Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAnalytical Modeling of the Path-Loss for Reconfigurable Intelligent Surfaces -- Anomalous Mirror or Scatterer ?
90
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Reconfigurable intelligent surfaces (RISs) are an emerging field of research in wireless communications. A fundamental component for analyzing and optimizing RIS-empowered wireless networks is the development of simple but sufficiently accurate models for the power scattered by an RIS. By leveraging the general scalar theory of diffraction and the Huygens-Fresnel principle, we introduce simple formulas for the electric field scattered by an RIS that is modeled as a sheet of electromagnetic material of negligible thickness. The proposed approach allows us to identify the conditions under which an RIS of finite size can or cannot be approximated as an anomalous mirror. Numerical results are illustrated to confirm the proposed approach.
rate research
Read More
Reconfigurable intelligent surfaces (RISs) provide an interface between the electromagnetic world of the wireless propagation environment and the digital world of information science. Simple yet sufficiently accurate path loss models for RISs are an important basis for theoretical analysis and optimization of RIS-assisted wireless communication systems. In this paper, we refine our previously proposed free-space path loss model for RISs to make it simpler, more applicable, and easier to use. In the proposed path loss model, the impact of the radiation patterns of the antennas and unit cells of the RIS is formulated in terms of an angle-dependent loss factor. The refined model gives more accurate estimates of the path loss of RISs comprised of unit cells with a deep sub-wavelength size. The free-space path loss model of the sub-channel provided by a single unit cell is also explicitly provided. In addition, two fabricated RISs, which are designed to operate in the millimeter-wave (mmWave) band, are utilized to carry out a measurement campaign in order to characterize and validate the proposed path loss model for RIS-assisted wireless communications. The measurement results corroborate the proposed analytical model. The proposed refined path loss model for RISs reveals that the reflecting capability of a single unit cell is proportional to its physical aperture and to an angle-dependent factor. In particular, the far-field beamforming gain provided by an RIS is mainly determined by the total area of the surface and by the angles of incidence and reflection.
Reconfigurable intelligent surfaces (RISs) are planar structures with attached electronic circuitry that enable a partially programmable communication environment. RIS operation can be regarded as nearly passive since it acts by simply reflecting the impinging traveling waves towards desired directions, thus requiring energy only for the reconfiguration of its reflective elements (REs). This paper tackles the problem of wirelessly powering RIS circuitry via control signaling. Simultaneous wireless information and power transfer (SWIPT) is considered by taking into account two basic principles: that signal quality of the control signals is sufficient for information detection, and that there is enough harvested energy for the reconfiguration. Some of the most common SWIPT receivers (time sharing, power splitting, dynamic power splitting, and antenna selection) are studied and the corresponding proposed optimization problems implementing the aforementioned principles are formulated and solved in closed form. Numerical results show the effectiveness of the proposed methods in the presence of received power fluctuations.
Reconfigurable intelligent surfaces (RISs) comprised of tunable unit cells have recently drawn significant attention due to their superior capability in manipulating electromagnetic waves. In particular, RIS-assisted wireless communications have the great potential to achieve significant performance improvement and coverage enhancement in a cost-effective and energy-efficient manner, by properly programming the reflection coefficients of the unit cells of RISs. In this paper, free-space path loss models for RIS-assisted wireless communications are developed for different scenarios by studying the physics and electromagnetic nature of RISs. The proposed models, which are first validated through extensive simulation results, reveal the relationships between the free-space path loss of RIS-assisted wireless communications and the distances from the transmitter/receiver to the RIS, the size of the RIS, the near-field/far-field effects of the RIS, and the radiation patterns of antennas and unit cells. In addition, three fabricated RISs (metasurfaces) are utilized to further corroborate the theoretical findings through experimental measurements conducted in a microwave anechoic chamber. The measurement results match well with the modeling results, thus validating the proposed free-space path loss models for RIS, which may pave the way for further theoretical studies and practical applications in this field.
With both the standardization and commercialization completed in an unforeseen pace for the 5th generation (5G) wireless network, researchers, engineers and executives from the academia and the industry have turned their sights on candidate technologies to support the next generation wireless networks. Reconfigurable intelligent surfaces (RIS), sometimes referred to as intelligent reflecting surfaces (IRS), have been identified to be potential components of the future wireless networks because they can reconfigure the propagation environment for wireless signals with low-cost passive devices. In doing so, the coverage of a cell can be expected to increase significantly as well as the overall throughput of the network. RIS has not only become an attractive research area but also triggered a couple of projects to develop appropriate solutions to enable the set-up of hardware demonstrations and prototypes. In parallel, technical discussions and activities towards standardization already took off in some regions. Promoting RIS to be integrated into future commercial networks and become a commercial success requires significant standardization work taken place both at regional level standards developing organizations (SDO) and international SDOs such as the 3rd Generation Partnership Project (3GPP). While many research papers study how RIS can be used and optimized, few effort is devoted to analyzing the challenges to commercialize RIS and how RIS can be standardized. This paper intends to shed some light on RIS from an industrial viewpoint and provide a clear roadmap to make RIS industrially feasible.
A reconfigurable intelligent surface (RIS) is a metamaterial that can be integrated into walls and influence the propagation of electromagnetic waves. This, typically passive radio frequency (RF) technology is emerging for indoor and outdoor use with the potential of making wireless communications more reliable in increasingly challenging radio environments. This paper goes one step further and introduces mobile RIS, specifically, RIS carried by unmanned aerial vehicles (UAVs) to support cellular communications networks and services of the future. We elaborate on several use cases, challenges, and future research opportunities for designing and optimizing wireless systems at low cost and with low energy footprint.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
