. LSCs can absorb both direct and diffuse sunlight, and thus can operate as flat plate receivers at a fixed tilt and with a conventional module form factor. However, current LSCs experience significant power loss through parasitic luminophore absorption and incomplete light trapping by the optical waveguide. Here we introduce a tandem LSC device architecture that overcomes both of these limitations, consisting of a PLMA polymer layer with embedded CdSe/CdS quantum dot (QD) luminophores and InGaP micro-cells, which serve as a high bandgap absorber on top of a conventional Si photovoltaic. We experimentally synthesize CdSe/CdS QDs with exceptionally high quantum-yield (99%) and ultra-narrowband emission optimally matched to fabricated III-V InGaP micro-cells. Using a Monte Carlo ray-tracing model, we show the radiative limit power conversion efficiency for a module with these components to be 30.8% diffuse sunlight conditions. These results indicate that a tandem LSC-on-Si architecture could significantly improve upon the efficiency of a conventional Si photovoltaic module with simple and straightforward alterations of the module lamination steps of a Si photovoltaic manufacturing process, with promise for widespread module deployment across diverse geographical regions and energy markets.
An interesting research problem in supply chain industry is evaluating and determining provenance of physical goods - demonstrating authenticity of luxury goods. Yet, there have been a few innovative software solutions addressing product anti-counterfeiting and record provenance of todays goods that are produced and transported in complex and internationally-spanning supply chain networks. However, these supply chain systems have been implemented with centralized system architecture, relying on centralized authorities or any form of intermediaries, and leading to issues such as single-point processing, storage and failure, which could be susceptible to malicious modifications of product records or various potential attacks to system components by dishonest participant nodes traversing along the supply chain. Blockchain technology has evolved from being merely a decentralized, distributed and immutable ledger of cryptocurrency transactions to a programmable interactive environment for building decentralized and reliable applications addressing different use cases and existing problems in the world. In this research, the Decentralized NFC-Enabled Anti-Counterfeiting System (dNAS) is proposed and developed, decentralizing a legacy anti-counterfeiting system of supply chain industry using Blockchain technology, to facilitate trustworthy data provenance retrieval, verification and management, as well as strengthening capability of product anti-counterfeiting in supply chain industry. The proposed dNAS utilizes decentralized blockchain network on a consensus protocol compatible with the concept of enterprise consortium, programmable smart contracts and a distributed file storage system to develop a secure and immutable scientific data provenance tracking and management platform on which provenance records, providing compelling properties on data integrity, are validated automatically.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
