Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUniversal quantum logic in hot silicon qubits
89
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Quantum computation requires many qubits that can be coherently controlled and coupled to each other. Qubits that are defined using lithographic techniques are often argued to be promising platforms for scalability, since they can be implemented using semiconductor fabrication technology. However, leading solid-state approaches function only at temperatures below 100 mK, where cooling power is extremely limited, and this severely impacts the perspective for practical quantum computation. Recent works on spins in silicon have shown steps towards a platform that can be operated at higher temperatures by demonstrating long spin lifetimes, gate-based spin readout, and coherent single-spin control, but the crucial two-qubit logic gate has been missing. Here we demonstrate that silicon quantum dots can have sufficient thermal robustness to enable the execution of a universal gate set above one Kelvin. We obtain single-qubit control via electron-spin-resonance (ESR) and readout using Pauli spin blockade. We show individual coherent control of two qubits and measure single-qubit fidelities up to 99.3 %. We demonstrate tunability of the exchange interaction between the two spins from 0.5 up to 18 MHz and use this to execute coherent two-qubit controlled rotations (CROT). The demonstration of `hot and universal quantum logic in a semiconductor platform paves the way for quantum integrated circuits hosting the quantum hardware and their control circuitry all on the same chip, providing a scalable approach towards practical quantum information.
rate research
Read More
The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. In order to increase the number of qubits to the thousands or millions of qubits needed for practical quantum information we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for non-planar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Qubit addressability and readout are enabled by self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.
Quantum computation requires qubits that can be coupled and realized in a scalable manner, together with universal and high-fidelity one- and two-qubit logic gates cite{DiVincenzo2000, Loss1998}. Strong effort across several fields have led to an impressive array of qubit realizations, including trapped ions cite{Brown2011}, superconducting circuits cite{Barends2014}, single photonscite{Kok2007}, single defects or atoms in diamond cite{Waldherr2014, Dolde2014} and silicon cite{Muhonen2014}, and semiconductor quantum dots cite{Veldhorst2014}, all with single qubit fidelities exceeding the stringent thresholds required for fault-tolerant quantum computing cite{Fowler2012}. Despite this, high-fidelity two-qubit gates in the solid-state that can be manufactured using standard lithographic techniques have so far been limited to superconducting qubits cite{Barends2014}, as semiconductor systems have suffered from difficulties in coupling qubits and dephasing cite{Nowack2011, Brunner2011, Shulman2012}. Here, we show that these issues can be eliminated altogether using single spins in isotopically enriched siliconcite{Itoh2014} by demonstrating single- and two-qubit operations in a quantum dot system using the exchange interaction, as envisaged in the original Loss-DiVincenzo proposal cite{Loss1998}. We realize CNOT gates via either controlled rotation (CROT) or controlled phase (CZ) operations combined with single-qubit operations. Direct gate-voltage control provides single-qubit addressability, together with a switchable exchange interaction that is employed in the two-qubit CZ gate. The speed of the two-qubit CZ operations is controlled electrically via the detuning energy and we find that over 100 two-qubit gates can be performed within a two-qubit coherence time of 8 textmu s, thereby satisfying the criteria required for scalable quantum computation.
Electrons confined in Si quantum dots possess orbital, spin, and valley degrees of freedom (d.o.f.). We perform Landau-Zener-Stuckelberg-Majorana (LZSM) interferometry on a Si double quantum dot that is strongly coupled to a microwave cavity to probe the valley d.o.f. The resulting LZSM interference pattern is asymmetric as a function of level detuning and persists for drive periods that are much longer than typical charge decoherence times. By correlating the LZSM interference pattern with charge noise measurements, we show that valley-orbit hybridization provides some protection from the deleterious effects of charge noise. Our work opens the possibility of harnessing the valley d.o.f. to engineer charge-noise-insensitive qubits in Si.
Semiconductor spins are one of the few qubit realizations that remain a serious candidate for the implementation of large-scale quantum circuits. Excellent scalability is often argued for spin qubits defined by lithography and controlled via electrical signals, based on the success of conventional semiconductor integrated circuits. However, the wiring and interconnect requirements for quantum circuits are completely different from those for classical circuits, as individual DC, pulsed and in some cases microwave control signals need to be routed from external sources to every qubit. This is further complicated by the requirement that these spin qubits currently operate at temperatures below 100 mK. Here we review several strategies that are considered to address this crucial challenge in scaling quantum circuits based on electron spin qubits. Key assets of spin qubits include the potential to operate at 1 to 4 K, the high density of quantum dots or donors combined with possibilities to space them apart as needed, the extremely long spin coherence times, and the rich options for integration with classical electronics based on the same technology.
Quantum computers have the potential to efficiently solve problems in logistics, drug and material design, finance, and cybersecurity. However, millions of qubits will be necessary for correcting inevitable errors in quantum operations. In this scenario, electron spins in gate-defined silicon quantum dots are strong contenders for encoding qubits, leveraging the microelectronics industry know-how for fabricating densely populated chips with nanoscale electrodes. The sophisticated material combinations used in commercially manufactured transistors, however, will have a very different impact on the fragile qubits. We review here some key properties of the materials that have a direct impact on qubit performance and variability.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
