Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userModeling of the ECCD injection effect on the Heliotron J and LHD plasma stability
82
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The aim of the study is to analyze the stability of the Energetic Particle Modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. The analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. The simulation results show that the n=1 EPM and n=2 Global AE (GAE) in Heliotron J plasma can be stabilized if the magnetic shear is enhanced at the plasma periphery by an increase (co-ECCD injection) or decrease (ctr-ECCD injection) of the rotational transform at the magnetic axis iota0. In the ctr-ECCD simulations, the EPM/AE growth rate decreases only below a given iota0, similar to the ECCD intensity threshold observed in the experiments. In addition, ctr-ECCD simulations show an enhancement of the continuum damping. The simulations of the LHD discharges with ctr-ECCD injection indicate the stabilization of the n=1 EPM, n=2 Toroidal AE (TAE) and n=3 TAE, caused by an enhancement of the continuum damping in the inner plasma leading to a higher EP beta threshold with respect to the co- and no-ECCD simulations.
rate research
Read More
The aim of the present study is to analyze the stability of the pressure gradient driven modes (PM) and Alfven eigenmodes (AE) in the Large Helical Device (LHD) plasma if the rotational transform profile is modified by the current drive of the tangential neutral beam injectors (NBI). This study forms a basic search for optimized operation scenarios with reduced mode activity. The analysis is performed using the code FAR3d which solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations for density and parallel velocity moments of the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. On-axis and off-axis NBI current drive modifies the rotational transform which becomes strongly distorted as the intensity of the neutral beam current drive (NBCD) increases, leading to wider continuum gaps and modifying the magnetic shear. The simulations with on-axis NBI injection show that a counter (ctr-) NBCD in inward shifted and default configurations leads to a lower growth rate of the PM, although strong n=1 and 2 AEs can be destabilized. For the outward shifted configurations, a co-NBCD improves the AEs stability but the PM are further destabilized if the co-NBCD intensity is 30 kA/T. If the NBI injection is off-axis, the plasma stability is not significantly improved due to the further destabilization of the AE and energetic particle modes (EPM) in the middle and outer plasma region.
The aim of this study is to perform a theoretical analysis of the magnetohydrodynamic (MHD) stability and energetic particle effects on a LHD equilibria, calculated during a discharge where energetic-ion-driven resistive interchange mode (EIC) events were triggered. We use the reduced MHD equations to describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles species. We add the Landau damping and resonant destabilization effects using a closure relation. The simulations suggest that the helically trapped EP driven by the perpendicular neutral beam injector (NBI) further destabilizes the 1/1 MHD-like mode located at the plasma periphery (r/a = 0.88). If the beta of the EP driven by the perpendicular NBI is larger than 0.0025 a 1/1 EIC with a frequency around 3 kHz is destabilized. If the effect of the passing EP driven by the tangential NBI is included on the model, any enhancement of the injection intensity of the tangential NBI below beta=0.025 leads to a decrease of the instability growth rate. The simulations indicate that the perpendicular NBI EP is the main driver of the EIC events, as it was observed in the experiment. If the effect of the helical couplings are added in the model, an 11/13 EIC is destabilized with a frequency around 9 kHz, inward shifted (r/a = 0.81) compared to the 1/1 EIC. Thus, one possible explanation for the EIC frequency chirping down from 9 to 3 kHz is a transition between the 11/13 to the 1/1 EIC due to a weakening of the destabilizing effect of the high n modes, caused by a decrease of the EP drive due to a loss of helically trapped EP or a change in the EP distribution function after the EIC burst.
A Charge eXchange Recombination Spectroscopy (CXRS) system designed to measure the poloidal rotation velocity is developed in Heliotron J. The poloidal CXRS system measures the carbon emission line (C VI, n=8-7, 529.05nm) and the Doppler shift of the emission line provides the information of plasma rotation velocity. A high throughput photographic-lens monochromator (F/2.8) with 0.73nm/mm dispersion is adopted to achieve high rotation velocity and temporal resolution. Since two heating neutral beams from two tangential injectors (NBI) are used as the diagnostic beams, a wide observation range (0.26<r/a<0.92) is covered by 15 sightlines with a high spatial resolution(d<r/a> < 0.06) at peripheral region (r/a>0.6). The system design and the calibration method are presented. The initial results of poloidal rotation measurement show an electron diamagnetic rotation in an NBI heated plasma, while an ion diamagnetic rotation is observed when ECH is additionally applied. The evaluated radial electric field profile shows a positive Er at plasma core region in the ECH+NBI plasma, and a negative Er in the NBI heated plasma.
Numerical simulation of plasma turbulence in the Large Plasma Device (LAPD) [Gekelman et al, Rev. Sci. Inst., 62, 2875, 1991] is presented. The model, implemented in the BOUndary Turbulence (BOUT) code [M. Umansky et al, Contrib. Plasma Phys. 180, 887 (2009)], includes 3-D collisional fluid equations for plasma density, electron parallel momentum, and current continuity, and also includes the effects of ion-neutral collisions. In nonlinear simulations using measured LAPD density profiles but assuming constant temperature profile for simplicity, self-consistent evolution of instabilities and nonlinearly-generated zonal flows results in a saturated turbulent state. Comparisons of these simulations with measurements in LAPD plasmas reveal good qualitative and reasonable quantitative agreement, in particular in frequency spectrum, spatial correlation and amplitude probability distribution function of density fluctuations. For comparison with LAPD measurements, the plasma density profile in simulations is maintained either by direct azimuthal averaging on each time step, or by adding particle source/sink function. The inferred source/sink values are consistent with the estimated ionization source and parallel losses in LAPD. These simulations lay the groundwork for more a comprehensive effort to test fluid turbulence simulation against LAPD data.
General conditions of stability of a very dense deuterium-tritium plasma ball are discussed. It is shown that the decrease in the size of a plasma ball (increase in the plasma density) can be expected only when the temperature and the pressure in the plasma ball are kept high enough for all the particles, the nuclei and the delocalized electrons, to be described by classical statistics.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
