Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEVM-Constrained and Mask-Compliant MIMO-OFDM Spectral Precoding
218
0
0.0
(
0
)
Added by
Shashi Kant
Publication date
2020
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Spectral precoding is a promising technique to suppress out-of-band emissions and comply with leakage constraints over adjacent frequency channels and with mask requirements on the unwanted emissions. However, spectral precoding may distort the original data vector, which is formally expressed as the error vector magnitude (EVM) between the precoded and original data vectors. Notably, EVM has a deleterious impact on the performance of multiple-input multiple-output orthogonal frequency division multiplexing-based systems. In this paper we propose a novel spectral precoding approach which constrains the EVM while complying with the mask requirements. We first formulate and solve the EVM-unconstrained mask-compliant spectral precoding problem, which serves as a springboard to the design of two EVM-constrained spectral precoding schemes. The first scheme takes into account a wideband EVM-constraint which limits the average in-band distortion. The second scheme takes into account frequency-selective EVM-constraints, and consequently, limits the signal distortion at the subcarrier level. Numerical examples illustrate that both proposed schemes outperform previously developed schemes in terms of important performance indicators such as block error rate and system-wide throughput while complying with spectral mask and EVM constraints.
rate research
Read More
This paper proposes a new large-scale mask-compliant spectral precoder (LS-MSP) for orthogonal frequency division multiplexing systems. In this paper, we first consider a previously proposed mask-compliant spectral precoding scheme that utilizes a generic convex optimization solver which suffers from high computational complexity, notably in large-scale systems. To mitigate the complexity of computing the LS-MSP, we propose a divide-and-conquer approach that breaks the original problem into smaller rank 1 quadratic-constraint problems and each small problem yields closed-form solution. Based on these solutions, we develop three specialized first-order low-complexity algorithms, based on 1) projection on convex sets and 2) the alternating direction method of multipliers. We also develop an algorithm that capitalizes on the closed-form solutions for the rank 1 quadratic constraints, which is referred to as 3) semi-analytical spectral precoding. Numerical results show that the proposed LS-MSP techniques outperform previously proposed techniques in terms of the computational burden while complying with the spectrum mask. The results also indicate that 3) typically needs 3 iterations to achieve similar results as 1) and 2) at the expense of a slightly increased computational complexity.
In this paper, we consider hybrid beamforming designs for multiuser massive multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) systems. Aiming at maximizing the weighted spectral efficiency, we propose one alternating maximization framework where the analog precoding is optimized by Riemannian manifold optimization. If the digital precoding is optimized by a locally optimal algorithm, we obtain a locally optimal alternating maximization algorithm. In contrast, if we use a weighted minimum mean square error (MMSE)-based iterative algorithm for digital precoding, we obtain a suboptimal alternating maximization algorithm with reduced complexity in each iteration. By characterizing the upper bound of the weighted arithmetic and geometric means of mean square errors (MSEs), it is shown that the two alternating maximization algorithms have similar performance when the user specific weights do not have big differences. Verified by numerical results, the performance gap between the two alternating maximization algorithms becomes large when the ratio of the maximal and minimal weights among users is very large. Moreover, we also propose a low-complexity closed-form method without iterations. It employs matrix decomposition for the analog beamforming and weighted MMSE for the digital beamforming. Although it is not supposed to maximize the weighted spectral efficiency, it exhibits small performance deterioration compared to the two iterative alternating maximization algorithms and it qualifies as a good initialization for iterative algorithms, saving thereby iterations.
This work focuses on the downlink communication of a multiuser MIMO system where the base station antennas and the users receiving antennas are all active, but at each transmission, only a subset of the receive antennas is selected by the base station to receive the information symbols, and the particular chosen subset (pattern) represents part of the information conveyed to the user. In this paper we present a mathematical model for the system and develop expressions that are fairly general and adequate for its analysis. Based on these expressions we propose a procedure to optimize the choice by the ERB of the sets of antenna patterns to be used in the transmissions to the different users, aiming at the maximization of the detection signal-to-noise ratio. Performance results, with and without the optimization procedure, are presented for different scenarios.
We consider the vector perturbation (VP) precoder design for multiuser multiple-input single output (MU-MISO) broadcast channel systems which is robust to power scaling factor errors. VP precoding has so far been developed and analyzed under the assumption that receivers could have known the power scaling factor in advance of tranmission perfectly, which is hard to obtain due to the large dynamic range and limited feedforward. However, as demonstrated in our results the performance of VP precoding is quite sensitive to the accuracy of power scaling factor and always encounter an error floor at mid to high signal-to-noise ratio (SNR) regimes. Motivated by such observations, we propose a robust VP precoder based on the minimum mean square error (MMSE) criterion. Simulation results show that, the robust VP precoder outperforms conventional VP precoding designs, as less sensitive to power scaling factor errors.
User electromagnetic (EM) exposure is continuously being exacerbated by the evolution of multi-antenna portable devices. To mitigate the effects of EM radiation, portable devices must satisfy tight regulations on user exposure level, generally measured by specific absorption rate (SAR). To this end, we investigate the SAR-aware uplink precoder design for the energy efficiency (EE) maximization in multiuser multiple-input multiple-output transmission exploiting statistical channel state information (CSI). As the objective function of the design problem is computationally demanding in the absence of closed form, we present an asymptotic approximation of the objective to facilitate the precoder design. An iterative algorithm based on Dinkelbachs method and sequential optimization is proposed to obtain an optimal solution of the asymptotic EE optimization problem. Based on the transformed problem, an iterative SAR-aware water-filing scheme is further conceived for the EE optimization precoding design with statistical CSI. Numerical results illustrate substantial performance improvements provided by our proposed SAR-aware energy-efficient transmission scheme over the traditional baseline schemes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
