Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSubwavelength Meta-Waveguide Filters and Meta-Ports
121
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
This paper proposes a novel technique for the design of miniaturized waveguide filters based on locally resonant metamaterials (LRMs). We implement ultra-small metamaterial filters (Meta-filters) by exploiting a subwavelength (sub-lambda guiding mechanism in evanescent hollow waveguides, which are loaded by small resonators. In particular, we use composite pin-pipe waveguides (CPPWs) built from a hollow metallic pipe loaded by a set of resonant pins, which are spaced by deep subwavelength distances. We demonstrate that in such structures, multiple resonant scattering nucleates a sub-lambda mode with a customizable bandwidth below the induced hybridization bandgap (HBG) of the LRM. The sub-lambda guided mode and the HBG, respectively, induce pass- and rejection- bands in a finite-length CPPW, creating a filter whose main properties are largely decoupled from the specific arrangement of the resonant inclusions. To guarantee compatibility with existing technologies, we propose a unique subwavelength method to match the small CPPW filters to standard waveguide interfaces, which we call a meta-port. Finally, we build and test a family of low- and high-order ultra-compact aluminum CPPW filters in the Ku-band (10-18GHz). Our measurements demonstrate the customizability of the bandwidth and the robustness of the passband against geometrical scaling. The 3D-printed prototypes, which are one order of magnitude smaller and lighter than traditional filters and are also compatible with standard waveguide interfaces, may find applications in future satellite systems and 5G infrastructures.
rate research
Read More
Huygens metasurfaces have demonstrated almost arbitrary control over the shape of a scattered beam, however, its spatial profile is typically fixed at fabrication time. Dynamic reconfiguration of this beam profile with tunable elements remains challenging, due to the need to maintain the Huygens condition across the tuning range. In this work, we experimentally demonstrate that a time-varying metadevice which performs frequency conversion can steer transmitted or reflected beams in an almost arbitrary manner, with fully dynamic control. Our time-varying Huygens metadevice is made of both electric and magnetic meta-atoms with independently controlled modulation, and the phase of this modulation is imprinted on the scattered parametric waves, controlling their shapes and directions. We develop a theory which shows how the scattering directionality, phase and conversion efficiency of sidebands can be manipulated almost arbitrarily. We demonstrate novel effects including all-angle beam steering and frequency-multiplexed functionalities at microwave frequencies around 4 GHz, using varactor diodes as tunable elements. We believe that the concept can be extended to other frequency bands, enabling metasurfaces with arbitrary phase pattern that can be dynamically tuned over the complete 2pi range.
Interaction of electromagnetic radiation with time-variant objects is a fundamental problem whose study involves foundational principles of classical electrodynamics. Such study is a necessary preliminary step for delineating the novel research field of linear time-varying metamaterials and metasurfaces. A closer look to the literature, however, reveals that this crucial step has not been addressed and important simplifying assumptions have been made. Before proceeding to studies of linear time-varying metamaterials and metasurfaces with their effective parameters, we need to rigorously describe the electric and magnetic responses of a temporally-modulated meta-atom. Here, we introduce a theoretical model which describes a time-variant meta-atom and its interaction with incident electromagnetic waves in time domain. The developed general approach is specialized for a dipole emitter/scatterer loaded with a time-varying reactive element. We confirm the validity of the theoretical model with full-wave simulations. Our study is of major significance also in the area of nanophotonics and nano-optics because the optical properties of all-dielectric and plasmonic nanoparticles can be varied in time in order to achieve intriguing scattering phenomena.
Graded metasurfaces exploit the local momentum imparted by an impedance gradient to transform the impinging wavefront. This approach suffers from fundamental limits on the overall conversion efficiency and it is challenged by fabrication limitations on the maximum spatial resolution. Here, we introduce the concept of meta-gratings, which enables arbitrary wavefront engineering with unitary efficiency and significantly lower demands on the fabrication precision. We employ this concept to design reflective metasurfaces for wavefront steering without limitations on efficiency. A similar approach is envisioned for transmitted beams and for arbitrary wavefront transformation, opening promising opportunities for highly-efficient metasurfaces for extreme wave manipulation.
Metasurfaces advanced the field of optics by reducing the thickness of optical components and merging multiple functionalities into a single layer device. However, this generally comes with a reduction in performance, especially for multifunctional and broadband applications. Three-dimensional metastructures can provide the necessary degrees of freedom for advanced applications, while maintaining minimal thickness. This work explores 3D mechanically reconfigurable devices that perform focusing, spectral demultiplexing, and polarization sorting based on mechanical configuration. As proof of concept, a rotatable device, auxetic device, and a shearing-based device are designed with adjoint-based topology optimization, 3D-printed, and measured at microwave frequencies (7.6-11.6 GHz) in an anechoic chamber.
Metasurfaces based on geometric phase acquired from the conversion of the optical spin states provide a robust control over the wavefront of light, and have been widely employed for construction of various types of functional metasurface devices. However, this powerful approach cannot be readily transferred to the manipulation of acoustic waves because acoustic waves do not possess the spin degree of freedom. Here, we propose the concept of acoustic geometric-phase meta-array by leveraging the conversion of orbital angular momentum of acoustic waves, where well-defined geometric-phases can be attained through versatile topological charge conversion processes. This work extends the concept of geometric-phase metasurface from optics to acoustics, and provides a new route for acoustic wave control.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
