Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAn antisite defect mechanism for room temperature ferroelectricity in orthoferrites
70
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Single-phase multiferroic materials that allow the coexistence of ferroelectric and magnetic ordering above room temperature are highly desirable, motivating an ongoing search for mechanisms for unconventional ferroelectricity in magnetic oxides. Here, we report an antisite defect mechanism for room temperature ferroelectricity in epitaxial thin films of yttrium orthoferrite, YFeO3, a perovskite-structured canted antiferromagnet. A combination of piezoresponse force microscopy, atomically resolved elemental mapping with aberration corrected scanning transmission electron microscopy and density functional theory calculations reveals that the presence of YFe antisite defects facilitates a non-centrosymmetric distortion promoting ferroelectricity. This mechanism is predicted to work analogously for other rare earth orthoferrites, with a dependence of the polarization on the radius of the rare earth cation. Furthermore, a vertically aligned nanocomposite consisting of pillars of a magnetoelastic oxide CoFe2O4 embedded epitaxially in the YFeO3 matrix exhibits both robust ferroelectricity and ferrimagnetism at room temperature, as well as a noticeable strain-mediated magnetoelectric coupling effect. Our work uncovers the distinctive role of antisite defects in providing a novel mechanism for ferroelectricity in a range of magnetic orthoferrites and further augments the functionality of this family of complex oxides for multiferroic applications.
rate research
Read More
Advances in complex oxide heteroepitaxy have highlighted the enormous potential of utilizing strain engineering via lattice mismatch to control ferroelectricity in thin-film heterostructures. This approach, however, lacks the ability to produce large and continuously variable strain states, thus limiting the potential for designing and tuning the desired properties of ferroelectric films. Here, we observe and explore dynamic strain-induced ferroelectricity in SrTiO$_3$ by laminating freestanding oxide films onto a stretchable polymer substrate. Using a combination of scanning probe microscopy, optical second harmonic generation measurements, and atomistic modeling, we demonstrate robust room-temperature ferroelectricity in SrTiO$_3$ with 2.0% uniaxial tensile strain, corroborated by the notable features of 180{deg} ferroelectric domains and an extrapolated transition temperature of 400 K. Our work reveals the enormous potential of employing oxide membranes to create and enhance ferroelectricity in environmentally benign lead-free oxides, which hold great promise for applications ranging from non-volatile memories and microwave electronics.
Ferroelectricity at room temperature has been demonstrated in nanometer-thin quasi 2D croconic acid thin films, by the polarization hysteresis loop measurements in macroscopic capacitor geometry, along with observation and manipulation of the nanoscale domain structure by piezoresponse force microscopy. The fabrication of continuous thin films of the hydrogen-bonded croconic acid was achieved by the suppression of the thermal decomposition using low evaporation temperatures in high vacuum, combined with growth conditions far from thermal equilibrium. For nominal coverages >=20 nm, quasi 2D and polycrystalline films, with an average grain size of 50-100 nm and 3.5 nm roughness, can be obtained. Spontaneous ferroelectric domain structures of the thin films have been observed and appear to correlate with the grain patterns. The application of this solvent-free growth protocol may be a key to the development of flexible organic ferroelectric thin films for electronic applications.
2D van der Waals ferroelectric semiconductors have emerged as an attractive building block with immense potential to provide multifunctionality in nanoelectronics. Although several accomplishments have been reported in ferroelectric resistive switching for out-of-plane 2D ferroelectrics down to the monolayer, a purely in-plane ferroelectric has not been experimentally validated at the monolayer thickness. Herein, a micrometer-size monolayer SnS is grown on mica by physical vapor deposition, and in-plane ferroelectric switching is demonstrated with a two-terminal device at room temperature (RT). SnS has been commonly regarded to exhibit the odd-even effect, where the centrosymmetry breaks only in the odd-number layers to exhibit ferroelectricity. Remarkably, however, a robust RT ferroelectricity exists in SnS below a critical thickness of 15 layers with both an odd and even number of layers. The lack of the odd-even effect probably originates from the interaction with the mica substrate, suggesting the possibility of controlling the stacking sequence of multilayer SnS, going beyond the limit of ferroelectricity in the monolayer. This work will pave the way for nanoscale ferroelectric applications based on SnS as a new platform for in-plane ferroelectrics.
Polycrystalline samples of CuCrO2 were synthesized by solid state reaction method. Temperature dependent dielectric measurements, synchrotron x-ray diffraction (SXRD), pyroelectric current and Raman measurements have been performed on these samples. Evidences of the presence of relaxor type ferroelectricity, which otherwise have gone unnoticed in CuCrO2 system (a member of delafossite family) near room temperature, have been presented. Presence of broad maximum in dielectric permittivity and its frequency dispersion indicates relaxor-type ferroelectricity in CuCrO2 near room temperature. Careful analysis of temperature dependent SXRD data and Raman spectroscopic data indicates that the distorted CrO6 octahdera, is giving rise to strain in the sample. Due to this strain, polar regions are forming in an otherwise non-polar matrix, which is giving rise to relaxor type ferroelectricity in the sample. Regularization of CrO6 octahedra and disappearance of disorder induced peak in Raman spectra at high temperatures could be the reason behind observed dielectric anomaly in this sample. Present investigations propose that relaxor type ferroelectricity near room temperature is an inherent property of the CuCrO2 system, making it a fascinating material to be explored further.
Thermal ammonolysis of quasi-two-dimensional (quasi-2D) CoTa2O6 yields the O2-/N3- and anionic vacancy ordered Co2+Ta5+2O6-xN2x/3$Box$x/3 (x $leq$ 0.15) that exhibits a transition from antiferromagnetism to defect engineered above room-temperature ferromagnetism as evidenced by diffraction, spectroscopic and magnetic characterizations. First-principles calculations reveal the origin of ferromagnetism is a particular CoON configuration with N located at Wyckoff position 8j, which breaks mirror symmetry about ab plane. A pressure-induced electronic phase transition is also predicted at around 24.5 GPa, accompanied by insulator-to-metal transition and magnetic moment vanishing.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
