Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNanobenders: efficient piezoelectric actuators for widely tunable nanophotonics at CMOS-level voltages
151
0
0.0
(
0
)
Added by
Amir H. Safavi-Naeini
Publication date
2019
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they suffer from trade-offs between tuning voltage, tuning range, and on-chip area. Piezoelectric actuation could resolve all these challenges. Standard materials possess piezoelectric coefficients on the order of ${0.01}~text{nm/V}$, suggesting extremely small on-chip actuation using potentials on the order of one volt. Here we propose and demonstrate compact piezoelectric actuators, called nanobenders, that transduce tens of nanometers per volt. By leveraging the non-uniform electric field from submicron electrodes, we generate bending of a piezoelectric nanobeam. Combined with a sliced photonic crystal cavity to sense displacement, we show tuning of an optical resonance by $sim 5~text{nm/V}~({0.6}~text{THz/V})$ and between $1520$ and $1560~text{nm}$ ($sim 400$ linewidths) with only $ {4}~text{V}$. Finally, we consider other tunable nanophotonic components enabled by nanobenders.
rate research
Read More
Advances in the field of plasmonics, that is, nanophotonics based on optical properties of metal nanostructures, paved the way for the development of ultrasensitive biological sensors and other devices whose operating principles are based on localization of an electromagnetic field at the nanometer scale. However, high dissipative losses of metal nanostructures limit their performance in many modern areas, including metasurfaces, metamaterials, and optical interconnections, which required the development of new devices that combine them with high refractive index dielectric nanoparticles. Resulting metal-dielectric (hybrid) nanostructures demonstrated many superior properties from the point of view of practical application, including moderate dissipative losses, resonant optical magnetic response, strong nonlinear optical properties, which made the development in this field the vanguard of the modern light science. This review is devoted to the current state of theoretical and experimental studies of hybrid metal-dielectric nanoantennas and nanostructures based on them, capable of selective scattering light waves, amplifying and transmitting optical signals in the desired direction, controlling the propagation of such signals, and generating optical harmonics.
In this paper strain transfer efficiencies from single crystalline piezoelectric lead magnesium niobate-lead titanate (PMN-PT) substrate to a GaAs semiconductor membrane bonded on top are investigated using state-of-the-art x-ray diffraction (XRD) techniques and finite-element-method (FEM) simulations. Two different bonding techniques are studied, namely gold-thermo-compression and polymer-based SU8 bonding. Our results show a much higher strain-transfer for the soft SU8 bonding in comparison to the hard bonding via gold-thermo-compression. A comparison between the XRD results and FEM simulations allows to explain this unexpected result with the presence of complex interface structures between the different layers.
Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.
High-speed laser frequency actuation is critical in all applications employing lasers and frequency combs, and is prerequisite for phase locking, frequency stabilization and stability transfer among multiple optical carriers. Soliton microcombs have emerged as chip-scale, broadband and low-power-consumption frequency comb sources.Yet, integrated microcombs relying on thermal heaters for on-chip actuation all exhibit only kilohertz actuation bandwidth. Consequently, high-speed actuation and locking of microcombs have been attained only with off-chip bulk modulators. Here, we present high-speed microcomb actuation using integrated components. By monolithically integrating piezoelectric AlN actuators on ultralow-loss Si3N4 photonic circuits, we demonstrate voltage-controlled soliton tuning, modulation and stabilization. The integrated AlN actuators feature bi-directional tuning with high linearity and low hysteresis, operate with 300 nW power and exhibit flat actuation response up to megahertz frequency, significantly exceeding bulk piezo tuning bandwidth. We use this novel capability to demonstrate a microcomb engine for parallel FMCW LiDAR, via synchronously tuning the laser and microresonator. By applying a triangular sweep at the modulation rate matching the frequency spacing of HBAR modes, we exploit the resonant build-up of bulk acoustic energy to significantly lower the required driving to a CMOS voltage of only 7 Volts. Our approach endows soliton microcombs with integrated, ultralow-power-consumption, and fast actuation, significantly expanding the repertoire of technological applications.
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard-magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite-direction magnetic fields. The subsequent application of mechanical forces leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which further enables the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, imbue unmatched tunable properties to a new paradigm of metamaterials.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
