Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOptical imaging of antiferromagnetic domains in ultrathin CoO(001) films
408
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Antiferromagnetic (AFM) domains in ultrathin CoO(001) films are imaged by a wide-field optical microscopy using magneto-optical birefringence effect. The magnetic origin of observed optical contrast is confirmed by the spin orientation manipulation through exchange coupling in Fe/CoO(001) bilayer. The finite size effect of ordering temperature for ultrathin single crystal CoO film is revealed by the thickness and temperature dependent measurement of birefringence contrast. The magneto-optical birefringence effect is found to strongly depend on the photon energy of incident light, and a surprising large polarization rotation angle up to 168.5 mdeg is obtained from a 4.6 nm CoO film with a blue light source, making it possible to further investigate the evolution of AFM domains in AFM ultrathin film under external field.
rate research
Read More
Recent demonstrations of electrical detection and manipulation of antiferromagnets (AFMs) have opened new opportunities towards robust and ultrafast spintronics devices. However, it is difficult to establish the connection between the spin-transport behavior and the microscopic AFM domain states due to the lack of the real-time AFM domain imaging technique under the electric field. Here we report a significant Voigt rotation up to 60 mdeg in thin NiO(001) films at room temperature. Such large Voigt rotation allows us to directly observe AFM domains in thin-film NiO by utilizing a wide-field optical microscope. Further complementary XMLD-PEEM measurement confirms that the Voigt contrast originates from the NiO AFM order. We examine the domain pattern evolution at a wide range of temperature and with the application of external magnetic field. Comparing to large-scale-facility techniques such as the X-ray photoemission electron microscopy, the use with a wide-field, tabletop optical imaging method enables straightforward access to domain configurations of single-layer AFMs.
The structure and strain of ultrathin CoO films grown on a Pt(001) substrate and on a ferromagnetic PtFe pseudomorphic layer on Pt(001) have been determined with insitu and real time surface x-ray diffraction. The films grow epitaxially on both surfaces with an in-plane hexagonal pattern that yields a pseudo-cubic CoO(111) surface. A refined x-ray diffraction analysis reveals a slight monoclinic distortion at RT induced by the anisotropic stress at the interface. The tetragonal contribution to the distortion results in a ratio c/a > 1, opposite to that found in the low temperature bulk CoO phase. This distortion leads to a stable Co2+ spin configuration within the plane of the film.
Epitaxial ultrathin Fe films on fcc Cu(001) exhibit a spin spiral (SS), in contrast to the ferromagnetism of bulk bcc Fe. We study the in-plane and out-of-plane Fermi surfaces (FSs) of the SS in 8 monolayer Fe/Cu(001) films using energy dependent soft x-ray momentum-resolved photoemission spectroscopy. We show that the SS originates in nested regions confined to out-of-plane FSs, which are drastically modified compared to in-plane FSs. From precise reciprocal space maps in successive zones, we obtain the associated real space compressive strain of 1.5+-0.5% along c-axis. An autocorrelation analysis quantifies the incommensurate ordering vector q=(2pi/a)(0,0,~0.86), favoring a SS and consistent with magneto-optic Kerr effect experiments. The results reveal the importance of in-plane and out-of-plane FS mapping for ultrathin films.
When a polarized light beam is incident upon the surface of a magnetic material, the reflected light undergoes a polarization rotation. This magneto-optical Kerr effect (MOKE) has been intensively studied in a variety of ferro- and ferrimagnetic materials because it provides a powerful probe for electronic and magnetic properties as well as for various applications including magneto-optical recording. Recently, there has been a surge of interest in antiferromagnets (AFMs) as prospective spintronic materials for high-density and ultrafast memory devices, owing to their vanishingly small stray field and orders of magnitude faster spin dynamics compared to their ferromagnetic counterparts. In fact, the MOKE has proven useful for the study and application of the antiferromagnetic (AF) state. Although limited to insulators, certain types of AFMs are known to exhibit a large MOKE, as they are weak ferromagnets due to canting of the otherwise collinear spin structure. Here we report the first observation of a large MOKE signal in an AF metal at room temperature. In particular, we find that despite a vanishingly small magnetization of $M sim$0.002 $mu_{rm B}$/Mn, the non-collinear AF metal Mn$_3$Sn exhibits a large zero-field MOKE with a polar Kerr rotation angle of 20 milli-degrees, comparable to ferromagnetic metals. Our first-principles calculations have clarified that ferroic ordering of magnetic octupoles in the non-collinear Neel state may cause a large MOKE even in its fully compensated AF state without spin magnetization. This large MOKE further allows imaging of the magnetic octupole domains and their reversal induced by magnetic field. The observation of a large MOKE in an AF metal should open new avenues for the study of domain dynamics as well as spintronics using AFMs.
The phase immiscibility and the excellent matching between Ag(001) and Fe(001) unit cells (mismatch 0.8 %) make Fe/Ag growth attractive in the field of low dimensionality magnetic systems. Intermixing could be drastically limited at deposition temperatures as low as 140-150 K. The film structural evolution induced by post-growth annealing presents many interesting aspects involving activated atomic exchange processes and affecting magnetic properties. Previous experiments, of He and low energy ion scattering on films deposited at 150 K, indicated the formation of a segregated Ag layer upon annealing at 550 K. Higher temperatures led to the embedding of Fe into the Ag matrix. In those experiments, information on sub-surface layers was attained by techniques mainly sensitive to the topmost layer. Here, systematic PED measurements, providing chemical selectivity and structural information for a depth of several layers, have been accompanied with a few XRD rod scans, yielding a better sensitivity to the buried interface and to the film long range order. The results of this paper allow a comparison with recent models enlightening the dissolution paths of an ultra thin metal film into a different metal, when both subsurface migration of the deposit and phase separation between substrate and deposit are favoured. The occurrence of a surfactant-like stage, in which a single layer of Ag covers the Fe film is demonstrated for films of 4-6 ML heated at 500-550 K. Evidence of a stage characterized by the formation of two Ag capping layers is also reported. As the annealing temperature was increased beyond 700 K, the surface layers closely resembled the structure of bare Ag(001) with the residual presence of subsurface Fe aggregates.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
