Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEnhancement of light absorption and oxygen vacancy formation in CeO2 by transition metal doping: A DFT study
140
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
It has been demonstrated in previous experimental and computational work that doping CeO2 with transition metals is an effective way of tuning its properties. However, each previous study on CeO2 doping has been limited to a single or a few dopants. In this paper, we systematically study the formation energies, structural stability and electronic properties of CeO2 doped with the entire range of the ten 3d transition metals using density functional theory (DFT) calculations at the hybrid level. The formation energies of oxygen vacancies, and their effects on electronic properties, were also considered. It is found that most of the 3d transition metal dopants can lower the band gap of CeO2, with V and Co doping significantly reducing the band gap to less than 2.0 eV. Furthermore, all of the dopants can lower the formation energy of oxygen vacancies, and those with higher atomic numbers, particularly Cu and Zn, are most effective for this purpose. The electronic structures of doped CeO2 compensated by oxygen vacancies show that the presence of oxygen vacancies can further lower the band gap for most of the dopants, with V-, Cr-, Fe-, Co-, Ni-, and Cu-doped CeO2 all having band gaps of less than 2.0 eV. These results suggest that doping CeO2 with 3d transition metals could enhance the photocatalytic performance under visible light and increase the oxygen vacancy concentration, and they could provide a meaningful guide for the design of CeO2-based materials with improved photocatalytic and catalytic performance as well as enhanced ionic conductivity.
rate research
Read More
There is considerable interest in the pH-dependent switchable biocatalytic properties of cerium oxide nanoparticles (CeNPs) in biomedicine, where these materials exhibit beneficial antioxidant activity against reactive oxygen species at neutral and basic physiological pH but cytotoxic prooxidant activity at acidic pathological pH. Oxygen vacancies play a key role in such biocatalytic activities. While the general characteristics of the role of oxygen vacancies are known, the mechanism of their action at the atomic scale under different pH conditions has yet to be elucidated. The present work applies density functional theory (DFT) calculations to interpret the pH-induced behavior of the stable {111} surface of CeO2 at the atomic scale. Analysis of the surface-adsorbed media species reveals the critical role of pH on the reversibility of the Ce3+ and Ce4+ redox equilibria and the formation and annihilation of the oxygen vacancies. Under acidic conditions, this reversible switching is hindered owing to incomplete volumetric filling of the oxygen vacancies by the oxygen in the water molecules, hence effective retention of the oxygen vacancies, and consequent inhibition of redox biomimetic reactions. Under neutral and basic conditions, the capacity for this reversible switching is preserved due to complete filling of the oxygen vacancies by the OH ions owing to their ready size accommodation, thereby retaining the capacity for performing redox biomimetic reactions cyclically.
The modification of the properties of CeO$_2$ through aliovalent doping are investigated within the emph{ab-initio} density functional theory framework. Lattice parameters, dopant atomic radii, bulk moduli and thermal expansion coefficients of fluorite type Ce$_{1-x}$M$_{x}$O$_{2-y}$ (with M$ = $ Mg, V, Co, Cu, Zn, Nb, Ba, La, Sm, Gd, Yb, and Bi)are presented for dopant concentrations in the range $0.00 leq x leq 0.25$. The stability of the dopants is compared and discussed, and the influence of oxygen vacancies is investigated. It is shown that oxygen vacancies tend to increase the lattice parameter, and strongly decrease the bulk modulus. Defect formation energies are correlated with calculated crystal radii and covalent radii of the dopants, but are shown to present no simple trend. The previously observed inverse relation between the thermal expansion coefficient and the bulk modulus is shown to persist independent of the inclusion of charge compensating vacancies.
Sodium, magnesium and aluminum adatoms, which, respectively, possess one, two and three valence electrons in terms of 3s, $3s^2$, and ($3s^2$, 3p) orbitals, are very suitable for helping us understand the adsorption-induced diverse phenomena. In this study, the revealing properties of metal (Na/Mg/Al)-adsorbed graphene systems are investigated by mean of the first-principles method. The single- and double-side chemisorption cases, the various adatom concentrations, the hollow/top/valley/bridge sites, and the buckled structures are taken into account. The hollow and valley adsorptions, which, respectively, correspond to the Na/Mg and Al cases, create the extremely non-uniform environments within the Moire superlattices. This lead to diverse orbital hybridizations in Na/Mg/Al-Si bonds, as indicated from the Na/Mg/Al-dominated bands, the spatial charge density distributions and the orbital-projected density of states (DOS). Among three kinds of metal-adatom adsorptions, the Al-adsorption configurations present the strongest chemical modifications. The ferromagnetic configurations are shown to only survive in the specific Mg- and Al-adsorptions, but not the Na-cases. The theoretical predictions could be validated by experimental measurements and the up-to-date potential applications are included. Furthermore, the important similarities and differences with the graphene-related systems are also discussed.
We use first-principles calculations to investigate the stability of bi-axially strained textit{Pnma} perovskite CaMnO$_3$ towards the formation of oxygen vacancies. Our motivation is provided by promising indications that novel material properties can be engineered by application of strain through coherent heteroepitaxy in thin films. While it is usually assumed that such epitaxial strain is accommodated primarily by changes in intrinsic lattice constants, point defect formation is also a likely strain relaxation mechanism. This is particularly true at the large strain magnitudes ($>$4%) which first-principles calculations often suggest are required to induce new functionalities. We find a strong dependence of oxygen vacancy defect formation energy on strain, with tensile strain lowering the formation energy consistent with the increasing molar volume with increasing oxygen deficiency. In addition, we find that strain differentiates the formation energy for different lattice sites, suggesting its use as a route to engineering vacancy ordering in epitaxial thin films.
Recently, an experimental study developed an efficient way to obtain sulfur-doped gamma-graphdiyne. This study has shown that this new material could have promising applications in lithium-ion batteries, but the complete understanding of how the sulfur atoms are incorporated into the graphdiyne network is still missing. In this work, we have investigated the sulfur doping process through molecular dynamics and density functional theory simulations. Our results suggest that the doped induced distortions of the gamma-graphdiyne pores prevent the incorporation of more than two sulfur atoms. The most common configuration is the incorporation of just one sulfur atom per the graphdiyne pore.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
