Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userObservation of supercavity modes in subwavelength dielectric resonators
54
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Electromagnetic response of dielectric resonators with high refractive index is governed by optically induced electric and magnetic Mie resonances facilitating confinement of light with the amplitude enhancement. However, strong subwavelength trapping of light was associated traditionally only with plasmonic or epsilon-near-zero structures which however suffer from losses. Recently, an alternative localization mechanism was proposed to trap light in individual subwavelength optical resonators with a high quality factor in the regime of a supercavity mode. Here, we present the experimental observation of the supercavity modes in subwavelength ceramic resonators in the radiofrequency range. We demonstrate experimentally that the regime of supercavity mode can be achieved via precise tuning of the resonators dimensions resulting in a huge growth of the quality factor reaching the experimental values up to 1.25x10^4, being limited only by material losses in dielectrics. We reveal that the supercavity modes can be excited efficiently by both near- and far-fields by means of dipole sources and plane waves, respectively. In both the cases, the supercavity mode manifests itself clearly via characteristic peculiarities of the Fano resonance and radiation patterns. Our work paves the way for future compact practical devices in photonics and radiophysics.
rate research
Read More
In this work, we present an in-depth experimental and numerical study of the short-range THz communications links that use subwavelength dielectric fibers for information transmission and define main challenges and tradeoffs in the link implementation. Particularly, we use air or foam-cladded polypropylene-core subwavelength dielectric THz fibers of various diameters (0.57-1.75 mm) to study link performance as a function of the link length of up to ~10 m, and data bitrates of up to 6 Gbps at the carrier frequency of 128 GHz (2.34 mm wavelength). We find that depending on the fiber diameter, the quality of the transmitted signal is mostly limited either by the modal propagation loss or by the fiber velocity dispersion (GVD). An error-free transmission over 10 meters is achieved for the bit rate of 4 Gbps using the fiber of smaller 0.57 mm diameter. Furthermore, since the fields of subwavelength fibers are weakly confined and extend deep into the air cladding, we study the modal field extent outside of the fiber core, as well as fiber bending loss. Finally, the power budget of the rod-in-air subwavelength THz fiber-based links is compared to that of free space communication links and we demonstrate that fiber links offer an excellent solution for various short-range applications.
Electromagnetic scattering on subwavelength structures keeps attracting attention owing to abroad range of possible applications, where this phenomenon is in use. Fundamental limits of scattering cross-section, being well understood in spherical geometries, are overlooked in cases of low-symmetry resonators. Here, we revise the notion of superscattering and link this property with symmetry groups of the scattering potential. We demonstrate pathways to spectrally overlap several eigenmodes of a resonator in a way they interfere constructively and enhance the scattering cross-section. As a particular example, we demonstrate spectral overlapping of several electric and magnetic modes in a subwavelength entirely homogeneous ceramic resonator. The optimized structures show the excess of a dipolar scattering cross-section limit for a sphere up to a factor of four. The revealed rules, which link symmetry groups with fundamental scattering limits, allow performing and assessing designs of subwavelength supperscatterers, which can find a use in label-free imaging, compact antennas, long-range radio frequency identification, and many other fields.
Topological valley photonics has emerged as a new frontier in photonics with many promising applications. Previous valley boundary transport relies on kink states at internal boundaries between two topologically distinct domains. However, recent studies have revealed a novel class of topological chiral edge states (CESs) at external boundaries of valley materials, which have remained elusive in photonics. Here, we propose and experimentally demonstrate the topological CESs in valley photonic metamaterials (VPMMs) by accurately tuning on-site edge potentials. Moreover, the VPMMs work at deep-subwavelength scales. Thus, the supported CESs are highly confined and self-guiding without relying on a cladding layer to prevent leakage radiation. Via direct near-field measurements, we observe the bulk bandgap, the edge dispersions, and the robust edge transport passing through sharp corners, which are hallmarks of the CESs. Our work paves a way to explore novel topological edge states in valley photonics and sheds light on robust and miniaturized photonic devices.
This paper proposes a novel technique for the design of miniaturized waveguide filters based on locally resonant metamaterials (LRMs). We implement ultra-small metamaterial filters (Meta-filters) by exploiting a subwavelength (sub-lambda guiding mechanism in evanescent hollow waveguides, which are loaded by small resonators. In particular, we use composite pin-pipe waveguides (CPPWs) built from a hollow metallic pipe loaded by a set of resonant pins, which are spaced by deep subwavelength distances. We demonstrate that in such structures, multiple resonant scattering nucleates a sub-lambda mode with a customizable bandwidth below the induced hybridization bandgap (HBG) of the LRM. The sub-lambda guided mode and the HBG, respectively, induce pass- and rejection- bands in a finite-length CPPW, creating a filter whose main properties are largely decoupled from the specific arrangement of the resonant inclusions. To guarantee compatibility with existing technologies, we propose a unique subwavelength method to match the small CPPW filters to standard waveguide interfaces, which we call a meta-port. Finally, we build and test a family of low- and high-order ultra-compact aluminum CPPW filters in the Ku-band (10-18GHz). Our measurements demonstrate the customizability of the bandwidth and the robustness of the passband against geometrical scaling. The 3D-printed prototypes, which are one order of magnitude smaller and lighter than traditional filters and are also compatible with standard waveguide interfaces, may find applications in future satellite systems and 5G infrastructures.
Systems with low mechanical dissipation are extensively used in precision measurements such as gravitational wave detection, atomic force microscopy and quantum control of mechanical oscillators via opto- and electromechanics. The mechanical quality factor ($Q$) of these systems determines the thermomechanical force noise and the thermal decoherence rate of mechanical quantum states. While the dissipation rate is typically set by the bulk acoustic properties of the material, by exploiting dissipation dilution, mechanical $Q$ can be engineered through geometry and increased by many orders of magnitude. Recently, soft clamping in combination with strain engineering has enabled room temperature quality factors approaching one billion ($10^9$) in millimeter-scale resonators. Here we demonstrate a new approach to soft clamping which exploits vibrations in the perimeter of polygon-shaped resonators tethered at their vertices. In contrast to previous approaches, which rely on cascaded elements to achieve soft clamping, perimeter modes are soft clamped due to symmetry and the boundary conditions at the polygon vertices. Perimeter modes reach $Q$ of 3.6 billion at room temperature while spanning only two acoustic wavelengths---a 4-fold improvement over the state-of-the-art mechanical $Q$ with 10-fold smaller devices. The small size of our devices makes them well-suited for near-field integration with microcavities for quantum optomechanical experiments. Moreover, their compactness allows the realization of phononic lattices. We demonstrate a one-dimensional Su-Schrieffer-Heeger chain of high-$Q$ perimeter modes coupled via nearest-neighbour interaction and characterize the localized edge modes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
