Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNear-degenerate quadrature-squeezed vacuum generation on a silicon-nitride chip
401
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint silicon-nitride microresonator with a dual-pumped four-wave-mixing process. We record a squeezed noise level of 1.34 dB ($pm$0.16 dB) below the photocurrent shot noise, which corresponds to 3.09 dB ($pm$0.49 dB) of quadrature squeezing on chip. We also show that it is critical to account for the nonlinear behavior of the pump fields to properly predict the squeezing that can be generated in this system. This technology represents a significant step toward creating and manipulating large-scale CV cluster states that can be used for quantum information applications including universal quantum computing.
rate research
Read More
Two-dimensional hexagonal boron nitride (hBN) that hosts bright room-temperature single-photon emitters (SPEs) is a promising material platform for quantum information applications. An important step towards the practical application of hBN is the on-demand, position-controlled generation of SPEs. Several strategies have been reported to achieve the deterministic creation of hBN SPEs. However, they either rely on a substrate nanopatterning procedure that is not compatible with integrated photonic devices or utilize a radiation source that might cause unpredictable damage to hBN and underlying substrates. Here, we report a radiation- and lithography-free route to deterministically activate hBN SPEs by nanoindentation with an atomic force microscope (AFM) tip. The method is applied to thin hBN flakes (less than 25 nm in thickness) on flat silicon-dioxide-silicon substrates that can be readily integrated into on-chip photonic devices. The achieved SPEs yields are above 30% by utilizing multiple indent sizes, and a maximum yield of 36% is demonstrated for the indent size of around 400 nm. Our results mark an important step towards the deterministic creation and integration of hBN SPEs with photonic and plasmonic on-chip devices.
Engineering an array of precisely located cavity-coupled active media poses a major experimental challenge in the field of hybrid integrated photonics. We deterministically position solution processed colloidal quantum dots (QDs) on high quality-factor silicon nitride nanobeam cavities and demonstrate light-matter coupling. By lithographically defining a window on top of an encapsulated cavity that is cladded in a polymer resist, and spin coating QD solution, we can precisely control the placement of the QDs, which subsequently couple to the cavity. We show that the number of QDs coupled to the cavity can be controlled by the size of the window. Furthermore, we demonstrate Purcell enhancement and saturable photoluminescence in this QD-cavity platform. Finally, we deterministically position QDs on a photonic molecule and observe QD-coupled cavity super-modes. Our results pave the way for controlling the number of QDs coupled to a cavity by engineering the window size, and the QD dimension, and will allow advanced studies in cavity enhanced single photon emission, ultralow power nonlinear optics, and quantum many-body simulations with interacting photons.
Optical levitation of dielectric particles in vacuum is a powerful technique for precision measurements, testing fundamental physics, and quantum information science. Conventional optical tweezers require bulky optical components for trapping and detection. Here we design and fabricate an ultrathin dielectric metalens with a high numerical aperture of 0.88 at 1064 nm in vacuum. It consists of 500 nm-thick silicon nano-antennas, which are compatible with ultrahigh vacuum. We demonstrate optical levitation of nanoparticles in vacuum with a single metalens. The trapping frequency can be tuned by changing the laser power and polarization. We also transfer a levitated nanoparticle between two separated optical tweezers. Optical levitation with an ultrathin metalens in vacuum provides opportunities for a wide range of applications including on-chip sensing. Such metalenses will also be useful for trapping ultacold atoms and molecules.
Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge because all experiments so far require an external object to be manually positioned close to the mechanical element. Here, by integrating a force-sensing micromechanical beam and an electrostatic actuator on a single chip, we demonstrate the Casimir effect between two micromachined silicon components on the same substrate. A high degree of parallelism between the two near-planar interacting surfaces can be achieved because they are defined in a single lithographic step. Apart from providing a compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes.
We experimentally show octave-spanning supercontinuum generation in a non-stoichiometric silicon-rich nitride waveguide when pumped by femtosecond pulses from an erbium fiber laser. The pulse energy and bandwidth are comparable to results achieved in stoichiometric silicon nitride waveguides, but our material platform is simpler to manufacture. We also observe wave-breaking supercontinuum generation by using orthogonal pumping in the same waveguide. Additional analysis reveals that the waveguide height is a powerful tuning parameter for generating mid-infrared dispersive waves while keeping the pump in the telecom band.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
