Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDevelopment of an optical photon-counting imager with a monolithic Geiger APD array
55
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We have developed a sensor system based on an optical photon-counting imager with high timing resolution, aiming for highly time-variable astronomical phenomena. The detector is a monolithic Geiger-mode avalanche photodiode array customized in a Multi-Pixel Photon Counter with a response time on the order of nanoseconds. This paper evaluates the basic performance of the sensor and confirms the gain linearity, uniformity, and low dark count. We demonstrate the systems ability to detect the period of a flashing LED, using a data acquisition system developed to obtain the light curve with a time bin of 100 microseconds. The Crab pulsar was observed using a 35-cm telescope without cooling, and the equipment detected optical pulses with a period consistent with the data from the radio ephemeris. Although improvements to the system will be necessary for more reliability, the system has been proven to be a promising device for exploring the time-domain optical astronomy.
rate research
Read More
The Cherenkov Telescope Array (CTA) is an international project for a next-generation ground-based gamma-ray observatory. CTA, conceived as an array of tens of imaging atmospheric Cherenkov telescopes, comprising small, medium and large-size telescopes, is aiming to improve on the sensitivity of current-generation experiments by an order of magnitude and provide energy coverage from 20 GeV to more than 300 TeV. The Schwarzschild-Couder (SC) medium-size candidate telescope model features a novel aplanatic two-mirror optical design capable of a wide field-of-view with significantly improved imaging resolution as compared to the traditional Davis-Cotton optics design. Achieving this imaging resolution imposes strict alignment requirements to be accomplished by a dedicated alignment system. In this contribution we present the status of the development of the SC optical alignment system, soon to be materialized in a full-scale prototype SC medium-size telescope at the Fred Lawrence Whipple Observatory in southern Arizona.
We report on the design and performance of a mixed-signal application specific integrated circuit (ASIC) dedicated to avalanche photodiodes (APDs) in order to detect hard X-ray emissions in a wide energy band onboard the International Space Station. To realize wide-band detection from 20 keV to 1 MeV, we use Ce:GAGG scintillators, each coupled to an APD, with low-noise front-end electronics capable of achieving a minimum energy detection threshold of 20 keV. The developed ASIC has the ability to read out 32-channel APD signals using 0.35 $mu$m CMOS technology, and an analog amplifier at the input stage is designed to suppress the capacitive noise primarily arising from the large detector capacitance of the APDs. The ASIC achieves a performance of 2099 e$^{-}$ + 1.5 e$^{-}$/pF at root mean square (RMS) with a wide 300 fC dynamic range. Coupling a reverse-type APD with a Ce:GAGG scintillator, we obtain an energy resolution of 6.7% (FWHM) at 662 keV and a minimum detectable energy of 20 keV at room temperature (20 $^{circ}$C). Furthermore, we examine the radiation tolerance for space applications by using a 90 MeV proton beam, confirming that the ASIC is free of single-event effects and can operate properly without serious degradation in analog and digital processing.
We describe the current status and the prospect for the development of monolithic Ge:Ga array detector for SAFARI. Our goal is to develop a 64x64 array for the 45 -- 110 um band, on the basis of existing technologies to make 3x20 monolithic arrays for the AKARI satellite. For the AKARI detector we have achieved a responsivity of 10 A/W and a read-out noise limited NEP (noise equivalent power) of 10^-17 W/rHz. We plan to develop the detector for SAFARI with technical improvements; significantly reduced read-out noise with newly developed cold read-out electronics, mitigated spectral fringes as well as optical cross-talks with a multi-layer antireflection coat. Since most of the elemental technologies to fabricate the detector are flight-proven, high technical readiness levels (TRLs) should be achieved for fabricating the detector with the above mentioned technical demonstrations. We demonstrate some of these elemental technologies showing results of measurements for test coatings and prototype arrays.
We implement an electron avalanche photodiode (e-APD) in the MIRC-X instrument, upgrade of the 6-telescope near-infrared imager MIRC, at the CHARA array. This technology should improve the sensitivity of near-infrared interferometry. We first used the classical Mean-Variance analysis to measure the system gain and the amplification gain. We then developed a physical model of the statistical distribution of the camera output signal. This model is based on multiple convolutions of the Poisson statistic, the intrinsic avalanche gain distribution, and the observed distribution of the background signal. At low flux level, this model constraints independently the incident illumination level, the total gain, and the excess noise factor of the amplification. We measure a total transmission of $48pm3%$ including the cold filter and the Quantum Efficiency. We measure a system gain of 0.49 ADU/e, a readout noise of $10$ ADU, and amplification gains as high as 200. These results are consistent between the two methods and therefore validate our modeling approach. The measured excess noise factor based on the modeling is $1.47pm0.03$, with no obvious dependency with flux level or amplification gain. The presented model allows measuring the characteristics of the e-APD array at low flux level independently of preexisting calibration. With $<0.3$,electron equivalent readout noise at kilohertz frame rates, we confirm the revolutionary performances of the camera with respect to the PICNIC or HAWAII technologies. However, the measured excess noise factor is significantly higher than the one claimed in the literature ($<$1.25), and explains why counting multiple photons remains challenging with this camera.
The Keck Planet Imager and Characterizer comprises of a series of upgrades to the Keck II adaptive optics system and instrument suite to improve the direct imaging and high resolution spectroscopy capabilities of the facility instruments NIRC2 and NIRSPEC, respectively. Phase I of KPIC includes a NIR pyramid wavefront sensor and a Fiber Injection Unit (FIU) to feed NIRSPEC with a single mode fiber, which have already been installed and are currently undergoing commissioning. KPIC will enable High Dispersion Coronagraphy (HDC) of directly imaged exoplanets for the first time, providing potentially improved detection significance and spectral characterization capabilities compared to direct imaging. In favorable cases, Doppler imaging, spin measurements, and molecule mapping are also possible. This science goal drives the development of phase II of KPIC, which is scheduled to be deployed in early 2020. Phase II optimizes the system throughput and contrast using a variety of additional submodules, including a 952 element deformable mirror, phase induced amplitude apodization lenses, an atmospheric dispersion compensator, multiple coronagraphs, a Zernike wavefront sensor, and multiple science ports. A testbed is being built in the Exoplanet Technology Lab at Caltech to characterize and test the design of each of these submodules before KPIC phase II is deployed to Keck. This paper presents an overview of the design of phase II and report on results from laboratory testing.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
