Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAccurate modeling of the fringing field effect in liquid crystal based spatial light modulators
180
0
0.0
(
0
)
Authors
Simon Moser
Ask ChatGPT about the research
No Arabic abstract
Liquid crystal based spatial light modulators are widely used in applied optics due to their ability to continuously modulate the phase of a light field with very high spatial resolution. A common problem in these devices is the pixel crosstalk, also called the fringing field effect, which causes the response of these devices to deviate from the ideal behavior. This fringing effect decreases the performance of the spatial light modulator and is shown to cause an asymmetry in the diffraction efficiency between positive and negative diffraction orders. We use simulations of the director distribution to reproduce diffraction efficiency measurements of binary and blazed gratings. To overcome these limitations in performance, the simulations of the director distribution in the liquid crystal layer are used to develop a fast and precise model to compute the phase response of the spatial light modulator. To compensate the fringing field effect, we implement this model in phase retrieval algorithms and calculate the phase profile corresponding to a regular spot pattern as a generic example. With this method, we are able to increase the spot uniformity significantly compared to a calculation without considering the fringing field effect. Additionally, polarization conversion efficiencies of various simple phase patterns are simulated and measured for different orientations of the spatial light modulator. We found that the polarization conversion has the the smallest effect for a setup in which the liquid crystal molecules at the alignment layer lie in the plane of incidence of the light beam.
rate research
Read More
Optical implementation of artificial neural networks has been attracting great attention due to its potential in parallel computation at speed of light. Although all-optical deep neural networks (AODNNs) with a few neurons have been experimentally demonstrated with acceptable errors recently, the feasibility of large scale AODNNs remains unknown because error might accumulate inevitably with increasing number of neurons and connections. Here, we demonstrate a scalable AODNN with programmable linear operations and tunable nonlinear activation functions. We verify its scalability by measuring and analyzing errors propagating from a single neuron to the entire network. The feasibility of AODNNs is further confirmed by recognizing handwritten digits and fashions respectively.
We present a tunable liquid crystal device that converts pure orbital angular momentum eigenmodes of a light beam into equal-weight superpositions of opposite-handed eigenmodes and vice versa. For specific input states, the device may thus simulate the behavior of a {pi}/2 phase retarder in a given two-dimensional orbital angular momentum subspace, analogous to a quarter-wave plate for optical polarization. A variant of the same device generates the same final modes starting from a Gaussian input.
Optical diffraction tomography (ODT) is a three-dimensional (3D) label-free imaging technique. The 3D refractive index distribution of a sample can be reconstructed from multiple two-dimensional optical field images via ODT. Herein, we introduce a temporally low-coherence ODT technique using a ferroelectric liquid crystal spatial light modulator (FLC SLM). The fast binary-phase modulation provided by the FLC SLM ensures a high spatiotemporal resolution with considerably reduced coherent noise. We demonstrate the performance of the proposed system using various samples, including colloidal microspheres and live epithelial cells.
Spatial light modulators (SLMs) are central to numerous applications ranging from high-speed displays to adaptive optics, structured illumination microscopy, and holography. After decades of advances, SLM arrays based on liquid crystals can now reach large pixel counts exceeding 10^6 with phase-only modulation with a pixel pitch of less than 10 {mu}m and reflectance around 75%. However, the rather slow modulation speed in such SLMs (below hundreds of Hz) presents limitations for many applications. Here we propose an SLM architecture that can achieve high pixel count with high-resolution phase-only modulation at high speed in excess of GHz. The architecture consists of a tunable two-dimensional array of vertically oriented, one-sided microcavities that are tuned through an electro-optic material such as barium titanate (BTO). We calculate that the optimized microcavity design achieves a {pi} phase shift under an applied bias voltage below 10 V, while maintaining nearly constant reflection amplitude. As two model applications, we consider high-speed 2D beam steering as well as beam forming. The outlined design methodology could also benefit future design of spatial light modulators with other specifications (for example amplitude modulators). This high-speed SLM architecture promises a wide range of new applications ranging from fully tunable metasurfaces to optical computing accelerators, high-speed interconnects, true 2D phased array beam steering, and quantum computing with cold atom arrays.
Compact, lightweight and high-performance spatial light modulators (SLMs) are crucial for modern optical technologies. The drive for pixel miniaturization, necessary to improve their performance, has led to a promising alternative, active optical metasurfaces, which enable tunable subwavelength wavefront manipulation. Here, we demonstrate an all-solid-state programmable transmissive SLM device based on Huygens dielectric metasurfaces. The metasurface features electrical tunability, provided by mature liquid crystals (LCs) technology. In contrast to conventional LC SLMs, our device enables high resolution with a pixel size of ~1 um. We demonstrate its performance by realizing programmable beam steering, which exhibits high side mode suppression ratio of ~6 dB. By complementing the device with a 3D printed doublet microlens, fabricated using two-photon polymerization, we enhance the field of view up to ~80 degrees. The developed prototype paves the way to compact, efficient and multifunctional devices for next generation augmented reality displays, light detection and ranging (LiDAR) systems and optical computing.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
