Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPhotonic integrated circuits in the continuum
162
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Waves that are perfectly confined in the continuous spectrum of radiating waves without interaction with them are known as bound states in the continuum (BICs). Despite recent discoveries of BICs in nanophotonics, full routing and control of BICs are yet to be explored. Here, we experimentally demonstrate BICs in a fundamentally new photonic architecture by patterning a low-refractive-index material on a high-refractive-index substrate, where dissipation to the substrate continuum is eliminated by engineering the geometric parameters. Pivotal BIC-based photonic components are demonstrated, including waveguides, microcavities, directional couplers, and modulators. Therefore, this work presents the critical step of photonic integrated circuits in the continuum, and enables the exploration of new single-crystal materials on an integrated photonic platform without the fabrication challenges of patterning the single-crystal materials. The demonstrated lithium niobate platform will facilitate development of functional photonic integrated circuits for optical communications, nonlinear optics at the single photon level as well as scalable photonic quantum information processors.
rate research
Read More
Nonlinear photonics based on integrated circuits has enabled applications such as parametric amplifiers, soliton frequency combs, supercontinua, and non-reciprocal devices. Ultralow optical loss and the capability for dispersion engineering are essential, which necessitate the use of multi-mode waveguides. Despite that rich interaction among different spatial waveguide eigenmodes can give rise to novel nonlinear phenomena, spatial mode interaction is typically undesired as it increases optical loss, perturbs local dispersion profile, and impedes soliton formation. Adiabatic bends, such as Euler bends whose curvature varies linearly with their path length, have been favoured to suppress spatial mode interaction. Adiabatic bends can essentially connect any two waveguide segments with adiabatic mode conversion, thus efficiently avoid mode mixing due to mode mismatch. However, previous works lack quantitative measurement data and analysis to fairly evaluate the adiabaticity, and are not based on photonic integrated circuits with tight optical confinement and optical losses of few dB/m. Here, we adapt, optimize, and implement Euler bends to build compact racetrack microresonators based on ultralow-loss, multi-mode, silicon nitride photonic integrated circuits. The racetrack microresonators feature a small footprint of only 0.21 mm^2 for 19.8 GHz FSR. We quantitatively investigate the suppression of spatial mode interaction in the racetrack microresonators with Euler bends. We show that the optical loss rate (15.5 MHz) is preserved, on par with the mode interaction strength (25 MHz). This results in an unperturbed microresonator dispersion profile. We further demonstrate single soliton of 19.8 GHz repetition rate. The optimized Euler bends and racetrack microresonators can be key building blocks for integrated nonlinear photonic systems, programmable processors and photonic quantum computing.
Optical beamforming networks (OBFNs) based on optical true time delay lines (OTTDLs) are well-known as the promising candidate to solve the bandwidth limitation of traditional electronic phased array antennas (PAAs) due to beam squinting. Here we report the first monolithic 1x8 microwave photonic beamformer based on switchable OTTDLs on the silicon-on-insulator platform. The chip consists of a modulator, an eight-channel OBFN, and 8 photodetectors, which includes hundreds of active and passive components in total. It has a wide operating bandwidth from 8 to 18 GHz, which is almost two orders larger than that of electronic PAAs. The beam can be steered to 31 distinguishable angles in the range of -75.51{deg} to 75.64{deg} based on the beam pattern calculation with the measured RF response. The response time for beam steering is 56 {mu}s. These results represent a significant step towards the realization of integrated microwave photonic beamformers that can satisfy compact size and low power consumption requirements for the future radar and wireless communication systems.
Conventional computing architectures have no known efficient algorithms for combinatorial optimization tasks, which are encountered in fundamental areas and real-world practical problems including logistics, social networks, and cryptography. Physical machines have recently been proposed and implemented as an alternative to conventional exact and heuristic solvers for the Ising problem, one such optimization task that requires finding the ground state spin configuration of an arbitrary Ising graph. However, these physical approaches usually suffer from decreased ground state convergence probability or universality for high edge-density graphs or arbitrary graph weights, respectively. We experimentally demonstrate a proof-of-principle integrated nanophotonic recurrent Ising sampler (INPRIS) capable of converging to the ground state of various 4-spin graphs with high probability. The INPRIS exploits experimental physical noise as a resource to speed up the ground state search. By injecting additional extrinsic noise during the algorithm iterations, the INPRIS explores larger regions of the phase space, thus allowing one to probe noise-dependent physical observables. Since the recurrent photonic transformation that our machine imparts is a fixed function of the graph problem, and could thus be implemented with optoelectronic architectures that enable GHz clock rates (such as passive or non-volatile photonic circuits that do not require reprogramming at each iteration), our work paves a way for orders-of-magnitude speedups in exploring the solution space of combinatorially hard problems.
Optical unitary converter (OUC) that can convert a set of N mutually orthogonal optical modes into another set of arbitrary N orthogonal modes is expected to be the key device in diverse applications, including the optical communication, deep learning, and quantum computing. While various types of OUC have been demonstrated on photonic integration platforms, its sensitivity against a slight deviation in the waveguide dimension has been the crucial issue in scaling N. Here, we demonstrate that an OUC based on the concept of multi-plane light conversion (MPLC) shows outstanding robustness against waveguide deviations. Moreover, it becomes more and more insensitive to fabrication errors as we increase N, which is in clear contrast to the conventional OUC architecture, composed of 2 $times$ 2 Mach-Zehnder interferometers. The physical origin behind this unique robustness and scalability is studied by considering a generalized OUC configuration. As a result, we reveal that the number of coupled modes in each stage plays an essential role in determining the sensitivity of the entire OUC. The maximal robustness is attained when all-to-all-coupled interferometers are employed, which are naturally implemented in MPLC-OUC.
Hybrid integrated semiconductor laser sources offering extremely narrow spectral linewidth as well as compatibility for embedding into integrated photonic circuits are of high importance for a wide range of applications. We present an overview on our recently developed hybrid-integrated diode lasers with feedback from low-loss silicon nitride (Si3N4 in SiO2) circuits, to provide sub-100-Hz-level intrinsic linewidths, up to 120 nm spectral coverage around 1.55 um wavelength, and an output power above 100 mW. We show dual-wavelength operation, dual-gain operation, laser frequency comb generation, and present work towards realizing a visible-light hybrid integrated diode laser.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
